Page 1
Operating instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en-AU, NZ M.-Nr. 11 625 472...
Before using for the first time ................16 Miele@home ......................17 1. Removing the transit bars ................18 2. Setting up Miele@home .................. 18 3. Commissioning TwinDos ................. 19 4. Starting the calibration programme..............20 Washing environmentally and economically ..........21 1.
Page 3
Detergent ......................45 The correct detergent..................45 Detergent dispensing aids................... 45 Fabric softeners and liquid starch ............... 45 Miele detergents....................46 Replacing the TwinDos cartridge..............48 Cleaning and care ..................... 49 External casing and fascia panel................. 49 Cleaning the detergent dispenser drawer ............49 Hygiene info (Cleaning the drum) ................
Page 4
Screwing out and adjusting the feet............... 71 Installing under a continuous worktop ............72 Washer and dryer stack ................. 72 The Miele water protection system ..............73 Connection to the water supply ................73 Connecting the water inlet ................73 Drainage ......................
Page 5
Contents TwinDos maintenance .................. 86 Degree of soiling ..................86 Network ....................... 87 Remote control ..................... 87 SmartGrid (only functional in selected countries) ........87 RemoteUpdate ..................... 88 Switching off Wi-Fi ....................89 Copyright and licences for the communication module ........89 Detergents and care products .................
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
“Installation”, as well as in the “Warning and Safety instructions”. Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep these operating instructions in a safe place and pass them on to any future owner.
Page 8
The protective measures provided in the installation and in this Miele product must also be assured in their function and operation in isolated operation or in non-mains synchronous operation, or...
Page 9
Faulty components must only be replaced by genuine Miele spare parts. Miele can only guarantee the safety of the appliance when Miele replacement parts are used. The electrical socket must be easily accessible after installation so that the machine can be disconnected from the electricity supply if necessary.
Page 10
(e.g. on a ship). Do not make any alterations to the machine, unless authorised to do so by Miele. In areas which may be subject to infestation by cockroaches or other vermin, pay particular attention to keeping the machine and its surroundings in a clean condition at all times.
Page 11
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Page 12
Miele recommends using Miele descaler for washing machines which is available to order online at shop.miele.com (depending on country) or from Miele. Strictly observe the instructions on the packaging.
Page 13
A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Control panel e Indicator lights The control panel consists of a time Lights up if there are faults with display and various sensor controls. the water inlet and drainage.
Operating the washing machine g Time display i Start/Add laundry sensor After the programme has started, the The programme can be started programme duration will appear in as soon as the sensor is the display in hours and minutes. flashing on and off. Touching When Delay start is being used, the the Start/Add laundry sensor programme duration will appear after...
Before using for the first time Take the two cartridges and the Damage resulting from incorrect elbow piece out of the drum. installation and connection. Installing and connecting the washing machine incorrectly will cause serious damage to property. See “Installation”.
- a Wi-Fi network failures. Therefore, a constant availability of featured functions cannot - the Miele@mobile App be guaranteed. - a Miele user account. The user account can be created via the Miele@home availability Miele@mobile App. The ability to use the Miele App...
There are 2 ways of connecting: When you have successfully connected, will appear in the time display. 1. Via the Miele App (default) Useful tip: If the connection has not 2. Via WPS been set up when the timeout has...
Before using for the first time 3. Commissioning TwinDos The TwinDos system can only be operated with the Miele UltraPhase 1 and UltraPhase 2 detergent cartridges. It is not possible to use any other detergent in the TwinDos system. The dispensing quantities for UltraPhase 1 and UltraPhase 2 are...
Before using for the first time Opening the door at the end of the 4. Starting the calibration programme programme The door remains locked during the For optimum water and energy Anti-crease phase. The control panel consumption and excellent wash lights up for 10 minutes after the results, it is important to calibrate the programme ends.
Cottons bacteria and odours to build up in the programme is more efficient in terms washing machine. Miele therefore of energy and water consumption. recommends cleaning the washing - Use the Express 20 programme for machine once every month.
Spillages should be carefully dabbed off using a soft, colourfast cloth. Do not rub. Useful tip: Please refer to the Miele website or Miele@mobile App for more information on stain removal.
appears in the time display. Once the programme has started, the washing machine can be operated with the Miele App. You must touch the Start/Add laundry sensor to enable operation via the Miele App. Touching the sensor also locks the door of the washing machine.
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it Make sure that no items are caught open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
4. Selecting programme settings Selecting the temperature and Selecting Extras spin speed The selection of Extras available for the wash programme lights up dimly. The wash programme's pre-set temperature and spin speed light up brightly. The choice of temperatures and spin speeds selectable for the wash programme light up dimly.
