Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Miele G 7266
Summary of Contents for Miele G 7266
- Page 1 User manual Dishwashers Always read the operating instructions and the installation sheet before setting up, installing, and commissioning the appliance. This prevents both personal injury and damage to the machine. en-CA HG07 M.-Nr. 12 515 570...
-
Page 2: Table Of Contents
Closing the door ......................21 Miele@home (depending on model) ................22 Basic settings........................23 Setting the language ....................23 Setting up Miele@home (depending on model) ..........23 Setting the water hardness ..................24 Reactivation salt ......................25 Filling the salt reservoir .................... 26 Refilling the salt...................... - Page 3 Contents Hygiene cycle ........................38 Water connection......................38 Information ........................38 Showroom program ....................... 38 Factory default ........................ 38 Copyrights and licenses for the communication module......... 39 Caring for the environment ..................40 Energy-saving dishwashing................... 40 Loading the dishwasher....................41 General information .......................
- Page 4 Contents Cleaning and care ......................71 Cleaning the wash cabinet.................... 71 Cleaning the door and the door seal ................71 Cleaning the control field ....................71 Cleaning the reflector panel..................71 Cleaning the appliance front..................72 Cleaning the spray arms....................73 Checking the filters in the wash cabinet..............
-
Page 5: Warnings And Safety Instructions
Miele cannot be held liable for injury or damage caused by non- compliance with these instructions. Keep the installation sheet and the operating instructions in a safe place and pass them on to any future owner. - Page 6 It is most important that this basic safety requirement is fulfilled. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of grounding system (e.g., electric shock).
- Page 7 The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronized with the grid power supply, or these measures must be replaced by equivalent measures in the installation.
- Page 8 when it is connected to a fully vented plumbing system. The built-in Miele Waterproof system offers reliable protection against water damage if the following conditions are met: - Installation has been carried out correctly. - The dishwasher is properly maintained and parts are replaced in case of noticeable damage.
- Page 9 specific cable of the same type (available from Miele Service). For safety reasons, this must only be done by Miele Service or a service technician authorized by Miele. Do not place the dishwasher on the water inlet hose. The water ...
- Page 10 The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact Miele Customer Service. The minimum/maximum weight of the front panel is quoted in the technical data for your dishwasher on the Miele website.
- Page 11 Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance, and, if applicable, product liability claims will be invalidated.
- Page 12 Warnings and safety instructions Only transport the dishwasher in an upright position so that no water flows into the electrical controls, as this would cause faults. If you wish to transport the dishwasher, empty it and securely fasten all loose parts such as baskets, hoses, and power cables. Disposal of your old dishwasher Remove the door of the dishwasher so that children cannot ...
-
Page 13: Notes On The Operating Instructions
Notes on the operating instructions These operating instructions apply to Additional information and comments several different dishwasher models of Additional information and comments different heights. are contained in a narrow frame. The different dishwasher models will be named as follows: Instructions for the user normal = dishwasher measuring 81.5 cm high (built-in appliance) -
Page 14: Items Included
Items included The following items are supplied: - dishwasher - operating instructions for operating the dishwasher - installation sheet for installing the dishwasher - other installation accessories for installing the dishwasher (see installation sheet) - funnel for filling the reactivation salt - additional printed matter and add-ons if required... -
Page 15: Guide To The Appliance
Guide to the appliance Machine overview a Door locking pins h Filter combination b Top spray arm i Salt reservoir c 3D MultiFlex cutlery tray j Data plate d Upper basket (depending on model) k Rinse aid reservoir e Middle spray arm l Detergent compartment f Aeration valve Lower basket (see next page) -
Page 16: Lower Basket
Guide to the appliance Lower basket a FlexCare Glass & Bottle b MultiClip c XL-Assist d Hinged spikes... -
Page 17: Control Field
