Page 1
Operating and Installation Instructions Ventilation System To prevent accidents and damage to the appliance, you must read these instructions before installing the appliance and using it for the first time. en-US M.-Nr. 10 296 130...
Contents IMPORTANT SAFETY INSTRUCTIONS .............. 3 Caring for the environment ................ 12 Description of functions .................. 13 Guide to the appliance .................. 14 Operation...................... 16 Turning on the fan....................16 Selecting the power level ..................16 Selecting the delayed shut down time ..............17 Turning off the fan ....................
IMPORTANT SAFETY INSTRUCTIONS READ AND SAVE THESE INSTRUCTIONS This appliance complies with current safety requirements. Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the appliance for the first time. Only use the appliance for its intended purpose. Keep these operating instructions in a safe place and pass them on to any future user.
Installation, repair and maintenance work should be performed by a Miele authorized service technician in accordance with national and local safety regulations and the provided installation instructions. Contact Miele’s Technical Service Department for examination, repair or adjustment.
Page 5
IMPORTANT SAFETY INSTRUCTIONS Be certain your appliance is properly installed and grounded by a qualified technician. To guarantee the electrical safety of this appliance, continuity must exist between the appliance and an effective grounding system. It is imperative that this basic safety requirement be met.
IMPORTANT SAFETY INSTRUCTIONS Defective components should be replaced by Miele original parts only. Only with these parts can the manufacturer guarantee the safety of the appliance. During installation, maintenance, and repair work, the ventilation hood must be disconnected from the electrical supply. It is only...
Page 7
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A COOKTOP GREASE FIRE, OBSERVE THE FOLLOWING*: – a) SMOTHER FLAMES with a close fitting lid, cookie sheet, or metal tray then turn off the burner. BE CAREFUL TO PREVENT BURNS.
Page 8
IMPORTANT SAFETY INSTRUCTIONS Overheated oils and fats can ignite and set the ventilation hood on fire. When cooking with oils or fats, do not leave pots, pans or fryers unattended. Never leave an electric grill unattended when grilling. Fat and debris deposits impair the proper functioning of the ventilation hood.
Page 9
IMPORTANT SAFETY INSTRUCTIONS Proper installation WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING: – a) Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction.
Page 10
Wear gloves to protect your hands from being cut. When installing the exhaust duct, only use pipes or tubes made of non-flammable material. These can be obtained from your Miele dealer or from Miele Technical Service. Exhaust air should not be vented into a chimney or vent flue which is otherwise in use and should not be channeled into ducting which ventilates rooms with fuel-burning installations.
Never use a steam cleaner to clean the ventilation hood. The steam can reach the electrical components and cause a short circuit. Accessories Use only genuine original Miele parts. If parts or accessories from other manufacturers are used, the warranty will become void.
Caring for the environment Disposal of the packing Disposal of your old appliance material Do not dispose of this appliance with your household waste. The cardboard box and packing materials protect the appliance during Old appliances may contain materials shipping. They have been designed to that can be recycled.
Description of functions The following functions are available on your ventilation hood, depending on the model: Recirculation mode This ventilation hood operates solely in recirculation mode. The air drawn in is cleaned by the grease filters and then by 2 OdorFree charcoal filters.
Page 15
Guide to the appliance a Suspension cables b Canopy c OdorFree charcoal filter holders d Grease filters e Control panel The symbols serve as sensor buttons. You select the functions by pressing these buttons. You will hear a brief beep as confirmation. f Overhead lighting g OdorFree charcoal filters (x 2) h Recirculation vents...
Operation Turning on the fan Automatic power reduction of the intensive setting Tap the On/Off button . The intensive level can be programmed The fan switches to level 2. to switch back to level 3 automatically after 10 minutes. Selecting the power level ...
Operation Selecting the delayed shut down time It is a good idea to let the fan run for a few more minutes after cooking in order to neutralize any lingering vapors and odors in the air. With the delayed shut down function, it is possible to have the fan automatically shut off after a predetermined period of time.
