Page 1
Operating and Installation Instructions Washer To prevent accidents and appliance damage, read these instructions before installation or use. en-US M.-Nr. 10 669 410...
Environmentally friendly washing .............. 15 Before using for the first time ................ 16 1. Setting the display text..................17 2. Setting up Miele@home ..................17 3. Removing the shipping struts ................19 4. Commissioning TwinDos ................... 19 5. Starting the calibration program................ 22 1.
Page 3
Changing the program ..................50 Child lock....................... 51 Adding or removing laundry .................. 51 Detergent ...................... 52 Miele-recommended detergents ................52 General detergent recommendations..............53 Cleaning and care .................... 54 Cleaning the drum (Hygiene info) ................54 Cleaning the exterior and control panel ..............54 Cleaning the detergent dispensing drawer ............
Page 4
Contents Frequently Asked Questions ................ 59 A wash program cannot be started............... 59 The following fault message appears in the display and the program has been canceled ....................60 A message appears in the display at the end of the program or when the appliance is switched on.................
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by providing a path of least resistance for electric current.
Page 8
If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
Page 9
IMPORTANT SAFETY INSTRUCTIONS Do not allow children to play on or in the appliance. Close supervision is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high temperatures. Do not touch the glass. Danger of burns! Keep children away from the washer when in use.
Page 10
Miele tumble dryer and the Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
Page 11
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Operation and is subject to the following conditions: These devices may not cause harmful interference.
Guide to the washer Control panel a Control field d OK sensor button The control field consists of a Confirm the selected values, such as display and various sensor buttons. temperature and spin speed, with The individual sensor buttons are the OK sensor button.
Guide to the washer g Sensor buttons for extra options k Start/Stop sensor button You can supplement the wash Touching the Start/Stop sensor programs with extra options. button starts the selected program If a wash program has been or cancels a program that has selected, the sensor buttons for the already been started.
Guide to the washer Setting numerical values Display The standard display shows the Start in following values from left to right: The numerical value is highlighted in Warm + Max 1:26 white. Touching the sensor button ...
– Washing at low temperatures and/or the subsequent tumble dryer cycle. using liquid detergents can cause bacteria and odors to build up in the washing machine. Miele therefore recommends cleaning the washing machine once every month. The washing machine provides you with a reminder with the message Sanitize info: Run a high temp.
Before using for the first time Remove the detergent Before initial commissioning, please cartridges and the drain hose note the information in "Installation and connection". elbow from the drum Two detergent cartridges for automatic Removing the protective foil detergent dispensing and an elbow and stickers piece for the drain hose are stored in the drum.
The following message appears in the program selector to the Additional display: programs/ position in the Settings Set up now sub-menu. To set up Miele@home now: Touch the OK sensor button. english (USA) ...
Page 18
Before using for the first time Miele@mobile App Connecting via the app The Miele@mobile App is available to The Miele@mobile app can be used to download free of charge from the Apple connect to your network. ® App Store or from the Google Play ...
Remove the shipping struts as Confirm with the OK sensor button. described in the "Installation" section. Miele UltraPhase 1 The following message appears in the display: Confirm with the OK sensor button.
Page 20
Before using for the first time The following will appear in the display: The flap will spring open. Insert Open the flap. Remove the stopper from the detergent cartridge. Push the UltraPhase 1 detergent cartridge into compartment until it locks into position.
Page 21
Agent for Confirm with the OK sensor button. Miele UltraPhase 2 Confirm with the OK sensor button. Remove the stopper from the detergent cartridge. The dispensing quantity for UltraPhase 2 for (hardness level I) is pre-set.
Before using for the first time 5. Starting the calibration program For optimum water and energy consumption and excellent wash results, it is important to calibrate the washing machine. To do this, the Normal program must be run without laundry and without detergent.
