Page 1
Operating instructions Dishwashers To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions as well as the installation sheet before it is installed and used for the first time. en-GB HG07 M.-Nr. 12 474 850...
Contents Warning and safety instructions................Notes on the operating instructions ................. 13 Notes on the layout......................13 Scope..........................14 Guide to the appliance....................15 Appliance overview ......................15 Lower basket ........................16 Control field........................17 Display functions......................18 Caring for the environment ..................19 Before using for the first time..................
Page 3
Contents System lock ........................ 33 Deactivating the system lock.................. 33 Information ........................33 Showroom ........................33 Factory default ........................ 33 Caring for the environment ..................34 Economical dishwashing ....................34 EcoFeedback consumption indicator ................35 Heat accumulator......................36 Loading the dishwasher....................37 General information .......................
Page 4
Contact in the event of a fault ..................88 EPREL database ......................89 Warranty .......................... 89 Note for test institutes ....................89 Optional accessories....................90 Installation........................92 The Miele Waterproof system ..................92 Water inlet ........................92 Water drainage........................ 94 Electrical connection ....................95 Technical data ........................ 96...
Miele cannot be held liable for damage caused by non-compliance with these instructions. Keep the installation sheet and the operating instructions in a safe place and pass them on to any future owner.
Page 6
It is most important that this basic safety requirement is present. If in doubt, the electrical installation should be checked by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate or lack of earthing system (e.g. electric shock).
Page 7
The function and operation of the protective measures provided in the domestic electrical installation and in this Miele product must also be maintained in isolated operation or in operation that is not synchronised with the mains power supply, or these measures must be replaced by equivalent measures in the installation.
Page 8
There are live wires in the water inlet hose. Do not cut the hose, even if it is too long. The integrated Miele Waterproof system offers protection from water damage, provided that the following conditions are met: - Installation has been carried out correctly.
Page 9
1,000 kPa. A damaged dishwasher could be dangerous. If the dishwasher gets damaged, switch it off at the mains immediately and call your Miele dealer or Miele Service. While the appliance is under warranty, repairs should only be ...
Page 10
The appliance must only be operated with properly adjusted door springs. If the door cannot be adjusted properly, contact the Miele Customer Service Department. The minimum/maximum weight of the front panel is quoted in the technical data for your dishwasher on the Miele website.
Page 11
Accessories and spare parts Only use original Miele accessories. If other parts are used, warranty, performance and, if applicable, product liability claims will be invalidated. Miele will guarantee to supply functional spare parts for a ...
Page 12
Warning and safety instructions If you wish to transport the dishwasher, empty it and securely fasten all loose parts such as baskets, hoses and mains connection cables.
Notes on the operating instructions These operating instructions apply to Additional information and comments several different dishwasher models of Additional information and comments different heights. are highlighted in a box framed with a The different dishwasher models will be single black line. named as follows: normal = dishwasher measuring Instructions for the user...
Scope The appliance is supplied with: - Dishwasher - Operating instructions for operating the dishwasher - Installation sheet for installing the dishwasher - Other installation accessories for installing the dishwasher (see installation sheet) - Funnel for filling the dishwasher salt - Additional printed matter and add-ons if required...
Guide to the appliance Appliance overview a Door locking pins h Filter combination b Top spray arm i Salt reservoir c 3D MultiFlex cutlery tray j Data plate d Upper basket (depending on model) k Rinse aid reservoir e Middle spray arm l Detergent compartment f Aeration valve Lower basket (see next page)
Guide to the appliance Control field a Programme selection g OK button To select menu options and values = ECO displayed. = Auto 45–60 °C Auto To confirm messages. 45 °C = ComfortWash 45 °C h buttons = PowerWash 60 °C 60 °C for selecting “further programmes” for changing the values displayed = Intensive 75 °C 75 °C for scrolling to other menu pages...
Guide to the appliance The OK button is used to confirm Display functions messages or settings and also to move The display is used to select or set the to the next menu or another menu level. following: Under Further programmes/ - The programme settings, a scroll bar ...
Miele, free of charge. By law, you are solely responsible for deleting any personal data from the old appliance prior to disposal. You are legally obliged...
Before using for the first time If the door is opened during operation Every dishwasher is tested at the all wash functions are automatically factory. There will be residual water in interrupted. the appliance from this test. It is not an indication that the dishwasher has ...
Before using for the first time Closing the door Activating the safety lock Push the baskets right in. Use the safety lock to prevent children opening the dishwasher door. The door Raise the door upwards until the can then only be opened by using a lot catch engages.