Guide to the appliance Control field Extras Express Timer Back Program Normal Pots Crystal Quick Sani More a In-operation indicator light g Express button For indicating an ongoing wash For reducing the program cycle time. program when the door is closed. h Extra options button b Display for selecting extra options... -
Page 18: Display Functions
Guide to the appliance The OK button is used to confirm a Display functions message or setting and also to move to The display is used to select or set the the next menu or another menu level. following: Under More, a scroll bar will appear - the program in the right of the display. -
Page 19: Caring For The Environment
Therefore, please do not dispose of your old appliance with general waste. Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed. -
Page 20: Initial Commissioning
Initial commissioning Every dishwasher is tested at the Risk of scalding due to hot water. factory. There will be residual water in During operation, water in the the machine from this test. It is not an dishwasher may be very hot. indication that the dishwasher has During operation, only open the door been used previously. -
Page 21: Closing The Door
Initial commissioning Closing the door Push the baskets in. Press the door until the door latch engages. At the end of the program, if the AutoOpen function is on, the door locking rail must be fully retracted before the door is closed. Otherwise, the door locking rail will hit the door. -
Page 22: Miele@Home (Depending On Model)
Miele depends on the availability of the app. Miele@home service in your country. The Miele app will guide you as you The Miele@home service is not connect your dishwasher to your home available in every country. -
Page 23: Basic Settings
Set up Miele@home Open the door. appear on the display. Turn the dishwasher on with the To set up Miele@home now, confirm button. by touching OK. The welcome screen will appear when Useful tip: To postpone setup until later, the dishwasher is turned on. -
Page 24: Setting The Water Hardness
Initial commissioning Setting the water hardness Finally, prompts will appear in the display. The display changes to the screen for After confirming these prompts with setting the water hardness. OK, the messages Refill salt - You should program the dishwasher to may appear. -
Page 25: Reactivation Salt
Initial commissioning Reactivation salt If the water in your area is very soft and constantly lower than 5 gr/gal In order to achieve good cleaning (5 °dH), you do not need to add results, the dishwasher needs to reactivation salt. The salt refill indicator operate with soft water. -
Page 26: Filling The Salt Reservoir
Initial commissioning Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 1.5 L of water to enable the salt to dissolve. Once the dishwasher has been commissioned, there is always sufficient water in the salt reservoir. ... -
Page 27: Refilling The Salt
Initial commissioning Refilling the salt After the salt reservoir has been filled, the refill indicator may still appear in the When the refill reminder Refill salt display if the salt concentration has not appears in the display, wait until the yet reached the correct level. -
Page 28: Rinse Aid
Initial commissioning Rinse aid If you only ever wish to use combination detergent products in Rinse aid is necessary to ensure water your dishwasher, you do not need to does not cling and leave marks on add rinse aid. dishware during the drying phase and However, for optimum rinsing and helps dishware dry faster after it has drying results, use dishwasher... -
Page 29: Adding Rinse Aid
Initial commissioning Adding rinse aid Wipe up any spilled rinse aid. This prevents over-foaming occurring during the next program. You can adjust the rinse aid dosage for best wash results (see “Rinse aid” under “Settings”). Filling the rinse aid reservoir When ... -
Page 30: Settings
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements by Use the buttons to select the adjusting the settings (depending on menu option you want to change and model). confirm your selection with OK. The settings can be altered at any Sub-menu options that have already time. -
Page 31: Language
Settings Language Water hardness The display can be set to appear in one Your dishwasher is fitted with a water of several different languages. softener. You can change the language used in - You should program the dishwasher to the display and also the country via the the correct water hardness for your sub-menu. - Page 32 Settings Setting the water hardness °d gr/gal °fH Display Select the water hardness level in your area and confirm with OK. 37-45 39-47 66-80 37-45 46-59 48-62 82-105 46-59 61-70 64-73 109-125 61-70...
-
Page 33: Rinse Aid
Wi- activated for the respective program. Fi network: Connect using App The Miele app is available to download free of charge from the Apple App ® Store or from the Google Play Store™. - Page 34 Deactivate sequence of your dishwasher. menu option will now be displayed instead of Activate - Set up a Miele@home network with other Wi-Fi-enabled Miele appliances. Displaying Connection status Connect using WPS You can call up the current connection status of your dishwasher.