1. Prepare the laundry Solvent-based cleaners (e.g., benzene) can damage plastic parts. When pre-treating a stain, make sure that plastic parts do not come into contact with cleaning agent. Chemical (solvent-based) cleaning agents can cause damage in the washing machine. Never use such cleaning agents in the washing machine! ...
2. Selecting a program 2. Selecting additional programs by Switching on the washing setting the program selector to the machine "More programs/" position and the Turn the program selector to a display: program. The interior drum lighting will come on. The drum lighting will go out automatically after five minutes.
Page 25
2. Selecting a program 3. Selecting the programs via the MobileControl program selector position and the Miele@mobile app Tip: In order to use MobileControl , the washing machine must be logged on to the WiFi network and the Remote control must be switched on.
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it Make sure that no items are caught open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
4. Selecting program settings Extras sensor button Selecting a temperature/spin speed You can select additional extras using the Extras sensor button. You can alter the preset temperature/ Touch the Extras sensor button. spin speed of a wash program if this is permitted by the program.
4. Selecting program settings Level of soiling Setting the delay start time Touch the sensor button. You can specify the level of soiling of the load. The following will appear in the display: – Light ...
Page 29
4. Selecting program settings Canceling delay start Setting the timeframe The selected delay start time can be If you have activated the SmartGrid canceled before the program start. function in Settings, SmartStart in instead of will appear in the Start in ...
UltraPhase 1 and – Using the Booster cap and activating UltraPhase 2 single use cartridges are the CapDosing available to order from your Miele dealer or via Miele online store. – Using chlorine bleach via the compartment in the detergent...
5. Adding detergent Tips for dispensing Detergent dispenser drawer Adjust the detergent dosage to the level This washing machine requires high of soiling of the laundry and the efficiency detergent. Adhere strictly to maximum load. Reduce the amount of the dispensing amounts supplied by the detergent with smaller loads (e.g., detergent manufacturer.
5. Adding detergent Using chlorine bleach Using powder detergent The detergent dispenser drawer Chlorine bleach is a very contains an insert for liquid detergent in aggressive substance. the compartment. This insert must It can cause damage to the colors be removed to use powder detergent.
Capsules are available to order from Miele's online store, Miele's customer Add the fabric softener or the liquid service, or from your Miele dealer. starch to the compartment. Do not exceed the maximum level mark. It will be automatically dispensed in the final rinse cycle.
Page 34
5. Adding detergent Activating CapDosing Touch the sensor button. The following appears in the display: No Cap Touch the sensor buttons until the capsule you want appears in the display. ...
Page 35
5. Adding detergent The contents of the capsule will be Dyes / dye removers added to the wash program at the Do not use dye removers in this correct time. washer! During CapDosing, water intake to the compartment is solely via the The use of dyes in the washer is capsule.
6. Start the program - Program end Pull open the door. Starting a program Remove the laundry. Touch the flashing Start/Stop sensor button. Items left in the drum could discolor The door will lock ( will appear in the other items in the next wash or display to show this) and the wash become discolored themselves.
Spin cycle Ending the wash program Final spin speed in the wash program Use if you want to remove the laundry when it is dripping wet and without When a program is selected, the spinning. optimum spin speed for the wash program is always shown in the display.
Program guide Programs on the program selector The temperature marked with is pre-set. Temperature Item/Tip with garment care label symbols Normal Full load (17.6 lb/8 kg) Cotton, linen, and mixed fibre textiles made of 140°F/60°C Hot + both cotton and linen. ...
Warm 85°F/30°C Cold Cold MobileControl The Miele@mobile app is used to select the programs and operate the appliance. QuickIntenseWash Full load (11 lb/5 kg) For lightly or moderately soiled textiles which 140°F/60°C Hot + are also suitable for washing in the Cottons ...
Program guide Temperature Item/Tip with garment care label symbols Express Half load (7.7 lb/3.5 kg) Cotton textiles that have hardly been worn or Warm + 105°F/40°C are only very lightly soiled. 85°F/30°C Warm Selecting the Light level of soiling will reduce Cold Cold the washing time by 10 minutes.
