Operating instructions for Cooker Hoods DA 200, DA 200 EXT, DA 210, DA 210 EXT, DA 220, DA 220 EXT Q@ä It is essential to read these operating instructions before installing or using the machine, to avoid the risk of accident or damage to the machine.
Caring for the environment Caring for the environment Disposal of packing Disposal of your old material machine / appliance The transport and protective packing Old machines / appliances contain ma- has been selected from materials terials which can be reclaimed or re- which are environmentally friendly for cycled.
Warning and Safety instructions Warning and Safety instructions Appropriate use of the cooker This appliance meets statutory hood safety requirements. Inappropriate use could however lead to risk of ac- The appliance is intended for do- cidents to the user and damage to mestic use only.
Page 5
Warning and Safety instructions The appliance is only completely Use of the appliance isolated from the electricity supply Never use an open flame beneath when: the cooker hood - to avoid the – it is switched off at the wall socket danger of fire do not flambé...
Page 6
These can be obtained from the cooker hood (when the vapour guide is Miele Spare Parts department or from completely retracted) must measure at builders’ merchants. least: The appliance must not be con- –...
Page 7
Warning and Safety instructions When using the cooker hood at the only for appliances with external fans same time as another heating ap- For appliances with an external fan pliance which depends on the air in the motor fitted (EXT models) the con- room, (e.g.
Descripton of the functions Descripton of the functions The cooker hood works with . . . an external fan The ...EXT models of cooker hoods are . . . Air extraction: designed to be connected with an ex- The air is drawn in and cleaned by the ternal fan.
Guide to the appliance Guide to the appliance DA 200, DA 200 EXT Touch control for hob lighting Touch control for the run-on option On/Off touch control Touch control for the grease filter(s) Touch control - power level Cover frame...
Guide to the appliance DA 210, DA 210 EXT Touch control for hob lighting Touch control for the run-on option On/Off touch control Touch control for the grease filter(s) Touch control - power level Cover frame Vapour guide Tower Main switch...
Guide to the appliance DA 220, DA 220 EXT Touch control for hob lighting Touch control for the run-on option On/Off touch control Touch control for the grease filter(s) Touch control - power level Cover frame Vapour guide Tower Main switch...
Operation Operation To select the functions, press the Selecting the power level touch controls gently with your finger. Depending on how much the air needs to be filtered, there are four power le- Switching on vels available. For normal cooking a Set the main switch to "I".
Operation Run-on option Switching off If the air still needs to be cleared after Use the On/Off touch control to cooking, the cooker hood can be set to switch the fan off. continue running. Only use the main switch if the cooker It will then switch off the fan motor auto- hood is not going to be used for a matically after a further 5 or 15 minutes.
Operation Altering the filter operating hours Filter operating hours counter counter An indictor lamp shows when the You can match the maximum time for grease filter needs to be changed. The the filter operating hours counter to suit operating hours counter is set at the the type of cooking you do.
Cleaning and Care Cleaning and Care Before any cleaning or maintenance An over-greasy filter is a fire hazard. work the cooker hood must be dis- connected from the mains supply – withdrawing the fuse from the fused spur connection unit (if accessible), or –...
Cleaning and Care Changing a light bulb Disconnect the cooker hood from the mains supply by – withdrawing the fuse from the fused spur connection unit (if accessible), or – withdrawing the mains fuse, or – removing the screw-out fuse, (in countries where this is applicable).
In the event of any faults which you can- not easily remedy, please contact: – Your Miele Dealer – Your nearest Miele Service Dept, (see address on the back page). When contacting the Service Depart- ment, please quote the Model and Ser-...
Technical data Rated load General notes – DA 200, DA 210, DA 220 ..340 W All electrical work should only be under- – DA 200 EXT, DA 210 EXT, DA 220 EXT ..max. 410 W...
Installation Installation Safety regulations prohibit the fitting of this cooker hood over a solid fuel stove. The minimum safe distance be- tween the top of the hob and the bottom of the cooker hood should be at least: – 55 cm above electric hobs, –...
Page 21
Installation Ceiling plate: DA 200 / DA 200 EXT Ceiling plate: DA 220 / DA 220 EXT Address the ceiling pate and posi- tion it exactly. The orange coloured arrow on the ceiling plate must face to the front of the cooker hood.
Page 22
Installation Use the hose clip to secure the ex- In further description only one ceil- haust hose to the ceiling plate. ing plate is shown. Pull the mains connection cable through the ceiling plate. Screw the Drill 10 mm Ø holes in the ceiling, ceiling plate to the ceiling with the and insert S10 plugs into the holes.
Page 23
Installation Shorten the cable for electrical con- Assemble the tower. Place the flange nection as much as possible and se- plate of the tower onto the ceiling cure inside the cooker hood chimney plate in such a way that the spring with the cable clips.
Connection for extraction Connection for extraction – When ducting is horizontal it must be Danger of toxic fumes. laid to slope away at 1 cm per metre, Please heed the "Warning and to ensure no condensate drains into Safety instructions" to avoid the the appliance.
Page 25
Connection for extraction only for models DA 200, DA 210, Connection DA 220: Only use narrower diameter pipe- In addition to insulating the exhaust work where it is unavoidable, for ducting we recommend that a suitable example where existing pipework condensate trap is also installed to col- has to be used.
Connection to an external fan Connection to an external fan EXT model cooker hoods are designed for use with an external fan, i.e. the fan is fitted outside the room in a position of your choice. Electrical connection is made via a con- necting lead with plug and coupling.
Page 28
Alteration rights reserved / 44 / 003 GB/AUS/NZ - 1198 This paper consists of cellulose which has been bleached without the use of chlorine.