-
Page 35: Remote Control (Depending On Model)
Even if the option is Remote control turned off, you can use the Miele app to call up information about your machine. However, you cannot start any programs or change any settings from it. -
Page 36: Remote Update (Depending On Model)
Information about the content and scope of a RemoteUpdate will be The RemoteUpdate menu option is provided in the Miele app. only displayed and can only be selected if the requirements for using A message will appear in your... -
Page 37: Display Brightness
Miele PowerDisks (if program, then make sure that you available), you can turn off the refill open the door fully. -
Page 38: 2Nd Interim Rinse
Wi-Fi module settings (where applicable) have to be reset separately Water connection (see “Miele@home” under “Settings”). You can set your water connection type. Select and confirm with OK. Reset If you select... -
Page 39: Copyrights And Licenses For The Communication Module
These items of software/software components are protected by copyright. The copyrights held by Miele and third parties must be respected. In addition, the communication module contains software components which are distributed under open source licensing terms. -
Page 40: Caring For The Environment
Caring for the environment Energy-saving dishwashing This dishwasher is exceptionally economical in its use of water and electricity. For best results, follow these tips: - Washing in a dishwasher generally uses less water and energy than washing by hand. - There is no need to pre-rinse items under running water. -
Page 41: Loading The Dishwasher
Loading the dishwasher - The spray arms must not be blocked General information by items which are too tall or hang Remove coarse food residues from through the baskets. Test for free dishware. movement by manually rotating the There is no need to pre-rinse items spray arms. - Page 42 Loading the dishwasher Items not suitable for dishwashers: Damage due to caustic alkaline - Wooden cutlery and dishware or detergents. items with wooden parts. These may Aluminum parts (e.g., the grease discolour and fade. The glue used in filters of ventilation hoods) can be these items is not dishwasher-safe damaged by caustic alkaline and wooden handles may come loose...
-
Page 43: Loading Examples
Loading the dishwasher Loading examples Loading for 10 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray... - Page 44 Loading the dishwasher Loading for 16 standard place settings with cutlery tray Upper basket Lower basket Cutlery tray...
-
Page 45: Upper Basket
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls, and flat Loading the upper basket dishware on the FlexCare cup rack. Glasses can be arranged along the Risk of damage due to water FlexCare cup rack so they sit securely leakage. - Page 46 Loading the dishwasher Adjusting the FlexCare cup rack Lowering the spikes You can set the height and depth of the On both right-hand rows of spikes, you cup rack at 2 different levels so that it can lower every other spike to make it can accommodate larger cups and so easier to arrange larger dishware, like that taller items can be placed...
-
Page 47: Adjusting The Upper Basket
Loading the dishwasher Lower the upper basket: Adjusting the upper basket In order to gain more space for taller items in the lower basket or upper basket, the upper basket can be adjusted on 3 levels with 3/4" (2 cm) between each level. The upper basket can also be set at an angle so that water can run off freely from recesses. -
Page 48: Lower Basket
Loading the dishwasher Lowering the spikes Lower basket The rows of spikes at the front are used Loading the lower basket for loading plates, soup bowls, platters, Place larger and heavier items such as dessert bowls, and saucers. plates, serving platters, saucepans, Both right-hand rows of spikes can be bowls, etc., in the lower basket. - Page 49 Loading the dishwasher FlexCare Glass & Bottle Loading the glassware holders The glass and bottle holders are used to The silicone elements in the glassware wash stemware, tall glasses, and holder provide a stable and secure hold bottles. for delicate stemware. Adjusting the FlexCare Glass &...
- Page 50 Loading the dishwasher Loading the FlexCare Glass & Bottle The glass and bottle holders can be used to keep tall, narrow, and hollow containers, e.g., beer glasses, bottles, vases, secure during a program. Lean the containers into the holders. Useful tip: For the best cleaning results, use the “BottleClean”...
- Page 51 Loading the dishwasher MultiClip The MultiClips enable you to fasten light load items such as those made from plastic. Slightly lift the XL-Assist , fold it out , and hook it back in the new position . Secure light items to the MultiClips. Make sure that dishware does not obstruct the middle spray arm.