Program guide Programs positioned on the More programs/ program selector Temperature Item/Tip with garment care label symbols Outdoor Small load (5.5 lb/2.5 kg) 105°F/40°C Performance outerwear (e.g., jackets and Warm + trousers) made from membrane fabric. Warm 85°F/30°C – Zip up or close any jackets with Velcro before Cold Cold washing.
Program guide Temperature Item/Tip with garment care label symbols Woolens Small load (4.4 lb/2 kg) 85°F/30°C Wool or wool-blend textiles. Warm Reduce the final spin speed for items which Cold Cold crease easily. Silks Very small load (2.2 lb/1 kg) ...
Program guide Temperature Item/Tip with garment care label symbols Separate rinse Full load (17.6 lb/8 kg) For rinsing hand-washed items. Reduce the final spin speed for items which crease easily. Baby Clothes Full load (13.2 lb/6 kg) Baby Clothes, baby towels, bath gowns, Hot + 140°F/60°C toweling items, bibs made from cotton.
Program guide Temperature Item/Tip with garment care label symbols Pillows 2 pillows (40 x 80 cm) or 1 pillow (80 x 80 cm) Synthetic-filled washable pillows Hot + 140°F/60°C – Remove air from the laundry before washing 120°F/50°C to prevent an excessive build-up of foam. To ...
– Optimum results can be achieved by using Miele machine cleaner. Alternatively, a universal powder detergent can be used. – Dispense the machine cleaner or universal detergent directly into the drum.
Extra options You can supplement the wash SoftSteam programs with extra options. In order to reduce creasing, the laundry undergoes a smoothing process at the Selecting extra options end of the program. Reducing the Extra options are selected or maximum load by 50% will give a better deselected using the sensor buttons in result.
Extra options Extra options can be selected Only liquid detergent may be added using the "Options" sensor to the chamber of the detergent dispenser drawer. button Powder detergent clogs up the Selecting extra options in the display chamber and water can escape from the detergent dispenser ...
Extra options The following extra options can be selected in addition to the programs Cottons – Minimum Iron Delicates SaniWash Handwash – – – – – – Dress Shirts QuickIntenseWash – – – – – – Express – – – –...
Changing the program sequence Canceling a program Interrupting a program Turn the program selector to the You can cancel a wash program at any position. time after it has started. Touch the Start/Stop sensor button. The washing machine switches off. ...
Changing the program sequence Child lock Adding or removing laundry The wash program cannot be Laundry can only be added or interrupted unintentionally. removed at the beginning of a wash program. Activating the child lock If the following message no longer ...
Miele-recommended detergents The Miele detergents have been developed by Miele especially for the Miele washing machine. You can order the Miele detergents from Miele's online store or you can purchase them from Miele's customer service, or your Miele dealer. Miele...
Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation. Universal Color Detergent for Bleach detergent detergent Woolens and delicates Normal – Wrinkle-free – Delicates –...
Press a washing machine, available from down the release button and at the Miele. same time pull the drawer right out of the machine. Do not use chemical solvents,...
Page 55
Cleaning and care Cleaning the compartment Removing and cleaning the insert for liquid detergents Compartment 1 has a siphon for better An insert for liquid detergents is located dispensing of the chlorine bleach. in the compartment of the detergent dispenser drawer.
Page 56
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. The siphon in the / compartment no longer works and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
To clean the system, you need a "TwinDosCare" cleaning cartridge. Touch the sensor button until the This is available in Miele's online store. following appears in the display: The washing machine has a cleaning ...
Cleaning and care Cleaning the filter in the inlet valve Cleaning the water inlet filter Using pliers, carefully loosen the The washing machine has two filters to ribbed plastic nut on the inlet valve protect the inlet valve. You should and unscrew.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Some of the messages in the display are more than one line long.
