Related Manuals for Miele PWM 507
Summary of Contents for Miele PWM 507
- Page 1 Operating and installation Instructions Washing machine It is essential to read these operating instructions before installing and using the appliance. This prevents both personal injury and damage to the appliance. en-AU, NZ M.-Nr. 12 714 930...
- Page 2 Contents Caring for the environment ..................Warning and Safety instructions ................Operating the washing machine................13 Control panel........................13 Symbols on the control panel..................14 Symbols in the display....................15 Sensor controls and touch display with sensor controls.......... 16 Main menu ........................16 Examples on how to operate the appliance ...............
- Page 3 Contents Detergent ........................49 The correct detergent ....................49 Cleaning and care ......................50 Cleaning the external casing and fascia panel ............50 Cleaning the detergent dispenser drawer ..............50 Cleaning the drum, suds container and drainage system ........52 Cleaning the sealing ring ....................
- Page 4 Contents Supervisor level......................80 Code-based access ....................... 80 Changing the code ......................80 Opening the Supervisor level..................80 Exiting the Supervisor level................... 80 Language.......................... 81 Brightness........................81 Clock display ........................81 Finish tone volume ......................81 Keypad tone ........................81 Welcome tone volume....................
- Page 5 Hygiene ..........................87 Automatic dispensing ....................87 Adjustment value dosage 1–6 ..................88 COM module selection ....................88 Availability of Miele digital products................88 Wi-Fi/LAN ........................88 Network time ........................89 Peak load signal ......................90 Peak load prevention...................... 90 Remote..........................
- Page 6 Caring for the environment Disposal of the packing material Disposing of your old appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for disposal, also contain specific materials, and can normally be recycled.
- Page 7 “Installation”, as well as in the “Warning and Safety instructions”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner.
- Page 8 Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). Unauthorised repairs could result in unforeseen dangers for the ...
- Page 9 For further information see “Installation - Electrical connection”. If the electrical connection cable is faulty, it must only be replaced by a Miele authorised service technician to protect the user from danger. The washing machine must be connected to the water supply ...
- Page 10 The protective measures provided in the building installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or replaced with equivalent measures in the installation.
- Page 11 Special descaling agent is available from your Miele dealer or from Miele. Strictly observe the instructions for the packaging. For textiles that have been treated with solvent-based cleaning ...
- Page 12 Please ensure that the washer-dryer stacking kit is suitable for your Miele tumble dryer and your Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
- Page 13 Operating the washing machine Control panel a language sensor e Optical interface For selecting the current user For service technicians. language. f Programme selector The operating language is displayed For selecting the wash programme. again at the end of the programme. The programme selector can be b Touch display with sensors turned clockwise or anti-clockwise.
- Page 14 Operating the washing machine Symbols on the control panel Cottons Cottons/ Special programmes Express Minimum iron Delicates ECO 40-60 Cottons ECO 40-60 / Drain/Spin...
- Page 15 Operating the washing machine Symbols in the display Temperature: Use the Temperature sensor to set the temperature of the wash programme. Spin speed: Use the Spin speed sensor to set the spin speed of the wash programme. Extras: Use the Extras sensor to add Extras to a wash programme. ...
- Page 16 Operating the washing machine Sensor controls and touch Main menu display with sensor controls The main menu of a wash programme displays different values depending on The , and Start/Stop sensors the programme. and the sensor controls in the display react to finger contact. Every touch of a For programmes with a fixed sensor is confirmed by an audible tone.
- Page 17 Operating the washing machine Examples on how to operate the appliance Selection lists Finish (today) The and arrows on the right of the display indicate that further choices are available. Touch the and arrows and confirm with the OK sensor. čeština dansk ...
- Page 18 A swivel elbow for the drain hose and/or during the initial commissioning assembly material may be stored in the process. After that, they must be drum. changed by Miele. Complete the initial commissioning process. These settings are also described in “Supervisor level”.
- Page 19 Using for the first time Setting the display language Setting the display brightness You will be asked to select the language for the display. You can change the language at any time (see “Supervisor level - Language”). Brightness – čeština dansk ...
- Page 20 Using for the first time The display switches back to the Setting the time of day programme packages. Disinfection I Time Programme packages Continue Use the and sensor controls to ...
- Page 21 Using for the first time Switching on automatic Selecting pre-wash water dispensing Automatic dispensing can be activated via the or the XCI box COM module Cold Pre-wash water Touch the sensor if the washing Automatic Cold dispensing XCI box machine is only connected to the cold...
