Table of Contents
Advertisement
Temperature unit
You can select the unit for the temper-
ature display.
Factory default: °C/Celsius
Weight unit
You can decide whether load quanti-
ties are displayed in "kg" or "lbs". You
can also switch this information off al-
together.
Factory default: kg
Logo
You can choose whether the "Miele
Professional" logo or your own logo
appears in the display.
The option
Laundrette Logo
lected for the setting
Supervisor code
You can alter the access code to the
supervisor level.
Enter the current code.
Enter a new code.
must be se-
.
Controls
Supervisor level
Programme selection
Controls
You can select whether the machine is
operated as a launderette machine.
Shortcuts are the easiest way to oper-
ate the machine. Operating staff are
unable to change pre-set programmes.
Tip: Start by configuring all necessary
settings and changes to the washing
machine before adjusting any of the op-
tions below.
If "Launderette, basic" or "Laundrette
Logo" are selected, the Supervisor level
can no longer be opened from the dis-
play after the Supervisor level menu is
closed. Please follow the instructions
below if you wish to change any other
settings.
Opening the Supervisor level (wash-
salon version)
Switch on the washing machine and
open the door.
Touch the Start/Stop sensor control
and hold it down whilst carrying out
steps -.
Close the washing machine door.
The Start/Stop sensor will now be
flashing quickly; wait until it lights up
constantly.
Release the Start/Stop sensor con-
trol when the Start/Stop sensor
lights up constantly.
87
Advertisement
Table of Contents
