Wipe Protection; Demonstration Mode; Displaying The Smartline Appliance Data - Miele SmartLine Operating And Installation Instructions
Induction cooktop
Hide thumbs
Also See for SmartLine:
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (80 pages)
Table of Contents
Advertisement
Additional functions
Wipe protection
You can lock the SmartLine appliance
sensor controls for 20 seconds in
order, for example, to remove soiling.
The sensor control is not locked.
Activating
Touch the sensor.
The time counts down in the timer
display.
Deactivating
Touch the sensor control until the
timer display goes out.
Demonstration mode
This function enables the SmartLine
appliance to be demonstrated in
showrooms without heating up.
Activating/Deactivating the
demonstration mode
Switch the SmartLine appliance on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 2 sensors at
the same time for 6 seconds.
In the timer display, flashes
alternately with (demonstration mode
activated) or (demonstration mode
deactivated) for a few seconds.
34
Displaying the SmartLine
appliance data
The model designation and software
version of the SmartLine appliance can
be displayed. To do this, there must not
be any pots or pans on the SmartLine
appliance.
Model designation
Switch the SmartLine appliance on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 4 sensor
controls at the same time.
The timer display shows 2 numbers
flashing alternately:
flashes alternately with = CS 1234
(example only)
Software version
Switch the SmartLine appliance on.
Touch the 0 sensor control on any of
the numerical keybanks.
Then touch the 0 and 3 sensor
controls at the same time.
Numbers will appear in the timer
display:
: = software version
Advertisement
Table of Contents
