Table of Contents
Advertisement
Insert the tool from the accessory pack
horizontally into the gap between the door
and the lid or worktop.
Press the tool against the release
mechanism until you hear the door open.
Continue to press the tool against the
release mechanism and fully open the
door.
If the machine is switched on, the following
message is shown on the display when the
emergency release is triggered:
Emergency release: To continue, open
the door.
The message is acknowledged when the
door is closed.
Opening and closing the door
Pull-open lock
In the case of dishwashers with a pull-open
lock, the door can be opened at any time,
even during a programme sequence. In the
latter case, special caution is needed.
Open the door
Danger of scalding, burning and
chemical burns!
If the door is opened during a programme
sequence, hot water and process
chemicals can escape. The programme in
progress is also interrupted and, under
certain circumstances, even cancelled.
Only open the door when no programmes
are running.
The dishwasher control panel also serves as
a door handle.
Grasp the handle underneath the control
panel and pull the door down to open it.
Closing the door
Make sure that no objects or load items
protrude into the closing area of the door.
Risk of injury caused by crushing.
Do not put your hand inside the door as it
is closing. Risk of crushing.
Raise the door upwards until the catch
engages.
25
Advertisement
Table of Contents
