Table of Contents
Advertisement
If the worktop is more than 24 mm
deep, it must be cut out underneath
on the building-in side on the right or
left-hand side.
a Worktop
b Maximum 24 mm
c 12 mm
Securing the bracket
1 bracket (supplied with the spacer bar)
must be secured centrally to the right or
left-hand side of the cutout.
Wooden worktops
Fit the bracket so that it sits flush
with the top edge of the worktop cut-
out.
Secure the bracket with the
3.5 x 25 mm wood screws supplied.
Surface-mounted installation
Granite and marble worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
bracket.
Stick the tape along the top edge of
the worktop cut-out.
Fit the bracket so that it sits flush
with the top edge of the worktop cut-
out.
Press the bracket firmly into position.
37
- Quick Links:
- Installation Notes
Hide quick links:
Advertisement
Table of Contents
