Safety Switch-Off - Miele SmartLine Operating And Installation Instructions
Induction cooktop
Hide thumbs
Also See for SmartLine:
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (80 pages)
Table of Contents
Advertisement
Safety switch-off
Safety switch-off if the sensors are
covered
Your SmartLine appliance will turn off
automatically if one or several of the
sensor controls remain covered for
longer than 10 seconds, for example,
by finger contact, food boiling over or
by an object such as an oven glove or
tea towel. flashes briefly above the
sensor control and a tone will sound.
If you remove the obstruction and/or
clean the appliance, goes out and the
SmartLine appliance is ready for use
again.
Safety switch-off with an unusually
long cooking time
The safety switch-off mechanism is
triggered automatically if one of the
cooking zones is heated for an
unusually long period of time. This
period of time depends on the power
level selected. Once exceeded, the
cooking zone switches off and the
residual heat indicators light up. The
cooking zone can be operated again
after it has been switched off and back
on.
The cooktop is programmed to safety
setting 0 at the factory. If required you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Power level
range").
** Factory default setting
Safety features
Maximum operating time
[h:min]
Safety setting
0**
1
10:00
8:00
10:00
7:00
5:00
4:00
5:00
3:30
4:00
2:00
4:00
1:30
4:00
1:00
00:30
4:00
00:42
00:24
4:00
00:30
00:20
4:00
00:30
00:18
1:00
00:24
00:10
2
5:00
4:00
3:00
2:00
1:30
1:00
37
Advertisement
Table of Contents