-
Page 52: Cutlery Tray
Loading the dishwasher You can push the left insert to the Cutlery tray middle in order to accommodate tall Arrange the cutlery in the cutlery tray items and long stemmed glasses in the as shown. upper basket. You can put large and long cutlery in the Loading the 3D MultiFlex Tray recessed middle part of the tray. -
Page 53: Detergent
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Damage caused by using These detergents allow you to adjust unsuitable detergents. the amount dispensed according to Detergents that are not suitable for the load size and the level of soiling. domestic dishwashers can cause - Tab detergents. -
Page 54: Detergent Dispensing
Detergent Detergent dispensing Risk of chemical burns from detergent. The detergent compartment holds a maximum of 50 ml. Dishwasher detergents can cause burning on the skin and in the eyes, There are marks in the detergent nose, mouth, and throat. compartment to aid with dispensing: Avoid contact with detergents. -
Page 55: Adding Detergent
Detergent Adding detergent The detergent must not cause the detergent-compartment lid to get stuck. This can prevent the lid from opening during the program. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together. -
Page 56: Operation
Operation Switching on the dishwasher Selecting a program Turn on the water supply if it is turned Choose your program according to the off. type of load and the degree of soiling. The different programs and their uses Open the door. are described in the Program overview. -
Page 57: Display Of Program Cycle Time
Operation Display of program cycle time Starting a program The estimated duration of the selected Start the program by closing the door. program appears on the display before If necessary, confirm the previously the program begins. If the door is displayed message with OK. -
Page 58: End Of The Program
Operation End of the program Energy management At the end of the program, the in- To save energy, the dishwasher will operation indicator light will be flashing switch off automatically 10 minutes slowly with the door shut. The buzzer after the last time a button is pressed or might also be sounding. -
Page 59: Turning Off The Dishwasher
Operation Turning off the dishwasher Unloading the dishwasher Open the door. Dishware tends to break and chip more easily when it is hot. Allow dishware to The dishwasher can be turned off at cool until it is comfortable enough to any time using the button. -
Page 60: Interrupting A Program
Operation Interrupting a program Cancelling or changing a program A program will be interrupted as soon as the door is opened. If a program is cancelled, important If the door is closed again, the program program stages may be missed. will continue from the point it was at A program should only be cancelled before the door was opened. -
Page 61: Options
Options Activating the timer Timer Open the door. You can set the start time of a program. The program start time can be delayed Turn the dishwasher on with the for between 30 minutes and 24 hours. button. With start time delays between ... - Page 62 Options Starting a program before the time for After you have activated the timer, all the timer has elapsed: the displays will turn off after a few minutes to save energy. A program can be started before the time for the timer has elapsed. Press the button to switch the Proceed as follows: display back on again for a few...
-
Page 63: Activating "Remote Start
You can start your dishwasher remotely under Additional using the Miele app. To do this, you first programs / Settings. The option will need to install the app on your mobile also remain active if you turn the... -
Page 64: Program Overview
Program overview Program When to use Program sequence Pre- Main Interim Final Drying rinse wash rinse rinse °F/°C °F/°C Normal Program for regular use to completely 122– 133– wash a full load of normally soiled 167/50 149/56 dishware with the ability to adjust energy –75 –65... - Page 65 Program overview Consumption Duration Energy Water Cold water Hot water Gallons/litres Cold water Hot water 50°F / 10°C 120°F / 49°C 50°F / 10°C 120°F / 49°C h:min h:min 0.97 1.05 3.2/12.1 3:01 2:43 1.40 1.55 3.4/13.0 3:29 3:11 0.85 1.05 3.3/12.5 2:51 2:25 1.00 1.10 2.8/10.5 1:18 0:58 1.45 1.55...
- Page 66 Program overview Program When to use Program sequence Pre- Main Interim Final Drying rinse wash rinse rinse °F/°C °F/°C Final rinse For performing a final rinse of dishware and hold when a complete program is not needed. Extra quiet Extra quiet program for mixed loads with 122/50 131–...