Operation Dimming/switching the Filter saturation indicator overhead lighting on/off The number of hours the hood has been in operation is stored in appliance The overhead lighting can be switched memory. on and off and dimmed independently of the fan. The filter saturation indicators show when the filters need to be cleaned or ...
Operation The indicators 1 to 4 show the current Activating/changing the OdorFree time setting: Charcoal Filter operating hours counter Indicator 1 ......20 hours Charcoal filters are needed for Indicator 2 ......30 hours recirculation mode. Indicator 3 ......40 hours The operating hours counter for the charcoal filter requires one-time Indicator 4 ......
Operation Checking the filter saturation indicator Before the set operating time has run out, you can check what percentage of the time has elapsed. Press the On/Off button to turn the fan on. Press and hold the grease filter button ...
Operation Sensor button signal tone Whenever you select a feature with the sensor buttons, you will hear a brief signal tone. You can deactivate this signal tone if you prefer. Press the On/Off button to turn the fan off. ...
Cleaning and care Special instructions for RAL color WARNING: TO REDUCE THE RISK finish housing OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE Observe the general cleaning THE FOLLOWING: instructions contained in this chapter. Before cleaning or servicing the It is very difficult to clean this type of surface without causing minor marks hood, disconnect it from the power...
Cleaning and care Grease filters The reusable metal grease filters in the appliance remove the solid particles contained in kitchen vapors (fat, dust, etc.), thereby preventing the ventilation hood from becoming dirty. A dirty filter is a fire hazard! Cleaning intervals Over longer periods of time, fat buildup on the grease filter hardens and makes...
Select a program with a wash Reinstall the grease filters. When temperature between 120°F (50°C) and 150°F (65°C). In a Miele inserting the filters, make sure that dishwasher use the "Normal" the locking clip is facing down.
They are fitted into the canopy above the grease filters. Remove the charcoal filter from its packaging. Charcoal filters are available from your Miele dealer or from Miele. See "Technical data" for the type and reference number. Open the holders for the charcoal filters.
Cleaning and care When installing the filter for the first Disposing of the OdorFree Charcoal time, activate the filter saturation Filter counter (see "Operation"). Used charcoal filters can be disposed of with normal household waste. When to change the OdorFree Charcoal Filter ...
Cleaning and care Changing a halogen lamp The halogen lights become very hot during operation. They can cause burns even after being shut off for some time. Allow them to cool down for a few minutes before changing the halogen lamps.
Service and warranty For faults that you cannot resolve on your own, please contact your Miele dealer or Miele Technical Service. The telephone number for the Technical Service Department is listed at the back of these instructions. When contacting Miele, please state the model and serial number of your ventilation hood.
Installation Before installation Before installing the appliance, read all of the information contained in this chapter and also in the "IMPORTANT SAFETY 4 mounting sets INSTRUCTIONS" section. For hanging the ventilation hood, consisting of 4 cables, 4 ceiling Installation parts fasteners, and 4 caps.
Please also observe the information contained in the "IMPORTANT SAFETY INSTRUCTIONS" section. Minimum distance S Cooking appliance Miele range Non-Miele range Electric Cooktops 24" (610 mm) Electric Barbeques and Fryers 26"...
Installation Installation recommendations Structural support – We also recommend a distance of at least 25 ¹/₂" (650 mm) above electric cooktops to provide more workspace and easier cooking under the hood. – When selecting an installation height, always take the user height into consideration.
Green wire: connect to GND (ground) for use with this model hood. If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or call Miele’s Technical Service Department. WARNING: THIS APPLIANCE MUST BE GROUNDED...
Technical data Fan motor 100 W Overhead lighting 3 x 20 W Total connected load 160 W Voltage, frequency 120 V AC, 60 Hz Fuse rating 10 A Power cord length 5.9 ft. (1.8 m) Weight 70.5 lbs (32 kg) Optional accessories for recirculation mode: OdorFree charcoal filter set DKF 26-1.
Page 35
Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...
Page 36
DA 7000 D en-US M.-Nr. 10 296 130 / 01...