Table of Contents
Advertisement
Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1.
The power levels set for the cooking
zones and the timer settings cannot be
changed, the cooktop can only be
switched off. The minute minder,
switch-off, Booster and Auto heat-up
times continue to run.
When Stop & Go is deactivated, the
cooking zones will operate at the power
level previously selected.
If the function is not deactivated within
1 hour, the cooktop will switch off.
Activating/Deactivating
Touch the sensor.
Additional functions
Recall
If the SmartLine appliance is
accidentally switched off during use,
you can use this function to restore all
the settings. The SmartLine appliance
must be switched on again within
10 seconds.
Switch the SmartLine appliance on
again.
The previously set power levels flash.
Press one of the flashing power level
indicators immediately.
The appliance will continue to operate
using the settings selected previously.
37
Advertisement
Table of Contents