- Page 67 Program overview Consumption Duration Energy Water Cold water Hot water Gallons/litres Cold water Hot water 50°F / 10°C 120°F / 49°C 50°F / 10°C 120°F / 49°C h:min h:min 0.01 0.20 1.1/4.0 0:21 0:21 0.95 1.15 2.4/9.0 4:16 3:58 1.75 2.00 5.0/19.0 2:37 2:07 0.01 0.40 2.2/8.5 0:13 0:13 Values were calculated under standardized testing conditions.
-
Page 68: Extra Options
Extra options IntenseZone Selecting extra options You can select the IntenseZone extra You can use extra options to adjust the option to increase the cleaning programs. performance of the programs in the To do this, you can select or deselect lower basket. - Page 69 Extra options Extra clean You can select this extra option to increase the cleaning performance of the programs. When this extra option is activated, the cycle time is extended and the cleaning temperature increases. This will increase the water consumption and energy consumption.
-
Page 70: Selecting Express
Extra options Press the Express button. Selecting Express The indicator light for the button will You can reduce the cycle time using the come on if the extra option is available Express extra option. for the program selected. The time by which the program cycle If the extra option is not compatible time is shortened varies according to with the selected program, a message... -
Page 71: Cleaning And Care
Follow the instructions with a clean, damp cloth. on the product packaging. Cleaning the reflector panel Miele cleaning and care products are available to order from Miele Customer The reflector panel for the in-operation Service or from Miele’s online store. -
Page 72: Cleaning The Appliance Front
Cleaning and care To avoid damage to the outer surface, Cleaning the appliance front do not use: Damage due to soiling. - cleaning agents containing soda, Soiling that is left too long might ammonia, acid, or chloride become impossible to remove and - cleaning agents containing lime scale could cause the external surfaces to remover... -
Page 73: Cleaning The Spray Arms
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm jets and bearings. The spray cutlery tray (if present). - Page 74 Cleaning and care Removing the upper spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upward to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm counterclockwise ...
- Page 75 Cleaning and care Cleaning the spray arms Inserting the upper spray arm Refit the upper spray arm and tighten it by hand. Inserting the middle spray arm Use a pointed object to push food particles that are stuck in the spray arm jets into the spray arm.
- Page 76 Cleaning and care Inserting the lower spray arm Inserting the cutlery tray (if present) Refit the lower spray arm and ensure Slide the cutlery tray back onto the that the filter combination lies flat in rails from the front. the base of the wash cabinet.
-
Page 77: Checking The Filters In The Wash Cabinet
Cleaning and care Checking the filters in the wash Cleaning the filters cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soil from “Cleaning the spray arms” under the suds solution. - Page 78 Cleaning and care In order to clean the inside of the Rotate the screw thread clockwise filter, pull the microfilter on the plastic until the arrow in the viewing window ring downwards and away from the points to the lock symbol . filter combination.
-
Page 79: Cleaning The Drain Pump
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of a program, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove. - Page 80 Cleaning and care Damage caused by incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters. It is especially difficult to see glass splinters in the drain pump.
-
Page 81: Problem Solving Guide
The circuit breaker has tripped. Reset the circuit breaker (see data plate for the minimum fuse rating). If the circuit breaker trips again, contact Miele Service. The dishwasher is not switched on. Switch the dishwasher on with the button. -
Page 82: Fault Messages
Close the door. If the error message appears again, there is a technical fault. Turn the dishwasher off. Turn off the faucet. Contact Miele Customer Service. The Waterproof system has reacted. Waterproof Turn the dishwasher off. -
Page 83: Water Intake Fault
“Before using for the first time”) and turn the dishwasher back on again. If the same fault message appears again, contact Miele Service. The door locking pins do not retract after the door is opened. There may be a technical fault. -
Page 84: Water Drainage Fault
Problem solving guide Problem Possible cause and solution Before remedying the fault: Intake Switch the dishwasher off. There is a problem with the water intake. Turn on the water supply fully and start the program again. Clean the filter in the water intake (see “Cleaning the filter in the water intake”... -
Page 85: Noises
Problem solving guide Problem Possible cause and solution The detergent Residual detergent is blocking the catch. compartment lid cannot Remove the residual detergent. be closed. At the end of a program This is part of the normal function of the drying there is a film of system. - Page 86 Problem solving guide Problem Possible cause and solution There is a rattling noise Dishware is moving around in the wash cabinet. in the wash cabinet. Carefully open the door and rearrange the dishware so that it sits securely. There is a foreign object (e.g., glass shard) in the drain pump.
