Related Manuals for Miele WWG360 WCS PWash
Summary of Contents for Miele WWG360 WCS PWash
- Page 1 Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-GB, IE M.-Nr. 12 029 640...
-
Page 2: Table Of Contents
Before using for the first time..................17 Miele@home ........................18 1. Set the language ......................19 2. Setting up Miele@home................... 19 3. Remove the transit bars.................... 20 4. Starting the calibration programme ................ 20 Washing environmentally and economically ............21 Hygiene in the washing machine ................. - Page 3 Water softeners ......................52 Dispensing aids ......................52 Fabric conditioner and liquid starch ................52 Recommended Miele detergents ................54 Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 ..55 Cleaning and care ......................56 Cleaning the external casing and the control panel ..........56 Cleaning the detergent dispenser drawer ..............
- Page 4 Contents Problem solving guide....................59 The programme does not start..................59 Fault message after a programme has been interrupted.......... 60 Fault message at the end of a programme ..............61 General problems with the washing machine............63 An unsatisfactory wash result ..................65 The door will not open ....................
- Page 5 Water plus level ......................90 Maximum rinse level ...................... 91 Suds cooling........................91 Low water pressure......................91 Anti-crease ........................91 Miele@home ........................92 Remote control ....................... 93 SmartGrid........................93 RemoteUpdate ....................... 94 Copyrights and licences for the communication module......... 95 Detergents and care products ...................
-
Page 6: Caring For The Environment
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged... -
Page 7: Warning And Safety Instructions
It must be used only as a domestic appliance to wash items which are specified by the manufacturer as being washable on the wash care label. Miele cannot be held liable for damage resulting from in- correct or improper use or operation. - Page 8 Warning and Safety instructions Safety with children Children under 8 years of age must be kept away from the washing machine unless they are constantly supervised. Children 8 years and older may only use the washing machine un- supervised if they have been shown how to use it safely and recog- nise and understand the consequences of incorrect operation.
- Page 9 Faulty components must only be replaced by genuine Miele ori- ginal spare parts. Only when these parts are fitted can Miele guaran- tee the safety standards of the machine. The electrical socket must be easily accessible after installation so ...
- Page 10 If the electrical connection cable is faulty it must only be replaced by a Miele authorised service technician to protect the user from danger. The machine must be isolated from the electricity supply when ...
- Page 11 Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the elec- tronic control unit may be impaired at temperatures below freezing point.
- Page 12 If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaling agent which is available to order online at www.miele.co.uk or from Miele. Strictly observe the instructions on the packaging.
- Page 13 A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
-
Page 14: Operating The Washing Machine
Operating the washing machine Control panel a Control field d Display The control field consists of a display The following values are shown on and various sensor controls. The in- the display and/or selected from it: dividual sensors are explained in the 1. - Page 15 Operating the washing machine g sensor j Optical interface This sensor is used for activating Cap This is used by the Service depart- dispensing. ment as a transmission point. h Start/Add laundry sensor control k Programme selector for selecting programmes and for The programme can be started ...
