Table of Contents
Advertisement
With the help of the following guide, minor faults in the performance of the
appliance, some of which may result from incorrect operation, can be remedied
without contacting Miele. This will save you time and money because you will not
need a service call. If, after reading this guide, you cannot remedy the problem
yourself, please call Miele (see back cover for details).
Danger of injury.
Installation, maintenance and repairs may only be carried out by a suitably
qualified and competent person. Repairs and other work by unqualified persons
could be dangerous. Miele cannot be held liable for unauthorised work.
Do not attempt to open the casing of the cooktop yourself.
Please note that a call-out charge will be applied to unnecessary service visits
where the problem could have been rectified as described in these operating
instructions.
Problem
The SmartLine
appliance cannot be
switched on.
The power levels 1 to B
light up one after the
other.
Possible cause and remedy
There is no power to the SmartLine appliance.
Check if the circuit breaker has tripped. Contact
an electrician or Miele (for the minimum fuse
rating, see data plate).
There may be a technical fault.
Disconnect the SmartLine appliance from the
mains electricity supply for approx. 1 minute by
– switching off at the wall socket and withdrawing
the plug, or
– switching off the main circuit breaker or residual
current device.
If, after resetting the fuse in the mains fuse box or
the residual current protection device, the
SmartLine element will still not switch on, contact
a qualified electrician or Miele.
An automatic reset is performed after an interruption
to the power supply.
Problem solving guide
25
- Quick Links:
- Installation Notes
Hide quick links:
Advertisement
Table of Contents