-
Page 87: Poor Cleaning Results
Problem solving guide Poor cleaning results Problem Possible cause and solution The dishware is not The dishware was not loaded correctly. clean. See notes under “Loading the dishwasher”. The program was not powerful enough. Select a more powerful program (see “Program overview”). - Page 88 Problem solving guide Problem Possible cause and solution The dishware is not dry The rinse aid dosage is set too low or the rinse aid or glasses and cutlery reservoir is empty. are flecked. Replenish the reservoir, increase the dosage, or change the brand of rinse aid (see “Rinse aid”...
- Page 89 Problem solving guide Problem Possible cause and solution Fill the salt reservoir (see “Reactivation salt” under “Before using for the first time”). The salt reservoir cap has not been screwed on correctly. Replace it, making sure that it screws back on correctly.
- Page 90 Problem solving guide Problem Possible cause and solution There are rust stains on The affected items are not corrosion resistant. cutlery. No remedy. Purchase cutlery which is dishwasher-safe. A program was not run after reactivation salt was added. Traces of salt have got into the normal wash cycle.
-
Page 91: Technical Service
Contact in the event of a fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Customer Service. Contact information for Miele Customer Service can be found at the end of this document. -
Page 92: Optional Accessories
These and many other useful products - Specially designed cap for accurate can be ordered directly from Miele’s and easy dispensing online store, Miele Service, or from your Reactivation salt Miele dealer. - Prevents limescale on dishware and in Detergents... - Page 93 Optional accessories Appliance care Miele cleaning and care products provide optimum care for your dishwasher. Dishwasher cleaner - For use with the Clean Machine program without detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and...
-
Page 94: Installation
A 5 ft (1.5 m) long, flexible metal extension hose (tested to 14,000 kPa / 140 bar) is available as an optional accessory from Miele dealers or Miele Customer Service. - Page 95 *INSTALLATION* Installation The dishwasher is supplied with a 3/8" Risk of damage due to excessive supply line and requires an on-site water pressure. connection with 3/8" male A brief increase in the water pressure compression fitting and an accessible can damage components of the shut-off valve.
-
Page 96: Water Drainage
*INSTALLATION* Installation Venting the water drainage Water drainage If the on-site drainage connection is The appliance drainage system has a situated lower than the guide path for non-return valve, which prevents dirty the lower basket rollers in the open water from flowing back into the door, the drainage system must be dishwasher via the drain hose. - Page 97 Customer Service Department: USA: 1-888-99-MIELE(64353) A damaged power cord must only be CDN: 1-800-565-6435 replaced with a genuine Miele cord by a Miele service technician. Specifications The dishwasher comes equipped with a Grounding instructions 4 ft (1.2 m) power cord (measured from...
- Page 98 *INSTALLATION* Installation Hardwired electrical connection Prior to making a hardwire It is possible to hardwire this appliance connection to the terminal, remove to an existing power cable. the powercord. Otherwise there will be a risk of electric shock from the ...
-
Page 99: Sound Emission Testing
Sound emission testing Prerequisites for sound emission testing Load the dishwasher with 16 standard place settings and use the Normal program. Setup for sound emission testing The dishwasher must be set up according to the following specifications. Install the dishwasher into an analyzing unit. ... - Page 100 Sound emission testing Remove the protective film from the provided insulating strip (depending on model) . Stick the insulating strip onto the front top edge of the base board .
- Page 103 Please have the model and serial number of your appliance available when contacting Customer Service. Canada Importer Miele Limited Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.ca Customer Care Centre Phone: 1-800-565-6435 customercare@miele.ca Germany Manufacturer Miele &...
- Page 104 G 7266, G 7268 en-CA M.-Nr. 12 515 570 / 03...