Before using for the first time In the event of a fault, it will help the Basic settings service technician if you know the Switching on the dishwasher hardness of your local water supply. Therefore, please enter the water Switch the dishwasher on with the hardness: button.
Before using for the first time Dishwasher salt If the water in your area is very soft and constantly lower than 0.9 mmol/l In order to achieve good cleaning (5 °dH – German scale), you do not results, the dishwasher needs to need to add dishwasher salt.
Before using for the first time Filling the salt reservoir Before filling the salt reservoir for the first time, you must fill it with approx. 1.5 l of water to enable the salt to dissolve. Once the dishwasher has been commissioned, there is always sufficient water in the salt reservoir.
Before using for the first time Refilling salt After the salt reservoir has been filled, the salt refill indicator may still appear When the refill reminder Refill salt on the display if the salt concentration appears in the display, wait until the has not yet reached the correct level.
Before using for the first time Rinse aid If you only ever wish to use combination products in your Rinse aid is necessary to ensure that dishwasher, you do not need to add water does not cling and leave marks on rinse aid.
Before using for the first time Adding rinse aid Wipe up any spilled rinse aid. This prevents excess foam developing during the next programme. You can adjust the rinse aid dosage for the best wash result (see “Settings” chapter, “Rinse aid” section). Filling the rinse aid reservoir When the refill reminder ...
Settings Changing settings You can alter the dishwasher’s controls to suit changing requirements by Use the buttons to select the adjusting the settings. menu option you want to change and The settings can be altered at any confirm your selection with OK. time.
Settings Language Water hardness The display can be set to appear in one Your dishwasher is fitted with a water of several different languages. softener. You can change the language used in - You should programme the the display and also the country via the dishwasher to the correct water sub-menu.
- Decrease the rinse aid dosage. If you only ever use combination Save Extras detergent products or automatic dispensing using Miele PowerDisks (if You can set whether the selected extras available), you can switch off the refill are to remain permanently activated for reminders for dishwasher salt and rinse the respective programme.
Settings AutoOpen 2nd interim rinse In some programmes the door You can choose this function to increase automatically opens slightly to assist the cleaning performance of the the drying process. programmes with a second interim rinse. This function can be deactivated if you wish.
Settings Heat accumulator Water connection This dishwasher is equipped with a heat You can set your water connection type accumulator (see “Caring for the and control the heat accumulator environment – Heat accumulator”). functions. If you select , the Automatic Empty manually dishwasher detects which water...
Settings System lock Information The system lock prevents your You can display the following dishwasher being used without your information about your dishwasher: knowledge. - Operating hours (see also “Options – If an attempt is made to switch the Displaying the operating hours”) dishwasher on when the system lock is - Programme sequences...
Caring for the environment - You can connect the dishwasher to a Economical dishwashing hot water supply. A hot water This dishwasher is exceptionally connection is particularly suitable economical in its use of water and with energy-saving water heating electricity. sources, such as solar energy with a You can make the most of your circulation system.
Caring for the environment 2. Display consumption EcoFeedback consumption indicator At the end of the programme you can call up the actual amount of energy and The Consumption indicator function is water used by the programme that has used for calling up information about the just been run.
Caring for the environment Heat accumulator This dishwasher is equipped with a heat accumulator, in which fresh water for the programme is pre-heated and stored in order to save energy. The heat accumulator is refilled with fresh water towards the end of each programme. The water is held here ready for the next programme.
Loading the dishwasher - Make sure that small items cannot fall General information through the holders in the baskets. Remove coarse food residues from Small items such as lids should crockery. therefore be placed in the 3D There is no need to pre-rinse items MultiFlex tray or cutlery basket under running water.
Page 38
Loading the dishwasher Items not suitable for dishwashers: Damage due to caustic alkaline - Wooden cutlery and crockery or items cleaning agents. with wooden parts: these may Aluminium parts (e.g. the grease discolour and fade. The glue used in filters of cooker hoods) can be these items is not dishwasher-proof damaged by caustic alkaline cleaning...
Loading the dishwasher Loading the FlexCare cup rack Upper basket You can put cups, small bowls and flat See the “Loading the dishwasher” crockery on the FlexCare cup rack. chapter, “Loading examples” section Glasses can be arranged along the cup for examples of how to load crockery rack so they sit securely during the and cutlery.
Page 40
Loading the dishwasher Adjusting the FlexCare cup rack Filling the openings of the FlexCare cup rack You can set the height and depth of the cup rack at two different levels. so that The openings in the cup rack are it can accommodate larger cups and so specially designed to hold tall glasses that taller crockery can be placed...