- Page 22 Using for the first time Removing the transit bars. Completing the commissioning process The display will remind you to remove the transit bars. To complete commissioning, the commissioning programme must be run Damage resulting from failure to without laundry and without detergent. remove the transit bars.
- Page 23 Washing environmentally and economically Energy and water consumption Detergent consumption - Use the maximum load size for the - Do not exceed the amounts of current programme. The energy and detergent recommended by the water consumption will then be the manufacturer on the packaging.
- Page 24 1. Preparing the laundry Emptying all pockets Damage due to solvent-based cleaning agents. Cleaning agents containing benzine, stain remover, etc., can damage plastic parts. When pre-treating garments, make sure that any plastic parts (e.g. buttons) do not come into contact with cleaning agent.
- Page 25 2. Loading the washing machine Opening the door Closing the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
- Page 26 3. Selecting a programme Selecting special programmes via the Switching on the washing programme selector position machine Press the button. The interior drum lighting will come on. The drum lighting will go out automatically after five minutes or after the programme start.
- Page 27 4. Selecting programme settings Selecting the temperature Selecting Extras You can alter the preset temperature of You can select Extras for the wash certain programmes. programmes. Touch the Temperature sensor. For some programmes, an Extra is offered directly in the main menu. The following will appear in the display: ...
- Page 28 4. Selecting programme settings Selecting further options You can activate CapDosing, select a Delay start time or change the settings of the washing machine. Touch the sensor. The following will appear in the display: CapDosing Further selections Finish at ...
- Page 29 5. Adding detergent There are several options for adding Adding detergent detergent. Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Detergent dispensing Please follow the detergent manufacturer's instructions in relation to dosage.
- Page 30 5. Adding detergent Adding fabric softener or liquid starch Adding starch separately separately Prepare the starch solution in Select the Separate rinse programme. accordance with the manufacturer’s instructions on the packaging. Change the spin speed if necessary. Select the Starch programme. ...
- Page 31 Each capsule contains the correct amount for one wash cycle. Capsules are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Capsules pose a health risk.
- Page 32 Dispose of opened capsules. External dispensing The washing machine is pre-equipped for connection to an external detergent dispensing system. A separate conversion kit for external dispensing systems is required. This must be fitted by a Miele authorised service technician.
- Page 33 6. Starting the programme - the end of the programme Payment system At the end of the programme If your machine is connected to a The door remains locked during the anti- payment system, the amount of crease phase. However, the door can be payment required will appear in the unlocked at any time by touching the display.
- Page 34 Delay start The Delay start function can be used to Cancelling or changing Delay set the time until the programme starts start or the programme finish time (see Touch the Start/Stop sensor. “Supervisor level - Delay start”). The following will appear in the display: Selecting Delay start Start programme ...
- Page 35 Programme chart Standard programmes Cottons 20°C to 90°C Max. load 7.0 kg Items Cotton, linen, and mixed fibre textiles Notes - Select the temperature according to the instructions on the care label, the detergent, the type of soiling and the hygiene requirements.
- Page 36 Programme chart 30°C Max. load 2.5 kg Delicates Items Delicate garments made from synthetic fibres, mixed fibre, rayon and viscose Notes - Deselect the final spin speed for fabrics which crease easily. 600 rpm Extras: Pre-wash , Pre-ironing Rinse cycles: 2 ECO 40-60 Max.
- Page 37 Programme chart Special programmes Towelling 40°C to 60°C Max. load 7.0 kg Items Towels and bathrobes made from terrycloth Notes - Use a colour detergent for dark textiles. 1400 rpm Extras: Pre-wash Rinse cycles: 2 Shirts 20°C to 60°C Max.
- Page 38 Programme chart Cottons PRO 60°C Max. load 7.0 kg Items Mixed fibre textiles (50% cotton and 50% polyester) Notes - Extra energy-efficient wash programme for commercial cotton or cotton/synthetic blend textiles with moderate levels of soiling, e.g. workwear. 1400 rpm Extras: Pre-wash ...
- Page 39 Programme chart Programme packages You can select various programmes packages. The programmes selected from the programme packages are displayed under the Special programmes list. Sport Sportswear 30°C to 60°C Max. load 3.0 kg Items Sports and leisure wear, such as jersey shirts and trousers made from synthetic fibres or mixed blends Notes - Do not use fabric softener.
- Page 40 Programme chart Outdoor Down Items 30°C to 60°C Maximum 1 item Items Outdoor jackets, sleeping bags, pillows and other down-filled items Notes - Do not use fabric softener. - Remove any air before washing. To do this, either push the items into a narrow laundry bag to compress them or tie the items together with a washable strap.