-
Page 16: Display
Operating the washing machine Setting numerical values Display The standard display shows the follow- Start in ing from left to right: The numerical value is highlighted in 2:24 40° 1400 white. Touching the sensor control ... -
Page 17: Before Using For The First Time
Before using for the first time Remove the drain hose elbow Damage resulting from incorrect from the drum installation and connection. Installing and connecting the wash- An elbow piece for the drain hose is ing machine incorrectly will cause stored in the drum. -
Page 18: Miele@Home
- a WiFi network Therefore, the availability of featured functions cannot be guaranteed. - the Miele@mobile App - a Miele user account. The user ac- Miele@home availability count can be created via the The ability to use the Miele app de- Miele@mobile App. -
Page 19: Set The Language
Confirm with OK. The following message appears in the display: Set up now To set up Miele@home now: touch the OK sensor control. To postpone setup until later: touch Turn the programme selector to the the sensor control until the follow- Cottons programme. -
Page 20: Remove The Transit Bars
Before using for the first time The following message appears in the 3. Remove the transit bars display: Damage resulting from failure to Open and run “Cottons 90°C” without remove the transit bars. laundry. Failure to remove the transit bars can ... -
Page 21: Washing Environmentally And Economically
This will keep the energy and water and odours to build up in the washing consumption to a minimum in relation machine. Miele therefore recommends to the size of the load. cleaning the washing machine once every month. -
Page 22: Prepare The Laundry
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based cleaning agents Cleaning agents containing benzine, stain remover, etc., can damage... -
Page 23: Select A Programme
2. Select a programme 2. Selecting additional programmes by Switching on the washing ma- setting the programme selector to chine “Further programmes/” and using Turn the programme selector to a pro- the display: gramme. Programme selection There are three possible ways to select a programme: 1. - Page 24 2. Select a programme 3. Selecting programmes via the Mo- bileStart programme selector posi- tion and the Miele app Tip: In order to use MobileStart , the washing machine must be logged on to the WiFi network and Remote control must be switched on.
-
Page 25: Load The Washing Machine
3. Load the washing machine Open the door Close the door Take hold of the door and pull it open. Make sure that no items are caught between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry. -
Page 26: Select Programme Settings
4. Select programme settings PowerWash display with the and sensor controls Quick econom- ical If the PowerWash indicator lights up when you select a programme, you can Cottons choose between three programme se- Cottons – quences. The wash result remains the same. -
Page 27: Selecting A Temperature/Spin Speed
4. Select programme settings Extras sensor control Selecting a temperature/spin speed You can select additional extras using the Extras sensor control. You can alter the preset temperature/ Touch the Extras sensor control. spin speed of a wash programme if this option is permitted for that pro- The following appears in the display: gramme. -
Page 28: Delay Start/Smartstart
4. Select programme settings Cancelling delay start Delay start/SmartStart The selected delay start period can be Delay start cancelled before the programme starts. With the delay start function, you can Touch the sensor control. delay the start of the programme. The selected delay start period will ap- This function is active when the setting pear in the display. - Page 29 4. Select programme settings SmartStart Setting the time period The SmartStart function lets you If you have activated the SmartGrid define a period of time during which function in Settings, SmartStart in your washing machine will start auto- stead of will appear in the dis- Start in matically.
-
Page 30: Add Detergent
5. Add detergent There are several options for adding de- Adding fabric conditioner tergent. Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging. - Page 31 5. Add detergent Tips on dosing Using liquid detergent with a pre-wash Adjust the detergent dosage to the level Liquid detergent cannot be used for the of soiling of the laundry and the size of main wash if the pre-wash has been se- the load.
-
Page 32: Capdosing
Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the Open the lid of the / compart- end of this booklet for contact details). - Page 33 5. Add detergent Deactivating or changing Cap- Dosing CapDosing can only be deactivated or changed prior to the programme start. Touch the sensor control. Select (deactivate) or a differ- No Cap ent type of capsule (change). Close the lid and press it firmly shut. ...
-
Page 34: Starting The Programme
6. Starting the programme Adding laundry during a pro- gramme sequence (AddLoad) Laundry can be added or removed at any time, provided that the symbol is not illuminated in the display. Touch the flashing Start/Add laundry Touch the Start/Add laundry sensor sensor control. -
Page 35: End Of Programme
7. End of programme Opening the door and removing the laundry The door remains locked during the anti- crease phase. The display will change to show: Finish/Anti-crease Press Start button Unlock the door either by touching the Start/Add laundry sensor control or by turning the programme selector to the position. -
Page 36: Spinning
Spinning Final spin speed in the pro- Programme gramme Cottons 1400 When a programme is selected, the op- Minimum iron 1200 timum spin speed for this wash pro- Delicates gramme is shown in the display. Woollens 1200 A faster spin speed can be selected for Silks ... - Page 37 Spinning Omitting the final spin (Rinse Interim spin hold) There is a spin cycle after the main wash and between the rinses. A reduction in Set the spin speed to (Rinse the final spin speed will also reduce the hold).
