Neutralizing Agent; Replenishing Neutralizing Agent - Miele PG 8593 Operating Instructions Manual
Laboratory glassware washer for laboratory glassware and utensils
Hide thumbs
Also See for PG 8593:
- Operating instructions manual (188 pages) ,
- Operating instructions manual (184 pages) ,
- Operating instructions manual (180 pages)
Table of Contents
Advertisement
Adding and dispensing process chemicals
Replenishing
neutralizing agent
50
Neutralizing agent
Neutralizing agent is dispensed via an external dispenser module.
Dispenser modules are installed by Miele Customer Service and can
be retrofitted at any time.
Neutralizing agent (pH setting: acidic) neutralizes any residues of
alkaline process chemicals on the surface of the load.
Neutralizing agent is dispensed automatically in the
phase after the main wash (see "Program charts"). The reservoir must
be filled and the dispensing system vented for this to occur.
In the
Inorganic
program, neutralizing agent is dispensed additionally
for an acidic pre-wash.
Place the neutralizing agent container (red marking) on the open
cabinet door or on a surface which is robust and easy to clean.
Take the lid off the canister and remove the suction wand. Place the
suction wand on the open wash cabinet door.
Replace the empty container with a full one.
Push the suction wand into the opening of the container and secure
the lid. Observe the color coding.
Feed the suction wand into the container until it reaches the
bottom.
Wipe up any spilled process chemical thoroughly.
Place the container on the floor next to the machine or in an
adjacent cabinet. The container must not be placed on top of or
above the machine. Make sure that the dispensing hose is not
kinked or trapped.
After that, the dispensing system must be primed (see "Settings /
Priming DOS").
Interim rinse
Advertisement
Table of Contents