Page 41
Loading the dishwasher Lowering the spikes On both front right-hand rows of spikes, you can lower every other spike to make it easier to arrange larger crockery, e.g. cereal bowls. Press the yellow lever downwards , and then lower the dark grey spikes .
Loading the dishwasher Lower the upper basket: Adjusting the upper basket In order to gain more space for taller pieces of crockery in the lower basket or upper basket, the upper basket can be adjusted on 3 levels with 2 cm between each level.
Loading the dishwasher Lowering the spikes Lower basket The rows of spikes at the front are used See the “Loading the dishwasher” for loading plates, soup bowls, platters, chapter, “Loading examples” section dessert bowls and saucers. for examples of how to load crockery Both right-hand rows of spikes can be and cutlery.
Page 44
Loading the dishwasher FlexCare Glass & Bottle Loading the glass holders The glass and bottle holders are used to The silicone elements in the glass wash stemware, tall glasses and bottles. holder provide a stable and secure hold for delicate stemware. Adjusting the FlexCare Glass & Bottle You can set the glass and bottle holders at 2 different heights.
Page 45
Loading the dishwasher Loading the FlexCare Glass & Bottle The glass and bottle holders can be used to keep tall, narrow and hollow containers, e.g. beer glasses, bottles, vases, secure during a programme. Lean the containers into the holders. Tip: For the best cleaning results, use the “BottleClean”...
Page 46
Loading the dishwasher MultiClip The MultiClips enable you to fasten light load items such as those made from plastic. Slightly lift the XL-Assist , fold it out and hook it back in the new position . Secure light items to the MultiClips. Make sure that crockery does not obstruct the middle spray arm.
Loading the dishwasher You can push the left insert to the Cutlery tray/cutlery basket middle in order to accommodate tall (depending on model) items of crockery and long stemmed glasses in the upper basket. See the “Loading the dishwasher” chapter, “Loading examples” section You can put large and long cutlery in the for examples of how to load crockery recessed centre part of the tray.
Loading the dishwasher Loading the cutlery basket (if present) Fit the insert onto the cutlery basket if required. The cutlery basket can be placed anywhere on the front rows of spikes in the left or right corner of the lower basket.
Detergent There are different types of detergent: Active ingredients - Powder and liquid gel detergents. Risk of damage due to unsuitable These detergents allow you to adjust detergents. the amount dispensed according to Detergents that are not suitable for the load size and the level of soiling.
Detergent Dispensing detergent Risk of chemical burns from detergent. The detergent compartment holds a maximum of 50 ml. Dishwasher detergents can cause burning on the skin and in the eyes, There are marks in the detergent nose, mouth and throat. compartment as a dispensing aid: 20, Avoid contact with detergents.
Detergent Adding detergent The detergent must not cause the detergent compartment lid to get stuck. This can prevent the lid from opening during the programme sequence. Do not overfill the detergent compartment. Ensure that the detergent packaging is properly closed after use. This prevents the detergent from getting damp and clumping together.
Operation Switching on the dishwasher Selecting a programme Open the stopcock, if it is closed. Choose your programme according to the type of dishes and the degree of Make sure the spray arms can rotate soiling. freely. The different programmes and their ...
Operation Display programme duration Starting the programme The estimated duration of the selected Press the Start button. programme appears on the display If necessary, confirm the previously before the programme begins. During displayed message with OK. the programme, the time left until the The programme starts.
Operation End of the programme Energy management The programme has ended when the To save energy, the dishwasher will display shows the message switch off automatically 10 minutes Finished after the last time a button is pressed or In some programmes, if the “AutoOpen” after the end of a programme.
Operation Unloading the dishwasher Cancelling or changing a programme Dishes tend to break and chip more easily when they are hot. Allow the If a programme is cancelled, dishes to cool until they are comfortable important programme stages may be enough to handle before unloading missed.
Options Activating the timer Timer Switch the dishwasher on with the You can set the start time of a button. programme. The programme start time can be delayed for between 30 minutes The Start indicator light will flash. and 24 hours. ...
Options Starting a programme before the time After you have activated the timer, all for the timer has elapsed: the displays will switch off after a few minutes to save energy. A programme can be started before the time for the timer has elapsed. Press the ...
Guide for selecting a programme Crockery Food deposits Programme features Mixed crockery including Lightly dried-on Balanced and temperature-sensitive glasses normal food deposits gentle programme and plastics All normal Variable, food deposits sensor-controlled programme Water and energy Mixed crockery saving programme Standard dried-on normal food deposits Short programme...
