Table of Contents
Advertisement
Activating the ComfortClean
self-cleaning function
Always run the interim cleaning function
for the fine dust filter before emptying
the dust container. You should also run
it whenever the suction power begins to
drop.
This enables the vacuum cleaner to
achieve the very best cleaning perform-
ance again straight away.
Turn the screw cap 3 times by 180°.
When turning the cap, you will hear a
noise, which is a normal part of how the
ComfortClean self-cleaning function
works.
Cleaning and care
Emptying the dust container
Empty the dust container at the latest
when the dust has reached the Max.
marking on the dust container.
Provided that no prohibited sub-
stances are present, the contents of
the dust container can be disposed of
with normal household waste.
Hold the dust container close to the
bin to prevent dust from billowing out.
Press the release button on the bot-
tom of the dust container.
The flap will open and the dust will fall
out.
If dust balls, hair or coarse debris do
not fall out, remove the pre-filter by
pulling it downwards (see the following
section: "Cleaning the dust container
and pre-filter").
Close the dust container flap, making
sure it clicks into place.
Cleaning the dust container and
pre-filter
Clean the dust container and pre-filter
as required.
27
Advertisement
Table of Contents
