Page 1
Operating and installation instructions Cooker hood To prevent the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-SA M.-Nr. 10 936 970...
Guide to the appliance .................. 12 Modes of operation ..................... 14 Before using for the first time ................ 15 Setting up Miele@home ..................15 Connecting via the app .................. 16 Connecting via WPS .................. 17 Sign out of WiFi (reset to factory settings) ............ 18 Setting up Con@ctivity ..................
They contain important notes on the safety, installation, use and maintenance of the appliance. Miele cannot be held liable for non- compliance with these instructions. Keep these instructions in a safe place and ensure that all users are familiar with the contents.
Page 5
Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the cooker hood unless they are constantly supervised. Children 8 years and older may only use the cooker hood unsupervised if they have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
Page 6
Unauthorised installation, maintenance and repairs can cause considerable danger for the user. Installation, maintenance and repairs must only be carried out by a Miele authorised technician. A damaged appliance can be dangerous. Check it for visible signs of damage. Do not use a damaged appliance.
Page 7
(such as a shelf). If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger. During installation, maintenance and repair work, the appliance...
Page 8
Warning and Safety instructions Correct use Never use a naked flame beneath the cooker hood. To avoid the danger of fire, do not flambé or grill over a naked flame. When switched on, the cooker hood could draw flames into the filter. Fat deposits could ignite, presenting a fire hazard.
Page 9
Warning and Safety instructions Correct installation Refer to the cooker or hob manufacturer's instructions as to whether a cooker hood may be operated above the cooker/hob. Safety regulations prohibit the fitting of a cooker hood over solid fuel stoves. ...
Page 10
The steam could reach electrical components and cause a short circuit. Accessories Only use genuine original Miele accessories and spare parts with this appliance. Using accessories or spare parts from other manufacturers will invalidate the guarantee, and Miele cannot accept liability.
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal.
Page 13
Guide to the appliance a Suspension cables b Canopy c Grease filters d Controls The symbols indicate sensor controls. Touch the sensor controls to select functions. A brief beep will sound for confirmation. e Hob lighting f Recirculation grille g Charcoal filters (x 4) h Sensor control for switching the fan on and off i Sensor control for the hob lighting j Sensor controls for selecting the fan power level...
Modes of operation Recirculation mode This cooker hoods operates solely in recirculation mode. The air is drawn in and cleaned first by the grease filters and then by four charcoal filters. The cleaned air is then recirculated back into the kitchen through ventilation grilles in the top of the cooker hood.
WiFi network. You will then be able to operate the cooker hood via the Miele@mobile app. If your Miele hob is connected to a home WiFi network, you can control the cooker hood automatically via the Con@ctivity function.
Before using for the first time Switch the cooker hood off. Connecting via the app The Miele@mobile app can be used to connect to your network. Install the Miele@mobile app on your Press and hold the B control.
Tip: If your WiFi router does not support WPS, please connect via the Press the B control on the cooker Miele@mobile app. hood after a few seconds. After a short while the 2 will light up constantly, and the 3 and the B will flash on and off.
Before using for the first time Sign out of WiFi (reset to factory settings) To set up a new WiFi connection, the Touch the 1 control. existing WiFi connection must be disconnected. Switch the cooker hood off. 2 will light up constantly, 3 will flash on and off.
Con@ctivity is the direct communication WiFi connection (Con@ctivity 3.0) or system between an electric Miele hob via a wireless connection (Con@ctivity and a Miele cooker hood. It enables the 2.0). cooker hood to operate automatically depending on the operational state of a Con@ctivity via the home WiFi Miele hob with onset controls.
(Con@ctivity 3.0) further details, see the hob operating instructions. Prerequisite: – WiFi enabled Miele hob When successfully connected the 2 and If you do not have a home network, you 3 will light up constantly. can establish a direct connection between the hob and the cooker hood.
(Con@ctivity 2.0) See the relevant installation instructions provided with the Prerequisite: Con@ctivity 2.0 stick. – Con@ctivity 2.0 enabled Miele hob Activating the wireless connection The cooker hood and the hob must installed and operational. Wireless connection must be activated on the cooker hood and the hob at the same time.
Page 22
Before using for the first time Activating the cooker hood The hob and cooker hood must be Touch the B control to activate switched off. Con@ctivity 2.0. Touch the run-on control for 2 will light up constantly, 3 will flash on approx.
Page 23
Before using for the first time Activating the hob Activation failed While the cooker hood is searching If connection cannot be established for a signal, start activating the hob. despite activating the Con@ctivity More information about this can be function on the cooker hood and hob, found in the Operating instructions the function must be deactivated on...
Page 24
Before using for the first time Touch the 1 control to deactivate Con@ctivity 2.0. 2 will light up constantly, 3 will flash on and off. After a few seconds 2 and 3 will start flashing on and off. The wireless connection has now been deactivated.