Page 63
Guide for selecting a programme Programme Consumption estimate Energy consumption Water consumption ComfortWash 45 °C Programme duration Energy consumption Auto Water consumption Programme duration Energy consumption Water consumption Programme duration Energy consumption Water consumption PowerWash 60 °C Programme duration Energy consumption Water consumption...
Programme overview Programme Programme sequence Pre-wash Main wash Interim rinse Final rinse Drying/ AutoOpen °C °C / Auto 45–60 °C Variable programme sequence, sensor-controlled adjustment according to load size and level of soiling 45–60 55–70 / required ComfortWash ...
Page 65
Programme overview Consumption Electrical energy Water Time Cold water Hot water Litres Cold water Hot water 15 °C 60 °C 15 °C 60 °C h:min h:min 0.54 0.29 3:50 3:40 0.65–0.95 0.55–0.65 6.0–13.0 2:02–2:59 1:59–2:49 0.85 0.45 12.5 2:38 2:28 1.00 0.65 1:26 1:15 1.25 0.85 13.5...
Programme overview immediately start the Rinse out salt Further programmes programme without load items and ComfortWash+ 55 °C without detergent dispensing. This will dissolve and remove any traces of salt Programme for cleaning a mixed load of from the wash cabinet. crockery with normal household food residues.
Extras IntenseZone Selecting extras You can select the IntenseZone extra to You can use extras to adjust the increase the cleaning performance of programmes. the programmes in the lower basket. To do this, you can select or deselect When this extra is activated, the the extras before starting the selected programme running time is extended programme.
Extras Press the Quick button. Selecting Quick The indicator light for the button will You can reduce the programme running come on if the extra is available for the time using the Quick extra. programme selected. The time by which the programme If the extra is not compatible with the running time is shortened varies selected programme, a message to this...
– Appliance care”). Follow with a clean, damp cloth. the instructions on the product Cleaning the appliance front packaging. Miele cleaning and care products are Damage due to soiling. available to order from the Miele Soiling that is left too long might...
Page 70
Cleaning and care Clean the appliance front with a soft To avoid damaging the external sponge cloth and a solution of warm surfaces, do not use the following: water and washing-up liquid. After - Cleaning agents containing soda, cleaning, wipe the surfaces dry using ammonia, acids or chlorides a soft cloth.
Cleaning and care Removing the cutlery tray (if present) Cleaning the spray arms In order to be able to remove the upper Particles of food can get stuck in the spray arm, you first have to remove the spray arm nozzles and bearings. The cutlery tray (if present).
Page 72
Cleaning and care Removing the top spray arm Removing the lower spray arm Remove the lower basket. Push the upper spray arm upwards to engage the inner ratchet. Then Rotate the screw thread of the lower unscrew the spray arm by rotating the spray arm anti-clockwise ...
Page 73
Cleaning and care Cleaning the spray arms Inserting the upper spray arm Refit the upper spray arm and tighten it by hand. Inserting the middle spray arm Use a pointed object to push food particles into the spray arm nozzles. ...
Page 74
Cleaning and care Inserting the lower spray arm Inserting the cutlery tray (if present) Refit the lower spray arm and ensure Slide the cutlery tray back onto the that the filter combination lies flat in rails from the front. the base of the wash cabinet.
Cleaning and care Checking the filters in the wash Cleaning the filters cabinet Switch the dishwasher off. The filter combination in the base of the Remove the lower spray arm (see wash cabinet retains coarse soiling from “Cleaning and care” chapter, the suds solution.
Page 76
Cleaning and care In order to clean the inside of the Rotate the screw connection filter, pull the microfilter on the plastic clockwise until the arrow in the ring downwards and away from the viewing window points to the lock filter combination.
Cleaning and care Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water inlet valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock from mains voltage.
Cleaning and care Cleaning the drain pump If water remains in the wash cabinet after the end of the programme, the water has not been pumped away. The drain pump may be blocked by foreign objects. These foreign objects are easy to remove.
Page 79
Cleaning and care Damage due to incorrect cleaning. The components are delicate and can be damaged during cleaning. Take care when cleaning the drain pump. The drain pump (see arrow) is underneath the cover. Risk of injury from glass splinters. It is especially difficult to see glass splinters in the drain pump.
You can save time and money in many cases, as you do not need to call the Miele Customer Service Department. Information to help you rectify faults yourself can be found at www.miele.com/ service. The following tables are designed to help you to find the cause of a malfunction or a fault and to resolve it.
Restart the desired programme. If the fault message appears again, there is a technical fault. Switch the dishwasher off. Close the stopcock. Call the Miele Customer Service Department. The Waterproof system has reacted. Waterproof Switch the dishwasher off.