UltraPhase 1 and Deactivating TwinDos dispensing UltraPhase 2 single use cartridges are Touch the brightly lit TwinDos white available to order from Miele or via the items or TwinDos coloured items internet at shop.miele.com (see the end sensor. of this booklet for details).
5. Adding detergent Degree of soiling of the laundry There are 3 different degrees of soiling. The quantity of detergent dispensed via TwinDos and the quantity of water required for rinsing are preset for the normal degree of soiling. - Light No visible soiling or stains - Normal Visibly soiled and/or just a few light...
5. Adding detergent Adding fabric softener Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Ensure that TwinDos dispensing is deactivated.
Page 29
5. Adding detergent Tips on dosing Using liquid detergent with a pre- wash Adjust the detergent dosage to the level of soiling of the laundry and the size of Liquid detergent cannot be used for the the load. Reduce the amount of main wash if the pre-wash has been detergent with smaller loads (e.g.
You can order the capsules online at shop.miele.com (depending on country) Open the lid of the / or from Miele (see the end of this compartment. booklet for contact details). Capsules pose a health risk.
Page 31
5. Adding detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. No additional fabric softener may be added to the compartment when using a capsule. ...
6. Starting the programme Starting a programme Adding or removing laundry during a programme sequence (AddLoad) Laundry can be added or removed at any time, provided that the symbol is not illuminated in the control panel. Touch the Start/Add laundry sensor. ...
7. At the end of the programme Opening the door and Items left in the drum could discolour removing the laundry other items in the next wash or become discoloured themselves. The door remains locked during the Check that all items have been Anti-crease phase.
Spinning Final spin speed in wash Deselecting final spin (Rinse programmes hold) Touch the sensor (Rinse hold). When a programme is selected, the sensor for the optimum spin speed for The laundry is not spun after the final that programme will be brightly lit up in rinse and remains in the rinse water.
Delay start/SmartStart Starting Delay start Delay start Touch the flashing Start/Add laundry With Delay start you can delay the sensor. start of a programme. The Delay start process starts and This function is active when the counts down in the time display. SmartGrid programmable function is switched off.
Page 36
Delay start/SmartStart Setting the timeframe SmartStart (only functional in selected countries) If the SmartGrid programmable function is activated, the function of The SmartStart function lets you the sensor changes. The time define a time period during which your display no longer shows the Delay washing machine will start start period, and instead shows the automatically based on an external...
Programme chart ECO 40-60 maximal 8.0 kg Artikel For normally soiled cotton garments Tipp A laundry load consisting of mixed cottons that are intended for washing at 40°C or 60°C can be washed in the same wash cycle. Information for customers: You cannot normally select any temperatures or Extras for the ECO 40-60 wash programme.
Page 38
Notes Reduce the spin speed for fabrics that crease easily. MobileStart The Miele App is used for selecting programmes and operating the machine. Express 20 Cold to 40°C Max. load 3.5 kg Items Cotton garments that have hardly been worn or are only very lightly soiled.
Page 39
Programme chart Dark garments/ Cold to 60°C Max. load 3.0 kg Denim Items Black and dark garments made from cotton, mixed fibres and denim. Notes - Wash inside out. - Denim often contains excess dye and may run during the first few washes.
Extras You can use the Extras sensor to The following Extras can be augment the wash programmes. selected in addition to the programme Selecting Extras Extras are selected and deselected using the relevant sensors on the control panel. ECO 40-60 –...
Garment care label symbols Washing Drying The figure quoted in the bucket is the Normal temperature maximum temperature at which the Low temperature garment can be washed. Do not tumble dry Normal agitation Reduced agitation Ironing ...
Page 43
Programme sequence Special features in the = low water level programme sequence = medium water level Anti-crease: = high water level At the end of the programme the drum = intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
Changing the programme sequence Changing the programme Cancelling a programme (safety lock) You can cancel a programme at any time after it has started. It is not possible to change the programme, the temperature, the spin Turn the programme selector to the speed or the selected Extras after the position.
Detergent The correct detergent Colour run and dye removers/ dyes All detergents produced for automatic front loading washing machines are Damage due to colour run/dye suitable. Follow the manufacturer's removers. instructions and dosage Colour run and dye removers can recommendations on the packaging.
Detergent Miele detergents Miele detergents have been specially designed for everyday use in Miele washing machines. See “Detergents and care products” for more information about these detergents. Miele Miele capsules UltraPhase 1 and 2 ...
Page 47
Detergent The recommendations apply to the temperature ranges given in the Programme chart. Universal Colour Delicates and Special woollens detergent ECO 40-60 – – Cottons – – Minimum iron – – – Delicates – –...
Replacing the TwinDos cartridge 1. An empty cartridge for compartment Risk of damage from film seal 1 is indicated by the TwinDos white If the film seal is not removed items sensor flashing at the start of completely, leaks can occur in the the programme.
