Flush-Fit Installation - Miele SmartLine Operating And Installation Instructions
Induction cooktop
Hide thumbs
Also See for SmartLine:
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (80 pages)
Table of Contents
Advertisement
Flush-fit installation
Flush-fit installation is only possible in
natural stone (granite, marble), solid
wood and tiled worktops. For
installation in worktops made of other
materials, please consult the relevant
manufacturer as to whether their
worktops are suitable for flush-fit
installation.
The internal width of the base unit
underneath the appliance must be at
least as wide as the inner worktop cut-
out (see "Worktop cut-out for flush-fit
installation"), so that the SmartLine
appliance is easily accessible from
underneath after installation and the
bottom half of the casing can be
removed for maintenance. If the
appliance is not freely accessible from
below after installation, the sealant
must be removed so that the
appliance can be removed.
Installation notes
The SmartLine appliance is
– directly installed in a suitable cut-out
in a natural stone worktop,
– in a suitable cut-out in solid wood
and tiled worktops with a wooden
support frame. The frame must be
provided on site, and is not supplied
with the appliance.
53
Advertisement
Table of Contents