-
Page 38: Programme Chart
Programme chart Programmes on the programme selector Cottons 90 °C to cold Max. load 9.0 kg Items Cotton, linen or mixed fibre fabric, e.g. table linen, underwear, T- shirts, etc. Where particularly high levels of hygiene are required, please select a temperature of 60 °C or higher. Note for test institutes: Cottons 20 °C: programme for lightly soiled cotton garments Test programme for compliance with EU legislation regarding ecodesign... - Page 39 - Wash silk shirts and blouses in the Silks programme. - If the preset Pre-ironing Extra is switched off, the maximum load capacity is increased to 2.0 kg. MobileStart The Miele app is used for selecting programmes and operating the appliance. QuickPowerWash 60 °C – 40 °C Max. load 4.0 kg...
- Page 40 Programme chart ECO 40-60 Max. load 9.0 kg Items For normally soiled cotton garments A laundry load consisting of mixed cottons that are intended for washing at 40 °C or 60 °C can be washed in the same wash cycle. This programme is the most efficient in terms of energy and water consumption for washing cottons.
- Page 41 Programme chart Programmes accessed via Further programmes/ on the pro- gramme selector Outerwear Cold to 40 °C Max. load 2.5 kg Items Performance outerwear (e.g. jackets and trousers) made from mem- brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®, etc. - Zip up or close any jackets with Velcro before washing. - Do not use fabric conditioner.
- Page 42 Programme chart Separate rinse/Starch Max. load 8.0 kg Items - Rinsing hand-washed items - Table cloths, serviettes and workwear requiring starching - Reduce the spin speed for fabric that creases easily. - Laundry that is to be starched should be washed but not treated with fabric conditioner.
- Page 43 Cleaning the washing machine will significantly reduce bacteria, mould and biofilm, as well as prevent the build-up of unpleasant odours. - Optimum results can be achieved by using Miele’s IntenseClean washing machine cleaner. Alternatively, a universal powder deter- gent can be used.
-
Page 44: Garment Care Label Symbols
Garment care label symbols Washing Drying The figure quoted in the bucket is the Normal temperature maximum temperature at which the Low temperature garment can be washed. Do not tumble dry Normal agitation Reduced agitation Ironing Much reduced agitation ... -
Page 45: Extra Options
Extra options You can use the extra options buttons to SingleWash augment the wash programmes. For efficiently washing a very small load (< 1 kg) in a normal wash programme. Selecting Extras The wash duration is reduced. Extra options are selected or deselected Please note the following advice: using the sensors in the control field. -
Page 46: Extra Options Can Be Selected Using The Extras Sensor Control
Extra options Soak Extra options can be selected using the Extras sensor control For heavily soiled and stained items with protein stains. Selecting extra options in the display A duration of between 30 minutes and Touch the Extras sensor control. 6 hours in 30-minute increments can be selected for the soak process. -
Page 47: The Following Extras Can Be Selected In Addition To The Programmes
Extra options The following extras can be selected in addition to the pro- grammes Cottons Minimum iron Delicates – ... -
Page 48: Programme Sequence
Programme sequence Main wash Rinse Spin Water Wash Water Rinse level rhythm level cycles 1,2,3 Cottons Minimum iron Delicates Woollens Silks ... - Page 49 Programme sequence Special features in the pro- = low water level gramme sequence = medium water level Anti-crease: = high water level At the end of the programme, the drum continues to turn at intervals for up to ...
- Page 50 PowerWash PowerWash is activated automatically PowerWash is a washing technique de- in the programmes listed above. veloped by Miele. It is activated in the following programmes: PowerWash is deactivated if: - Cottons (with small and medium load - The selected final spin speed is less sizes) than 600 rpm...