- Page 41 Programme chart Wellness/Hair salons Towels 40°C Max. load 5.5 kg Items Lightly soiled cotton towelling Notes - Use a colour detergent for dark textiles. 1400 rpm Rinse cycles: 2 Towels plus 40°C to 80°C Max. load 5.5 kg Items Heavily soiled cotton towelling Notes - Use a colour detergent for dark textiles.
- Page 42 Programme chart Home textiles Lightweight curtains Cold to 40°C Max. load 3.5 kg Items Curtains specified as machine-washable by the manufacturer Notes - For curtains which crease easily, deselect the spin speed. 600 rpm Extras: Pre-wash , Rinse plus Rinse cycles: 2 Down bedding 40°C to 75°C 1 duvet...
- Page 43 Programme chart Workwear Oil/fat special 60°C to 90°C Max. load 7.0 kg Items Work coats, work jackets, hats, cleaning cloths made from cotton or mixed fibres Notes - Activate Pre-wash for heavy soiling. - Use liquid detergent. 1400 rpm Extras: Pre-wash Rinse cycles: 3 Dust/flour special 40°C to 90°C...
- Page 44 Programme chart Disinfection 85°C / 15 min Max. load 7.0 kg Disinfection Items Cotton or mixed fibre textiles Notes - Thermal disinfection with a 15-minute holding time at 85°C. - A second disinfection rinse can be activated via the Supervisor level. - No water inlet via the fabric softener compartment. 1400 rpm Extras: Pre-wash , Rinse plus ...
- Page 45 Extras You can supplement the wash Pre-wash programmes with Extras. A pre-wash can be added for heavily Not all Extras can be selected with soiled laundry. Coarse soiling is every programme. If an Extra is not loosened and removed before the main listed, it is not permitted for use with wash.
- Page 46 Special features in the programme sequence Spinning Anti-crease At the end of the programme, the drum Final spin speed continues to turn at intervals for up to When a programme is selected, the 30 minutes to help prevent creasing. maximum spin speed for this wash The door can be opened at any time programme is shown in the display.
- Page 47 Changing the programme sequence If you want to select a different A programme cannot be cancelled or programme: changed when operating a payment system. Close the door. Select the required programme. Changing a programme Add detergent to the detergent After the start of a programme, it is no dispenser drawer, if necessary.
- Page 48 Changing the programme sequence Adding or removing laundry Once a programme has started successfully, the washing machine You can add or remove items during the cannot recognise any adjustment to first few minutes after the programme the load. has started. For this reason, if laundry is added or ...
- Page 49 Detergent The correct detergent Any detergent suitable for automatic front loading washing machines can be used with this appliance. Follow the manufacturer's instructions and dosage recommendations on the packaging. The recommendations apply to the temperature ranges given in the Programme chart.
- Page 50 Cleaning and care Cleaning the detergent Risk of electric shock! dispenser drawer Only ever perform cleaning and maintenance work when the Washing at low temperatures and the appliance is disconnected from the use of liquid detergent can lead to a power.
- Page 51 Cleaning and care Cleaning the siphon and the channel Cleaning the detergent dispenser drawer housing Pull the siphon out of the Use a bottle brush to remove compartment. detergent residues and limescale Clean the siphon under warm running from the jets inside the detergent water.
- Page 52 Cleaning and care Cleaning the drum, suds Cleaning the sealing ring container and drainage system By using wash programmes of 60°C or more on a regular basis and using a multi-purpose detergent, you can avoid the build-up of bacteria in the washing machine.
- Page 53 Cleaning and care Cleaning the filters in the water inlet The washing machine has filters to protect the water inlet valves. Check these filters about every 6 months or more often if there are frequent interruptions to the external water supply.
- Page 54 With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you will not need a service call.
- Page 55 Miele. electricity supply. Wait at least 2 minutes before reconnecting the washing machine to the electricity. Then switch the washing machine on again. Start the programme again. If the fault message appears again, contact Miele.
- Page 56 Please call Then switch the washing machine on again. Miele. If the message appears again, contact Miele. The washing machine can continue to be used. Touch the OK sensor. The messages will appear at the end of the programme and when the washing...
- Page 57 Problem solving guide An unsatisfactory wash result Problem Possible cause and remedy Liquid detergent does Liquid detergents usually contain no bleaching agents. not give the required They do not remove fruit, coffee and tea stains. result. Use a general purpose powder detergent containing a bleaching agent.
