Miele DG 6010 Operating And Installation Instructions page 71

Hide thumbs Also See for DG 6010:

Table of Contents

Coupling seal

 If, after prolonged use, the water con‐

tainer becomes difficult to remove

and replace or the fault message 

appears, rub a small amount of the

silicone grease supplied (see "Over‐

view - Accessories supplied") into the

inside of the coupling seal.

Do not take the seal out to lubricate it.

Misuse of silicone grease!

Remove any silicone grease from

your skin either by wiping it off or by

washing it off.

If the grease gets into the eyes, it

must be rinsed out with plenty of

clean water.

If it is swallowed, seek medical ad‐

vice.

 The coupling seal should be replaced

with a new one if it becomes brittle or

porous or if an unusually large

amount of water collects on the floor

of the water container compartment.

Coupling seals can be ordered from

Miele (see the end of this booklet for

contact details).

Cleaning and care

Only use the silicone grease sup‐

plied. On no account must margarine

or oil or any other domestic grease

or fat be used, as these can cause

the seal to swell.

Table of Contents

Show Quick Links

Table of Contents