-
Page 51: Changing The Programme Sequence
Changing the programme sequence Changing a programme (safety Cancelling a programme lock) You can cancel a wash programme at any time after it has started. A programme, temperature, spin speed or selected options cannot be changed Turn the programme selector to the once the machine has been successfully position. -
Page 52: Detergent
Detergent The correct detergent Dispensing aids All detergents produced for automatic Use dispensing aids, (e.g. balls) if these washing machines are suitable. Follow are supplied with the detergent, particu- the manufacturer's instructions and larly when using liquid detergent. dosage recommendations on the pack- Refill packs of detergent aging. - Page 53 Detergent Using fabric conditioner or Colour run and dye removers/ starch separately dyes Prepare the starch in accordance with Damage due to colour run/dye the manufacturer's instructions on the removers. packaging. Colour run and dye removers can Tip: When adding fabric conditioner, ac- cause corrosion in the washing ma- tivate the Water + extra option.
-
Page 54: Recommended Miele Detergents
Detergent Recommended Miele detergents Miele detergents have been specially designed for day-to-day use in Miele washing machines. See “Detergents and care products” for more information about these detergents. Miele detergents Miele capsules UltraWhite UltraColor Cottons – ... -
Page 55: Recommended Detergents In Accordance With Directive (Eu) Nr. 1015/2010
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart. Universal Coloureds Delicates and Specialist woollens detergent Cottons – – Minimum iron – – – Delicates –... -
Page 56: Cleaning And Care
Cleaning and care Cleaning the external casing Cleaning the detergent dis- and the control panel penser drawer Washing at low temperatures and the Risk of electric shock! use of liquid detergent can lead to a Mains voltage is present when the build-up of mould and germs in the de- washing machine is switched off tergent drawer. - Page 57 Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thor- oughly after using liquid starch a few times.
-
Page 58: Hygiene Info(Cleaning The Drum)
Cleaning and care Reassemble in reverse order. Hygiene info (Cleaning the drum) Cleaning the filter in the inlet valve Washing at low temperatures and/or us- Using pliers, carefully loosen the ing liquid detergents can cause bacteria ribbed plastic nut on the inlet valve and odours to build up in the washing and unscrew it. -
Page 59: Problem Solving Guide
You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ser- vice. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it. -
Page 60: Fault Message After A Programme Has Been Interrupted
Waterproof system. Close the stopcock. Turn off Ser- vice Call the Miele Customer Service Department. There is a fault. Service Fault F Disconnect the washing machine from the electri- city supply. Switch off at the wall and withdraw the plug from the socket, or disconnect the fuse. -
Page 61: Fault Message At The End Of A Programme
(see “Installation – Levelling the ma- chine”). Check whether the maximum drain height of 1 m has been exceeded. If the fault message appears again, contact the Miele Customer Service Department. The washing machine can still be used, but without the Pre-ironing extra option. - Page 62 Remove the fluff with your finger. Do not use any sharp or pointed tools to do this. Restart the programme after cleaning. If the fault message appears again, contact the Miele Customer Service Department. The washing machine can still be used but with reduced functionality.
-
Page 63: General Problems With The Washing Machine
60 °C has not been run for a long time. Run the Clean machine programme using Miele machine cleaner or a universal powder detergent. This will clean the washing machine and prevent a build-up of bacteria and odours. - Page 64 Problem solving guide General problems with the washing machine Problem Cause and remedy Large amounts of deter- The water pressure is too low. gent residue remain in Clean the water inlet filter. the detergent dispenser It may be useful to select the Water + extra option. drawer.
-
Page 65: An Unsatisfactory Wash Result
Use more detergent. Before washing the next load, run the Clean ma- chine using Miele machine cleaner or a powder de- tergent. White residues which The detergent contained compounds (zeolites) to aid look like powder deter- water softening which are not soluble in water. -
Page 66: The Door Will Not Open
Wait until the temperature in the drum has de- creased and the message has gone out in the dis- play. The following appears in The door lock has jammed. the display: Call the Miele Customer Service Department. Service Door release fault F35... -
Page 67: Opening The Door In The Event Of A Blocked Drain Outlet And/Or Power Cut
Problem solving guide Draining the washing machine Opening the door in the event of a blocked drain outlet and/or Remove the drain filter, though not power cut completely. Switch off the washing machine. Place a suitable container under the access panel, e.g. - Page 68 Problem solving guide Risk of water damage Make sure the drain filters are se- curely tightened. Otherwise there is a risk of water leakage during use. Replace the drain filters correctly and tighten them securely. Close the access panel for the drain pump.
