Advertisement
Supervisor level
Process technology
Anti-crease
At the end of the program, the drum will continue to rotate at intervals if the laundry is not
removed immediately.
Changing this setting leads to increased energy consumption.
The setting for Anti-crease can either be switched off or a time between 1 and 12 hours
can be selected.
Factory default: 2 hours
Drying levels
Changing this setting leads to increased energy consumption.
You can alter the drying levels for the
Drying levels
Cottons
Factory default: Normal
Additional cooling
If extended cooling is activated, the drum temperature is checked approx. 1 minute before
the machine goes into standby mode at the end of the program. If the temperature is
above 130°F (55°C), the dryer will carry out cooling until it is below 130°F (55°C).
Changing this setting leads to increased energy consumption.
- Factory default: Off
- On
Cooling down temperature
The laundry will be cooled down automatically after the end of the program. The automatic
cooling phase can be set at a cooler level for all programs. This means that the cooling
phase is extended.
Changing this setting leads to increased energy consumption.
The setting can be changed from 104-131°F (40°C–55°C).
Factory default: 131°F (55°C)
Door opening status
If program interruption in the event of door opening is activated, the tumble dryer remains
in the current program when the door is opened and the program continues once the door
has been closed and the Start/Stop button has been pressed.
- Factory default:
Cancel program
-
Interrupt program
54
Cottons
,
, and
Minimum Iron
Automatic Plus
,
, and
Minimum Iron
Automatic Plus
can be set to one of 7 different levels.
programs.
Advertisement