Problem solving guide Water inlet fault Problem Cause and remedy One of the following messages appears in the display: The stopcock is closed. Open stopcock Open the stopcock fully. Before rectifying the problem: Water intake Switch the dishwasher off. The water inlet is restricted.
Problem solving guide Problem Cause and remedy Detergent residue is left The detergent compartment was still damp when in the detergent com- detergent was added. partment at the end of a Only add the detergent when the detergent programme. compartment is dry.
Page 84
Problem solving guide Problem Cause and remedy Rattling noise in the Wash items are insecure in the wash cabinet. wash cabinet Carefully open the door and rearrange the wash items so that they sit securely. There is a foreign object (e.g. glass shard) in the drain pump.
Problem solving guide Unsatisfactory washing result Problem Cause and remedy The crockery is not The crockery was not loaded correctly. clean. See notes under “Loading the dishwasher” for examples on how to load crockery and cutlery. The programme was not powerful enough. ...
Page 86
Problem solving guide Problem Cause and remedy Glassware is dull and The glassware is not dishwasher-proof. The surface discoloured. The film has altered. cannot be wiped off. No remedy. Purchase glassware that is dishwasher-proof. Tea or lipstick stains The wash temperature of the selected programme have not been com- was too low.
Page 87
Problem solving guide Problem Cause and remedy Add more dishwasher salt. Plastic items are discol- Natural dyes, e.g. from carrots, tomatoes or ketchup oured. may be the cause. The amount of detergent used or its bleaching effect was not sufficient to deal with natural dyes.
Service Information to help you rectify faults yourself and about Miele spare parts can be found at www.miele.com/ service. Contact in the event of a fault In the event of any faults which you cannot remedy yourself, please contact your Miele dealer or the Miele Customer Service Department.
Note for test institutes All relevant information for comparison testing is provided in the “Comparison tests” booklet. You can download this booklet from the Miele website. You will find the booklet under “Downloads” on the page for the relevant dishwasher model.
Miele appliances. - With glass-protection formula against These and many other products can be corrosion ordered from the Miele webshop, the Miele Customer Service Department or Rinse aid your Miele dealer. - For sparkling glasses Dishwasher detergent, rinse aid...
Page 91
Optional accessories Appliance care Miele cleaning and care products provide optimum care for your Miele dishwasher. Dishwasher cleaner - For use with the programme without Maintenance detergent dispensing - Cleans the dishwasher effectively and thoroughly - Removes grease, bacteria, and associated unpleasant odours...
(tested to 14,000 kPa/ water specification of the country in 140 bar) is available as an optional which the dishwasher is being accessory from Miele dealers or the operated. Miele Customer Service Department. Connect the dishwasher to a drinking A stopcock with a ¾" threaded union is water supply.
Page 93
*INSTALLATION* Installation Risk of damage from leaking water. The connection point is subject to mains water pressure. Water leaking from it can cause damage. You should therefore open the stopcock slowly and check for leaks. Correct the position of the seal and screw thread if appropriate.
*INSTALLATION* Installation Venting the water drain Water drainage If the on-site drainage connection is The dishwasher’s drainage system is situated lower than the guide path for fitted with a non-return valve, which the lower basket rollers in the open prevents dirty water from flowing back door, the drainage system must be into the appliance via the drain hose.
Miele product must also be The electrical installation must comply maintained in isolated operation or in with VDE 0100 requirements. operation that is not synchronised with...
Technical data Technical data Dishwasher model Normal Height of freestanding 84.5 cm appliance (adjustable by +3.5 cm) Height of built-in appliance 80.5 cm 84.5 cm (adjustable by (adjustable by +6.5 cm) +6.5 cm) Height of building-in niche Min. 80.5 cm Min. 84.5 cm (+6.5 cm) (+6.5 cm) Width 59.8 cm 59.8 cm Width of building-in niche 60 cm 60 cm...
Page 97
Technical data Dishwasher model Normal Off mode Maximum 0.50 W* Standby mode Maximum 0.50 W* Delay start Maximum 4.00 W* * see product data sheet for precise values...
Page 99
United Kingdom Miele Co. Ltd., Fairacres, Marcham Road, Abingdon, Oxon, OX14 1TW Tel: 0330 160 6600, Internet: www.miele.co.uk, E-mail: info@miele.co.uk Australia Ireland South Africa Miele Australia Pty. Ltd. Miele Ireland Ltd. Miele (Pty) Ltd. ACN 005 635 398 2024 Bianconi Avenue...
Page 100
G 7210, G 7212, G 7215, G 7217, G 7232 en-GB M.-Nr. 12 474 850 / 02...