-
Page 69: Service
In the event of any faults which you can- Please note that telephone calls may not remedy yourself, please contact be monitored and recorded for training your Miele dealer or the Miele Cus- purposes. tomer Service Department. You can book a Miele Customer Ser-... -
Page 70: Installation
*INSTALLATION* Installation Front view a Water inlet hose (pressure tested to e Detergent dispenser drawer 7000 kPa) f Door b Mains connection cable g Access to filters, pumps and emer- c Flexible drain hose (with detachable gency release swivel elbow) h Four height-adjustable feet d Control panel... -
Page 71: Rear View
*INSTALLATION* Installation Rear view a Drain hose e Water inlet hose (pressure tested to 7000 kPa) b Transport clips for inlet and drain f Safety caps for transit bars hoses and mains connection cable c Mains connection cable g Transport clips for inlet and drain hoses and for storing transit bars d Protruding lid for holding when mov- when not in use... -
Page 72: Installation Surface
(concrete or brick), in order to ensure it cannot fall or slip. Secure the washing machine using a clamp/fastening bracket (MTS floor mounting kit – available from your Miele dealer or Miele spare parts de- partment). -
Page 73: Removing The Transit Bars
*INSTALLATION* Installation Removing the right-hand transit bar Removing the transit bars Removing the left-hand transit bar Push the cover out and turn the left- hand transit bar 90° using the span- Push the cover out and turn the left- ner supplied. - Page 74 *INSTALLATION* Installation Covering holes Risk of damage from incorrect transport. Risk of injury from sharp edges. The washing machine may become There is a risk of injury from reaching damaged if moved without the transit into holes that are not covered. bars in place.
-
Page 75: Fitting The Transit Bars
*INSTALLATION* Installation Fitting the transit bars Opening the covers Press against the retainer with a sharp object (a narrow screwdriver, for example). The cover opens. Fitting the transit bars To fit the bars, follow the instructions for removing them in reverse order. Tip: The bars will slide in more easily if you lift the drum slightly. -
Page 76: Levelling The Machine
*INSTALLATION* Installation Levelling the machine The washing machine must stand per- fectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase elec- tricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine. -
Page 77: Installing Under A Continuous Worktop
Washer-dryer stack The washing machine can be combined Risk of electric shock due to ex- with a Miele tumble dryer in a washer- posed cables dryer stack. The appropriate “WTV” There is a risk of coming into contact stacking kit* to match your dryer is re- with live parts while the lid is re- quired. -
Page 78: The Water Protection System
Installation Drain hose The water protection system The drain hose is protected by a ventila- The Miele water protection system pro- tion system which prevents the washing tects all parts of the washing machine machine from being emptied com- from water damage. -
Page 79: Connection To The Water Supply
*INSTALLATION* Installation Maintenance Connection to the water supply Only use a genuine Miele hose that has Health risk and risk of damage been pressure tested to withstand at due to contaminated incoming water. least 7,000 kPa should you ever need a The quality of the incoming water replacement. -
Page 80: Water Drainage
If required, the hose can be extended to a length of up to 5 m. Accessories are available from your Miele dealer or from the Miele Customer Service Depart- ment. For drain heights of more than 1 m (up to a maximum delivery head of 1.8 m), a... -
Page 81: Direct Connection To A Sink Drain Outlet
*INSTALLATION* Installation Direct connection to a sink drain out- a Adapter b Spigot nut c Hose clip d End of the hose Fit adapter to the sink drain outlet using nut . Attach the end of hose to adapter . -
Page 82: Electrical Connection
Miele product must also be maintained in isolated operation or in operation that Risk of fire from overheating. -
Page 83: Consumption Data
Consumption data... -
Page 84: Technical Data
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 90 kg Capacity 9.0 kg dry laundry Supply voltage See data plate Rated load See data plate Fuse rating See data plate Consumption data... -
Page 85: Eu Conformity Declaration