Cleaning and care External casing and fascia Cleaning the detergent panel dispenser drawer Washing at low temperatures and the Risk of electric shock! use of liquid detergent can lead to a Mains voltage is present when the build-up of bacteria in the detergent washing machine is switched off.
Page 50
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
Cleaning and care Clean the filter and the seal. Hygiene info (Cleaning the drum) Reassemble the filter and seal in the reverse order and reconnect the Washing at low temperatures and/or hose. using liquid detergent can cause bacteria and unpleasant odours to build Cleaning the filter in the inlet valve up in the washing machine.
Touch the sensor. “TwinDosCare” cleaning cartridge. will light up in the time display. These are available from shop.miele.com. Confirm with the Start/Add laundry sensor. The washing machine has a cleaning will flash in the time display.
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Wait at least 2 minutes before reconnecting the washing machine to the electricity supply. Then switch the washing machine on again. Restart the programme. If the fault message appears again, contact Miele.
App. MobileStart programme is selected. lights up in the time Miele@home is not set up. display when the Network the washing machine; see “Before using MobileStart for the first time – 2. Setting up Miele@home”. programme is selected.
Check whether the washing machine is aligned correctly (see "Installation – Levelling the machine"). Check whether the maximum drain height of 1 m has been exceeded. If the fault message appears again, contact Miele. The washing machine can still be used, but without the Pre-ironing Extra.
TwinDos white items or TwinDos coloured items sensor was activated. Start another programme with TwinDos dispensing. If detergent is still not dispensed, call Miele. A new detergent The washing machine was switched off when the cartridge has been detergent cartridge was replaced.
In order to prevent bacteria and unpleasant odours building up in the washing machine, run the Cottons 90°C programme using Miele IntenseClean machine cleaner or a universal powder detergent. The detergent dispenser drawer was left closed after washing.
Page 59
Problem solving guide General problems with the washing machine Problem Possible cause and remedy Large amounts of The water pressure is too low. detergent residue Clean the water inlet filter. remain in the detergent Please note that the water pressure must be at dispenser drawer.
They do not remove fruit, coffee and tea result. stains. Use the Miele 2 Phase System. The targeted addition of UltraPhase 2 during the wash process removes stains effectively. Use a general purpose powder detergent containing a bleaching agent.
Wait until the temperature in the drum has in the time display. decreased and the bars have stopped flashing in the display. and alternately The door lock has jammed. appear in the time Call Miele. display.
Problem solving guide Procedure for draining the machine Opening the door in the event of a blocked drain outlet and/ When removing the drain filter, do or power cut not remove it completely. Switch off the washing machine. Place a suitable container under the access panel, e.g.
Page 63
Problem solving guide Opening the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry. Remove the drain filter completely. ...
Optional spare parts and accessories cannot remedy yourself, please contact for this washing machine are available Miele. from Miele. You can book a Miele customer Warranty service call-out online at The manufacturer's warranty for this www.miele.com.au/service or appliance is 2 years.
*INSTALLATION* Installation Front view a Inlet hose (tested to withstand e Detergent dispenser drawer pressures up to 7000 kPa) f Door b Electrical connection g Access to filter, pump and c Flexible drain hose (with detachable emergency release swivel elbow) h Access panel for TwinDos cartridges d Control panel i Four height-adjustable feet...
*INSTALLATION* Installation Rear view a Drain hose e Inlet hose (tested to withstand pressures up to 7000 kPa) b Transport clips for inlet and drain f Safety caps for transit bars hoses and mains connection cable c Electrical connection g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when when not in use...
*INSTALLATION* Installation Installation surface Transporting the washing machine to its installation site A concrete floor is the most suitable installation surface. It is far less prone Danger of injury due to to vibration during the spin cycle than unsecured lid. wooden floorboards or a carpeted Make sure the fixings at the back of surface.
*INSTALLATION* Installation Removing the right transit bar Removing the transit bars Removing the left transit bar Push the flap outwards and turn the transit bar 90° using the enclosed Push the flap outwards and turn the spanner. transit bar 90° using the enclosed spanner.
Page 69
*INSTALLATION* Installation Covering the holes Securing the transit bars Risk of injury from sharp edges! There is a risk of injury from reaching into holes that are not covered. To avoid the risk of injury, the holes for the transit bars must be covered after the transit bars have been removed.
*INSTALLATION* Installation Fitting the transit bars Opening the flaps Push against the catch with a pointed object, e.g. a narrow screwdriver. The flap will open. Fitting the transit bars Install the transit bars in reverse order to their removal. Useful tip: If you lift the drum slightly, the transit bars can be pushed in more easily.
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine.
