Table of Contents
Advertisement
3. Removing the shipping
struts
Failure to remove the shipping
struts can result in damage to the
washing machine and to adjacent
cabinetry or appliances.
Remove the shipping struts as
described in "Installation and
connection".
The following message appears in the
display:
Remove shipping struts
Confirm with the OK sensor button.
4. Commissioning TwinDos
The UltraPhase 1 and UltraPhase 2
values are pre-set in the standard
settings and only need to be confirmed.
The following message appears in the
display:
TwinDos
Confirm with OK
The following message appears in the
display:
Set up now
To set up TwinDos now, touch the OK
sensor button.
To postpone setup until later, touch
the sensor button until
appears in the display and press the
OK button to confirm.
Settings for compartment
The UltraPhase 1 values are pre-set in
the standard settings.
Confirm with the OK sensor button.
Miele UltraPhase 1
Confirm with the OK sensor button.
The following will appear in the display:
Set the dosage. Observe water hardness
levels
Confirm with the OK sensor button.
The dispensing quantity for
UltraPhase 1 for (hardness range I)
is pre-set.
Per load
Confirm the pre-set value with the OK
Hardness level I
Set up later
Hardness level II
Hardness level III
Initial commissioning
Agent for
sensor button or correct the value
with the sensor buttons and
confirm this with the OK sensor
button.
UltraPhase 1
OK
OK
48
ml
OK
48 ml
60 ml
72 ml
19
- Quick Links:
- Operating the Washing Machine
- Twindos
Hide quick links:
Advertisement
Chapters
Table of Contents
