Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, the power
level of all cooking zones in use is re-
duced to power level 1.
The cooking zone power levels and the
timer settings cannot be altered; the
cooktop can only be switched off. The
kitchen timer, shut-off, Booster, and
heat-up times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activation/deactivation
Touch the sensor control.
Use this function if there is a danger of
food boiling over.
Additional functions
Wipe protection
The cooktop sensor controls can be
locked for 20 seconds, e.g., to remove
soiling. The sensor control is not
locked.
Activating
Touch the sensor control.
The time counts down in the timer dis-
play.
Deactivating
Touch the sensor control until the
timer display goes out.
Demo mode
This function enables the cooktop to be
demonstrated in dealer showrooms
without heating up.
Activation/deactivation
Switch the cooktop on.
Touch the 0 sensor control on any of
the numerical displays.
Then touch the 0 and 2 sensor con-
trols at the same time for 6 seconds.
In the timer display, flashes alter-
nately with (demo mode activated)
or (demo mode deactivated) for a
few seconds.
47
Advertisement
Table of Contents