UK Conformity declaration Miele hereby declares that this washing machine complies with UK Radio Equip- ment Regulations 2017, as amended. The complete text of the UK declaration of conformity is available from one of the following internet addresses: - Products, Download from www.miele.co.uk... -
Page 86: Settings
Settings Selecting settings You can use the settings to alter the washing machine's electronics to suit Touch the sensor controls until changing requirements. the setting you want appears in the display. The settings can be altered at any time. - The sensor control scrolls down the list. -
Page 87: Language
Settings Language Welcome tone The volume for the welcome tone can The display can be set to appear in one be set to one of 7 different settings. of several different languages. The flag after the word acts Selection Language as a guide in case a language which is not understood has been set. -
Page 88: Code
– (factory default) Do not forget the code you have set. – (light) If you forget the code, only Miele Buttons inactive Technical Service can unlock the Controls the brightness of the sensor washing machine. -
Page 89: Disp. Switch-Off Stat
Settings Disp. switch-off stat. Memory The display and the sensor control The washing machine will save the last lighting is switched off to save energy. settings (temperature, spin speed and sensor control some of the extras) selected for a pro- Start Add laundry flashes slowly. -
Page 90: Soak Duration
Temp. reduction (factory default) Normal Plus At high altitudes, water has a lower boiling point. Miele recommends ac- Plus tivating the reduced temperature set- Plus ting at altitudes of 2000 m or above to prevent water from boiling. The max- imum temperature is reduced to 80 °C... -
Page 91: Maximum Rinse Level
Settings Maximum rinse level Low water pressure This function is important for allergy If the water pressure is below 100 kPa sufferers as it achieves excellent rinse (1 bar), the washing machine cancels results. the programme and the Water intake fault message appears. See ... -
Page 92: Miele@Home
Deactivate tivated) - The WiFi connection will be reset to the factory default setting. Miele@home remains set up, the WiFi function is switched off. The network configuration should be re- set whenever a washing machine is be- (visible if Miele@home is deac-... -
Page 93: Remote Control
Miele@home Miele@home and activated. activated. Once the Miele app has been installed You can set your washing machine to on your mobile device, you can check start automatically based on an ex- the status of your washing machine ternal signal within a certain time from anywhere and start it remotely. -
Page 94: Remoteupdate
If you do not install an update, you can The update may take several minutes. continue to use your washing machine Please note the following information in the usual way. However, Miele re- about the RemoteUpdate function: commends installing updates. - You will only receive a message when Activating/Deactivating an update is available. -
Page 95: Copyrights And Licences For The Communication Module
These items of software/software components are pro- tected by copyright. The copyrights held by Miele and third parties must be re- spected. Furthermore, this communication mod- ule contains software components which are distributed under open source licence conditions. -
Page 96: Detergents And Care Products
All - For wool, silks and delicates products have been designed for Miele - Special care complex based on wheat washing machines. protein and with colour-protection These and many other products can be formula ordered from www.shop.miele.com, the... -
Page 97: Specialist Detergents
- Visibly renews fabric with just one wash - Retains the elasticity and breathabil- ity of down - Special Miele formula with No- vozymes technology - Lanolin for effective cleaning and gentle care - Removes pilling and renews colour in-... -
Page 98: Fabric Care
Detergents and care products Fabric care Machine care These fabric care products are available Descaling agent as convenient single-use capsules. - Removes heavy limescale deposits Fabric conditioner cap - Mild and gentle with natural citric - Fabric conditioner for freshly scented acid laundry - Gentle on heater elements, drum and... - Page 99 United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...
- Page 100 WWG 360 en-GB, IE M.-Nr. 12 029 640 / 03...