- Page 58 Problem solving guide General problems with the washing machine Problem Possible cause and remedy The machine shakes The machine feet are not level. during the spin cycle. Level the machine and adjust the feet correctly. The pump makes This is not a fault. Slurping noises occur at the end of strange noises.
- Page 59 Problem solving guide Problem Possible cause and remedy There is water next to The CapDosing sensor was not activated or an empty the capsule in the fabric capsule was not removed at the end of the last wash softener compartment. programme.
- Page 60 Wait until the temperature in the drum has or after a programme decreased and the message has gone out in the has been cancelled. display. The following appears in The door lock has jammed. the display: Call Miele. The door lock is jammed. Call Miele.
- Page 61 Problem solving guide Emptying the drum Opening the door in the event of a blocked drain outlet and/or ..in machines with a drain pump power cut Place a suitable container under the access flap. Risk of electric shock! Only ever perform cleaning and Remove the drain filter, though not maintenance work when the...
- Page 62 Problem solving guide Cleaning the drain filter Risk of water damage. Once the flow of water ceases: Make sure the drain filter is securely tightened. Otherwise there is a risk of water leakage during use. Replace the drain filter correctly and tighten it securely.
- Page 63 Problem solving guide Emptying the drum Opening the door ...in machines with a drain valve Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry.
- Page 64 Miele. Miele. Contact information for Miele can be found at the end of this booklet. Please quote the model and serial number of your appliance when contacting Miele. This information can be found on the data plate.
- Page 65 *INSTALLATION* Installation Front view a Cold water inlet hose e Detergent dispenser drawer b Hot water inlet hose f Door c Electrical connection g Access to drain filter, drain pump or valve and emergency release d Control panel h Height-adjustable feet...
- Page 66 *INSTALLATION* Installation Rear view a Electrical connection g Safety caps for transit bars b Interface for communicating with h Transport clips for hoses external devices i Drain pipe (DV version) c Socket for external dispensing j Module slot (for external system communication module) d Drain hose (DP version)
- Page 67 Do not install the washing machine near or directly above an open gully This washing machine can be installed or floor drain. with a Miele tumble dryer on top of it. This requires a Miele washer-dryer stacking kit which can be purchased separately.
- Page 68 *INSTALLATION* Installation Transporting the washing machine to Transporting the washing its installation site machine to its installation site The protruding lid can be used for Danger of injury from incorrect holding the machine during transport. transport. Danger of injury due to If the washing maching tips over, unsecured lid.
- Page 69 *INSTALLATION* Installation Installation surface Removing the transit bars A concrete floor is the most suitable Removing the left transit bar installation surface. It is far less prone to vibration during the spin cycle than wooden floorboards or a carpeted surface. ...
- Page 70 *INSTALLATION* Installation Removing the right transit bar Covering the holes Risk of injury from sharp edges! There is a risk of injury from reaching into holes that are not covered. The holes for the transit bars must be covered after the transit bars have been removed.
- Page 71 *INSTALLATION* Installation Securing the transit bars Fitting the transit bars Opening the flaps Secure the transit bars to the back of Push against the catch with a pointed the washing machine. object, e.g. a narrow screwdriver. Useful tip: Make sure that the holes The flap will open.
- Page 72 *INSTALLATION* Installation Aligning the washing machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine.
- Page 73 *INSTALLATION* Installation Fixing bracket for plinth The fixing bracket prevents the washing machine from falling off a plinth during operation. Fastening with the fixing bracket is only intended for plinths made from concrete. The plinth must be flat and level. The surface below the plinth must be able to withstand the physical loads.
- Page 74 Payment system This machine can be fitted with a payment system (optional accessory). The necessary reprogramming must be carried out by Miele. Coins/tokens must be removed from the coin box regularly. Otherwise, the payment system will become blocked. Insert the appliance feet (the part between the foot and the locknut) into the openings in the fixing bracket.
- Page 75 Longer hoses with a length of 2.5 m or The flow pressure must amount to a 4.0 m are available from Miele as minimum of 100 kPa (1 bar) and must optional accessories (depending on not exceed an overpressure of 1000 kPa country).
- Page 76 *INSTALLATION* Installation Hot water connection* IMPORTANT Australia and New Zealand The hot water temperature must not exceed 70°C. This appliance must be connected to To minimise energy consumption during the water supply in strict accordance operation with hot water, the washing with local and national requirements machine should be connected to a (e.g.
- Page 77 (gully). If required, the hose can be extended to a length of up to 5 m. The necessary parts can be ordered from Miele (depending on country). For a delivery head of more than 1 m (up to a max. of 1.6 m) a replacement drain pump will need to be fitted.
