Miele DGC 7450 Operating And Installation Instructions page 95
Steam combination oven
Hide thumbs
Also See for DGC 7450:
- Operating and installation instructions (132 pages) ,
- Operating and installation instructions (132 pages)
Table of Contents
Advertisement
Problem
The sensors do not
respond.
Power cut -process
appears in the
cancelled
display.
appears in the
12:00
display.
Maximum operating hours
appears in the
reached
display.
and a fault code not
Fault
listed here appears in
the display.
Possible cause and remedy
You have selected the
When the steam combination oven is switched off,
the sensors do not respond.
As soon as the steam combination oven is switched
on, the sensors will respond. If you want the sensors
to always respond even when the steam
combination oven is switched off, select the
|
QuickTouch
On
The steam combination oven is not connected to the
power supply.
Check that the oven plug is correctly inserted into
the socket and switched on.
Check if the circuit breaker has tripped. Contact a
qualified electrician or Miele.
There is a fault with the controls.
Touch and hold the On/Off sensor until the
display switches off and the steam combination
oven restarts.
There has been a brief power cut. This has caused the
current cooking programme to stop.
Switch the steam combination oven off and back on
again.
Restart the cooking programme.
The power supply was interrupted for longer than 150
hours.
Reset the time and date.
The steam combination oven has been operating for
an unusually long time. This has triggered the safety
switch-off function.
Confirm with OK.
The steam combination oven is now ready to use
again.
A fault has occurred that you cannot resolve.
Call Miele.
Problem solving guide
|
Display
QuickTouch
setting.
|
setting.
Off
|
Display
95
Advertisement
Table of Contents