Frequently Asked Questions The following fault message appears in the display and the program has been canceled Message Possible cause and solution The water inlet is blocked or restricted. Water intake See Check whether the faucet is turned on properly. ...
Frequently Asked Questions A message appears in the display at the end of the program or when the appliance is switched on Message Possible cause and solution The pumps are dirty. Check filter + jets Clean the pumps as described in "Problem solving guide –Opening the door in the event of a blocked drain outlet and/or power cut".
The following appears in the display: Clean Machine Touch the OK sensor button to confirm. Run the program using the Miele Clean Machine clean machine or a universal powder detergent. The washing machine is cleaned which prevents bacteria and odor buildup.
Frequently Asked Questions A message about the TwinDos system has appeared in the display Message Possible cause and solution The detergent in the cartridge is running low. There Cartridge 1 almost are between 4 and 8 wash cycles remaining. empty. Only a few ...
In order to prevent bacteria and unpleasant odors building up in the machine, run the Clean machine program using Miele clean machine or universal powder detergent. The door and detergent dispenser drawer were closed after washing.
Frequently Asked Questions General problems with the washing machine Problem Possible cause and solution There are unusual There is no fault! sounds coming from Lapping sounds at the beginning and end of the the drain pump. drain process are normal. The fabric softener is The siphon tube is either positioned incorrectly or not completely...
Consequently, fruit, coffee, and tea stains results. cannot always be removed. Use the Miele 2-phase system. The deliberate addition of UltraPhase 2 during the wash process removes stains effectively. Use powder detergent containing a bleaching agent.
Frequently Asked Questions The drum door cannot be opened Problem Possible cause and solution The door cannot be The door is locked during a program. pulled open during a Touch the Start/Stop sensor button. program. Select in the display Cancel Program Add laundry using the ...
Turn off the washing machine. filters completely or take them right out. Place a suitable container under the flap, e.g., a Miele universal oven tray. Press the drain pump flap to open. The flap will spring open. Blocked drain outlet If the drain outlet is blocked, a larger ...
Page 69
Frequently Asked Questions Opening the door Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filters thoroughly. Remove any foreign objects (e.g., buttons, coins, etc.) and clean the interior.
Optional accessories In the event of a fault which you cannot Optional accessories are available remedy yourself, please contact your through your Miele dealer or Miele. Miele dealer or Miele Technical Service. Warranty Contact information for Miele For further information, please refer to Technical Service can be found at the your warranty booklet.
Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
Installation Front view a Drain hose f Detergent dispenser drawer b Hot-water inlet hose (pressure-proof g Door to 1,015 psi/7,000 kPa) h Flap for drain filters, drain pumps, c Cold-water inlet hose (pressure- and emergency release proof to 1,015 psi/7,000 kPa) i Flap for TwinDos cartridges d Electrical connection j Four height-adjustable feet e Control panel...
Installation Rear view a Drain hose f Hot-water inlet hose (pressure-proof to 1,015 psi/7,000 kPa) b Transport clips for inlet and drain g Safety caps for shipping struts hoses and power cord c Electrical connection h Transport clips for inlet and drain hoses and for storing shipping struts d Protruding lid for holding when when not in use...
(concrete or masonry), it must be secured in place using the MTS floor mounting kit (available from Miele). Remove the left and right covers. 1. Pull off the shipping strut covers and 2. then use a screwdriver to release the...
Page 75
Installation Using the wrench supplied, turn the Turn the right-hand shipping strut left-hand shipping strut 90°, then 90°, then withdraw the shipping strut. withdraw the shipping strut.
Installation If the holes are not covered, there is a risk of injury. To avoid the risk of injury the holes for the shipping struts must be covered after they have been removed. Secure the shipping struts to the back of the washing machine.
Installation Leveling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electric and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine.
Installation For closets at room height Additional installation requirements You can also insert a ventilation opening at the top of the closet. In All installations must be done in addition, you must also provide an accordance with local codes. opening on the bottom side of the door.