- Page 78 Do not connect the machine to an diagram. Conversion may only be extension lead or multi-socket adapter performed by Miele or a Miele as they do not guarantee the required authorised service technician. safety of the appliance (e.g. danger of overheating).
- Page 79 Technical data Height 850 mm Width 596 mm Width (for appliances with a stainless steel 605 mm lid) Depth 714 mm Depth with door open 1,132 mm Weight Approx. 100 kg Maximum floor load in operation 3000 newtons Capacity 7.0 kg dry laundry Supply voltage See data plate on back of machine Rated load See data plate on back of machine Fuse rating...
- Page 80 XCI box. machine from unauthorised access. Exiting the Supervisor level Please inform Miele if you have forgotten your new code. Miele will Touch the sensor or switch off the have to reset the code.
- Page 81 Supervisor level Language Keypad tone The display can be set to appear in one The volume of the tone that sounds of several different languages. You can when a sensor is touched can also be selected the permanent operator changed. language via the Language submenu.
- Page 82 Supervisor level Anti-crease "Display" switch-off status The anti-crease function helps prevent To save energy, the display goes out creasing if laundry is not going to be and the Start/Stop sensor flashes removed immediately after the end of slowly. the programme. Changing this setting leads to increased The drum continues to turn at intervals energy consumption.
- Page 83 Supervisor level Delay start Programme name The type of time input for the Delay When selecting a standard start function can be changed or programme, the name of the selected switched off. programme is shown in the display. - Off - On (factory setting) The Delay start function is not When a programme is selected, the...
- Page 84 Supervisor level Main wash water Final rinse water You can select the type of water for You can select the water type for the the main wash. final rinse in some programmes. - Cold - Cold (factory setting) Only cold water is used for the main Only cold water is used for the final wash.
- Page 85 Supervisor level Early warning counter Wash time pre-wash An internal counter reports when an In the Cottons programme, you can external dispenser container is almost extend the duration of the pre-wash. empty. The counter in question then - + 0 min (factory setting) has to be reset.
- Page 86 Supervisor level Pre-rinse Cottons Minimum iron rinses In the Cottons programme, a pre-rinse In the Minimum iron programme, you can be activated. can change the number of rinse cycles that are carried out. Factory setting: Off - 2 rinse cycles (factory setting) Pre-rinse Minimum iron - 3 rinse cycles In the Minimum iron programme, a...
- Page 87 Supervisor level After selecting the programme CapDosing packages, the individual programmes You can choose whether is CapDosing from the list are activated. Activated displayed in the Further selections list. programmes are marked with a frame. The selection must then be confirmed. Factory setting: On Disinfection prog.
- Page 88 The calibration value and the adjustment value must be added to the - Setup data for the dispenser pumps by Miele This message only appears if the Customer Service. washing machine has not yet been COM module selection connected to a Wi-Fi network.
- Page 89 - as a slave Soft AP The machines are in a network with Activate the function with the Miele internet connection. All machines are App on your smart device within configured as slaves. Data is 10 minutes. synchronised over the Internet.
- Page 90 However, connected to the washing machine via Miele recommends installing the Miele XCI box. RemoteUpdates. - No function (factory setting) Running a RemoteUpdate - Peak load with 230V...
- Page 91 These items of software/ software components are protected by The message is displayed every 500 copyright. The copyright powers of operating hours. Miele and third parties must be The message appears at the end of the respected. programme. In addition, the machine contains...
- Page 92 Feedback signal to pay system Payment system If you wish to change the settings later, Setting the feedback signal for the please contact Miele. payment system. The XCI-AD or XCI box accessory unit - Factory setting: Off is required to connect a payment - Programme end system.
- Page 93 Supervisor level Payment system lock FOC programmes To avoid tampering, a programme lock In payment system mode, you can can be set up in programme operation. decide whether the Drain/Spin If the lock is applied, the programme is programme can be used for free. interrupted and payment credit is lost Factory setting: Off as soon as the door is opened.
- Page 95 Miele New Zealand Limited IRD 98 463 631 8 College Hill Freemans Bay Auckland 1011 New Zealand Telephone: 0800 4 MIELE (0800 464 353) www.miele.com.au/professional professional.sales@miele.com.au Miele Global Headquarters: Miele & Cie. KG Carl-Miele-Straße 29, 33332 Gütersloh, Germany...
- Page 96 PWM 507 en-AU, NZ M.-Nr. 12 714 930 / 00...