Operation (Automatic mode) When Con@ctivity 2.0 is active, the cooker hood always operates in Automatic mode (see “Setting up Con@ctivity 2.0”). If you wish to manually operate the cooker hood, see "Cooking without Con@ctivity. Examples for power levels 1 to B Cooking with Con@ctivity Reaction time (Automatic mode)
Page 26
Operation (Automatic mode) Cooking process Switching off If for example you switch on a Switch off all cooking zones. cooking zone at the highest power The cooker hood fan will reduce its level to heat a pan for frying and power level over the next few minutes reduce the power level after approx.
Operation (Automatic mode) You can also operate the cooker hood Leaving automatic mode manually for a complete cooking temporarily process. To leave automatic mode temporarily To do so switch the cooker hood fan during cooking: on before the hob. ...
Operation (Manual mode) Cooking without Con@ctivity Selecting the run-on time (Manual mode) It is advisable to run the fan for a few minutes after cooking has finished. This The cooker hood can be operated helps to remove any lingering vapours manually if: and odours from the air.
Operation (Manual mode) Dimming/switching the hob Power management lighting on/off The cooker hood features a power management system to help save The hob lighting can be switched on energy. The fan power level is reduced and off and dimmed independently of and the lighting is switched off the fan.
Operation (Manual mode) Switching Power management on/off Safety switch-off Switch off the fan and the lighting. If Power management has been deactivated, the cooker will switch itself Touch the run-on option control off automatically after 12 hours if it has for approx.
Operation (Automatic and Manual modes) Switch off the fan and the lighting. Operating hours counters Touch the run-on option control The number of hours the appliance has and the Grease filter control at the been in operation is stored in memory. same time.
Operation (Automatic and Manual modes) Altering the charcoal filter operating Reading the filter operating hours hours counter counter You can set the operating hours counter You can check the percentage of time to suit the type of cooking you do. set already used before the filter needs replacing.
Energy saving tips This cooker hood operates very – Use the Con@ctivity function. The efficiently and economically. The cooker hood will switch on and off following will help you to save even automatically at the optimum power more energy when using it: level for the cooking you are doing, which ensures low energy –...
Housing To help prevent re-soiling, a proprietary conditioning agent for General information stainless steel (available from Miele) can also be used. Follow the The surfaces and controls are manufacturer’s instructions on the susceptible to scratches and packaging.
Cleaning and care Removing a grease filter Grease filters When handling a grease filter, be An oversaturated filter is a fire careful not to drop it. hazard. This can result in damage to the filter The re-usable metal grease filters in the and the hob below.
Page 36
Cleaning and care Unsuitable cleaning agents After cleaning After cleaning, leave the filters to dry Unsuitable cleaning agents can cause damage to the surface of the filters if on an absorbent surface before used regularly. replacing them. Do not use: ...
Cleaning and care Resetting the grease filter operating Charcoal filters hours counter Four charcoal filters must be fitted in After cleaning, the operating hours addition to the grease filters. These are counter needs to be re-set. designed to absorb cooking odours. ...
. Charcoal filters are available to order from your Miele dealer (see end of this Resetting the charcoal filter booklet for contact details). operating hours counter...
Installation Before installation Before installation, it is important to read the information given on the following pages as well as the „Warning and Safety instructions“ at the beginning of this booklet. 4 sets of ceiling fixings for suspending the cooker hood, Assembly parts comprising 4 cables, 4 appliance fixings and 4 ceiling fixings.
Installation a Mains connection cable Safety distance between hob and cooker hood (S) When planning the installation height of your cooker hood, the minimum safety distance between the top of a cooker or hob and the bottom of the cooker hood is as follows, unless a greater distance is specified by the manufacturer of your cooking appliance.
Installation Installation recommendations – When deciding on the safety distance between the hob and cooker hood, please note that a distance of 650 mm above electric cookers/hobs may be preferable to give more working space under the hood. – Account should also be taken of the height of the person who will be using the hood most often.
Electrical connection The wires in the mains lead are Electrical connection coloured in accordance with the All electrical work should be following code: undertaken by a suitably qualified Green/yellow .........earth and competent electrician in strict accordance with current national and Blue ..........
In the event of a fault which you cannot remedy yourself, please contact your Miele dealer. Contact details your Miele dealer are given at the end of this booklet. N.B. A call-out fee will be charged for service visits where the problem could have been resolved as described in these instructions.
Technical data Fan motor 2 x 72 W Hob lighting 4 x 3 W Total connected load 156 W Voltage AC 230 V Fuse rating Mains connection cable length 1.8 m Weight 33 kg WiFi module Frequency band 2.412 - 2.462 GHz Maximum transmitting power <...