*INSTALLATION* Installation Installing under a continuous Washer and dryer stack worktop A Miele tumble dryer can be stacked with the washing machine. The Risk of electric shock due to appropriate “WTV” stacking kit* to exposed cables. match your tumble dryer is required.
Drain hose The Miele water protection system The drain hose is protected by a ventilation system which prevents the The Miele water protection system washing machine from being emptied protects all parts of the washing completely. machine and surrounds from water damage.
Page 74
*INSTALLATION* Installation Maintenance Only use a genuine Miele hose should you ever need a replacement. These are tested to withstand pressures up to 7000 kPa. A filter is located in the open end of the inlet hose and another in the intake point to protect the inlet valve.
If required, the hose can be extended to a length of up to 5 m. The necessary parts can be ordered from Miele (depending on country). For a delivery head of more than 1 m (up to a max. of 1.8 m), a replacement drain pump will need to be fitted.
*INSTALLATION* Installation Direct connection to a sink drain outlet a Adapter b Washbasin nut c Hose clip d End of the hose Fit the adapter to the sink drain outlet using the nut . Attach the end of the hose to the adapter .
The protective measures provided in multi-socket plug adapter. the domestic installation and in this Miele product must also be assured in All electrical work must be carried out their function and operation in isolated by a suitably qualified and competent...
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 85 kg Capacity 8.0 kg dry laundry Supply voltage See data plate Rated load See data plate Fuse rating See data plate Consumption data...
Programmable functions Programmable functions The programmable functions are used to alter the machine's electronics to Keypad tone suit changing requirements. PIN Code Programmable functions can be Control panel switch-off status altered at any time. Memory Opening the programming ...
Programmable functions Confirm the chosen selection with Editing and saving the the Start/Add laundry sensor. programmable function The number of the programmable You can either switch a programmable function, e.g. , will light up again. function on or off or select different options.
Programmable functions PIN Code Control panel standby status The PIN code prevents the washing machine being used without your To save energy the time display and knowledge. sensors will go out after 10 minutes, and only the Start/Add laundry sensor When the code has been activated, you will flash slowly.
Reduce temperature Longer pre-wash Cottons At high altitudes water has a lower If you require a longer pre-wash you boiling point. Miele recommends can extend the pre-wash time. activating the Reduce temperature setting at altitudes of or above 2000 m Options to prevent water from boiling.
Programmable functions Maximum rinse level Anti-crease The water level in the rinse can be The Anti-crease function helps prevent permanently set to the highest value. creasing if laundry is not going to be removed immediately after the end of This function is important for allergy the programme.
Programmable functions Backlight brightness UltraPhase 1 dispensing dimmed quantity The brightness of the dimmed sensors The dispensing quantity is preset to in the control panel can be selected at 46 ml at the factory (water hardness seven different levels. level I). It will change as soon as a different You can adjust the dispensing quantity setting is chosen.
Programmable functions TwinDos maintenance Degree of soiling The washing machine has a cleaning The quantity of detergent dispensed programme for the TwinDos system. via TwinDos and the quantity of water Running the cleaning programme will required for rinsing depend on factors clean the hoses inside the washing including the degree of soiling.
- Miele@home”). SmartGrid (only functional Remote control in selected countries) You can use the Miele App to check You can set your washing machine to the status of your washing machine start automatically based on an from anywhere and start it remotely.
Programmable functions RemoteUpdate - Some software updates can only be carried out by a Miele service The RemoteUpdate function is used for technician. updating the software in your washing machine. If an update is available for Switching on/Switching off...
The next time you switch on the protected by copyright. The copyright appliance, you will be prompted to start powers of Miele and third parties must the update again. be respected. Switching off Wi-Fi In addition, the communication module ...
Miele washing machines. - Excellent stain removal even at low These and many other products can be temperatures ordered from shop.miele.com, Miele directly or a Miele Experience Centre. - Also available as a powder detergent Detergent WoolCare delicates detergent (liquid detergent)
- Visibly renews fabric with just one capsules. wash Caps Sport - Special Miele formula with Novozymes technology - For synthetic fabrics - Removes pilling and renews colour - Neutralises odours thanks to built-in intensity and brightness...
Detergents and care products Fabric care Machine care products These fabric care products are available TwinDosCare as convenient single-use capsules. - Cleaning agent for the TwinDos Caps Fabric Softener dispensing system - Fabric softener for freshly scented - Use before a longer downtime (at laundry least 2 months) - Pure and thorough cleanliness with a...
Page 95
183 Featherston Street Miele Experience Centre South Melbourne: Wellington 6011 206-210 Coventry Street South Melbourne, VIC 3205 0800 464 353 (0800 4 MIELE) Miele Experience Centre and Office Sydney: www.miele.co.nz 3 Skyline Place Frenchs Forest, NSW 2086 Miele Experience Centre and Office Brisbane:...