Removing The Transit Bars; Commissioning Twindos - Miele WWH 860 Operating Instructions Manual
Hide thumbs
Also See for WWH 860:
- Operating instructions manual (116 pages) ,
- Operating and installation instructions (100 pages) ,
- Operating instructions manual (100 pages)
Table of Contents
Advertisement
Before using for the first time
3. Removing the transit bars
Damage resulting from failure to
remove the transit bars.
Failure to remove the transit bars can
result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the transit bars as described
in "Installation".
The following message appears in the
display:
Remove transit bars
Confirm with the OK sensor.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2
values are preset in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with the OK sensor.
The following message appears in the
display:
Set now
To set up TwinDos now, touch the OK
sensor.
To postpone set-up until later, touch
the sensor until the following
appears in the display:
press OK to confirm.
20
and
Set later
Settings for compartment
The UltraPhase 1 values are preset in
the standard settings.
Agent for
Confirm with the OK sensor.
Miele UltraPhase 1
Confirm with the OK sensor.
The following appears in the display:
Set the dosage. Observe water hardness
level
Confirm with the OK sensor.
The dispensing quantity for
UltraPhase 1 for (hardness range I)
is preset.
Per load
Confirm the preset value with the
OK sensor. If you want to change this
value, use the sensors and
confirm with the OK sensor.
UltraPhase 1
Hardness level I
Hardness level II
Hardness level III
OK
OK
46
ml
OK
46 ml
58 ml
70 ml
Advertisement
Table of Contents