Installation Installation on a plinth Product Dimensions – WTS 510 (only available in white) Dimensions = 4.9 ft (1.50 m) drain hose with Washer-dryer stack connection to the top left on the rear – WTV 512 and WTV 502 washer-dryer stacking kit ...
Installation Electronic module and washing The water protection system machine housing The Miele water protection system – Sump: Any leaking water is collected protects all parts of the washing in a sump in the base of the machine. machine and its surroundings from A float switches off the water inlet water damage.
Installation Water intake Maintenance The washing machine can be Only use a genuine Miele hose that has connected to a portable water supply. A been tested to withstand pressure of at non-return valve is not needed unless least 1,015 psi/7,000 kPa should you required by building code.
If required, the hose can be extended to a length of up to 16.4 ft (5 m). Accessories are available from your Miele dealer or the Miele Technical Service. Drainage options: 1. Directly into a sink: Lay the hose...
Installation ELECTRICAL INSTRUCTIONS Electrical connection This installation should be performed by GROUNDING INSTRUCTIONS an experienced and qualified This appliance must be grounded. In technician, in accordance with local the event of a malfunction or codes and regulations. breakdown, grounding will reduce the risk of electric shock by The washing machine is supplied with a providing a path of least resistance...
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 1/16" (636 mm) Depth with door open 41 1/2" (1054 mm) Height for building under 32 5/16" (+5/16"/-1/16") (820 mm) Width for building under 23 5/8" (600 mm) Weight Approx.
Settings Selecting settings You can use the settings to alter the washing machine's electronics to suit Touch the sensor buttons until changing requirements. the setting you want appears in the display. The settings can be altered at any time.
This only appears if the PIN code has been activated previously. Make a note of the new PIN code. If you forget the code, the washing machine will need to be unlocked by Miele Technical Service.
Settings Brightness Display switch-off You can set the brightness of the The display and the sensor button display, the sensor buttons, and the lighting is switched off to save energy. dimmed sensor buttons. The Start/Stop sensor button flashes slowly. Options Options –...
Settings Memory Long p-wash Normal The washing machine will save the If you require a longer pre-wash, you last settings (temperature, spin speed, can extend the standard pre-wash and some of the extra options) time of 25 minutes. selected for a wash program after the Options program has started.
Temp. reduction edge of a sink or basin. At high altitudes water has a lower – Where the drainage pipes do not boiling point. Miele recommends comply with DIN 1986. activating the reduce temperature Suds cooling is switched off in the setting at altitudes of or above 6560 ft...
– The WiFi connection will be reset to submenu: the default setting. Set up Miele@home is no longer set up. A new This message only appears if the connection setup has to be carried out washing machine has not yet been in order to use the Miele@home setting connected to a WiFi network.
Miele@home setting is set up and activated. up and activated. Once the Miele@mobile app has been This function can be used for starting installed on your mobile device, you your washing machine automatically can check the status of your washing...
Settings Bleach You can activate the automatic addition of chlorine bleach at the end of the main wash. Chlorine bleach may only be used in some programs. See "5. Adding detergent – Using chlorine bleach" for more detailed information. Activating chlorine bleach extends the program duration by approximately 10 minutes.
Optional accessories Wool and delicates detergent Detergent – Liquid detergent for delicates UltraPhase 1 – Particularly suitable for woollen and – Universal liquid detergent silk textiles – For white and colored laundry – Cleans at temperatures as low as – No need to refill as the components 70°F (20°C), helps retain the shape of for the TwinDos system are supplied delicate items and protect colors...
Optional accessories WoolCare Additive – Liquid detergent for Woolens and Booster delicates – For removing stains – Includes a special wheat protein – For white and colored laundry conditioning formula – Available as capsules in – Helps prevent pilling convenient single dose amounts –...
Page 99
Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...