Miele PFD 401 Marine Operating Instructions Manual
Commercial dishwasher
Hide thumbs
Also See for PFD 401 Marine:
- Operating instructions manual (104 pages) ,
- Operating instructions manual (168 pages) ,
- Operating instructions manual (100 pages)
Related Manuals for Miele PFD 401 Marine
Summary of Contents for Miele PFD 401 Marine
- Page 1 Operating instructions Commercial dishwasher PFD 401 Marine en-GB To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. M.-Nr. 12 476 790...
- Page 2 Contents Notes about these instructions ....................Symbols used on the commercial dishwasher ................. Definition of terms ........................Correct use ............................ Guide to the appliance........................ Machine overview ......................... Control panel..........................10 LEDs in buttons ..........................11 Warning and Safety instructions ....................12 Warning signs and symbols attached to the dishwasher............
- Page 3 Contents Loading the dishwasher......................29 Loading the dishwasher........................ 29 We recommend ..........................30 Upper basket..........................31 Adjusting the upper basket ......................32 Lower basket ..........................33 Loading plastic trays ........................34 Cleaning agent and rinsing agent ..................... 35 Dispensing systems ........................35 Dispensing module........................
- Page 4 Contents Standby/Off............................ 58 Log book ............................59 Release programme ........................60 Set favourites ..........................60 Start screen layout ........................60 Setting favourites........................61 Programme parameters........................ 61 Selecting a programme......................61 Main wash temperature......................62 Main wash holding time ......................62 Final rinse temperature ......................
- Page 5 Contents Cancel with fault number ......................80 Door..............................81 General problems with the dishwasher ..................82 Noises ............................. 83 Unsatisfactory washing result ..................... 84 Maintenance ..........................86 Cleaning the water inlet filter....................... 86 Cleaning the drain pump and non-return valve................. 87 Programme chart .........................
- Page 6 Notes about these instructions Warnings Warnings contain information which is important for safety. They alert you to the potential danger of injury to people or damage to property. Read these warning notes carefully and observe the procedural instructions and codes of practice they describe. Notes Notes provide information of particular importance that must be observed.
- Page 7 Notes about these instructions Symbols used on the commercial dishwasher Symbol For warnings, see “Warnings and safety notes” VDE symbol EMC symbol of the VDE Do not dispose of electrical machines in household waste; they need to be disposed of separately, see “Disposal of your old machine”...
- Page 8 Correct use This Miele commercial dishwasher with its short programme running times and powerful cleaning performance is intended for commercial use. The commercial dishwasher can also be used on ships with a hull of longer than 24 metres, as well as on oil rigs.
- Page 9 Guide to the appliance Machine overview Door lock Rinsing agent container Upper basket runners Door lock latch Top machine spray arm Salt container Upper basket water connection Container for powder cleaning agents Lower machine spray arm Filter combination Lower basket runners Rear: –...
- Page 10 For starting or cancelling a programme Service interface button (door release) Testing and transmission point for the Open the door Miele Customer Service Department button (cancel or back) button (language selection) For cancelling a process in the user For selecting the display language...
- Page 11 Guide to the appliance LEDs in buttons Light-emitting diodes are incorporated in the buttons. They indicate the status of the dishwasher. Button Display Status Display The dishwasher is switched on. (Reaction to The dishwasher is switched off. On/ Off button) Pulsing The dishwasher is in standby mode.
- Page 12 Faulty components must only be replaced by genuine Miele original spare parts. Only when these parts are fitted can Miele guarantee the correct functioning and safety of the appliance. The electrical safety of this dishwasher can only be guaranteed when correctly earthed. If ...
- Page 13 The grille of dishwashers with active drying must not be blocked or sealed. Accessories Only use genuine Miele original spare parts and accessories with this dishwasher. Using spare parts or accessories from other manufacturers will invalidate the guarantee and Miele...
- Page 14 Warning and Safety instructions Only use Miele baskets and inserts with this dishwasher. Using baskets and inserts made by other manufacturers, or making modifications to Miele accessories can cause unsatisfactory cleaning results, for which Miele cannot be held liable. Any resultant damage would not be covered by the guarantee.
- Page 15 Your Miele dealer will take the packaging material away. Instead, please make use of officially designated collection and disposal points to...
- Page 16 User profiles User groups Users can be divided into two groups: - Daily operators Daily operators must be instructed on operating and loading the dishwasher and trained regularly to guarantee safe daily use. - Experienced operators Experienced operators can additionally block access to programmes and modify programme parameters.
- Page 17 User tips Operation Switching on Operation is carried out via the touch display The dishwasher needs to be connected to as well as via the buttons on the control the electricity supply. panel. Press and hold the button until the ...
- Page 18 User tips Switching off Display screens Press the button. The dishwasher remains in standby mode čeština ﺔﻴﺑﺮﻌﻟﺍ for about one minute before it switches off completely. Language dansk deutsch Standby/Off If the dishwasher has not been used for 10 minutes, it can be set to standby or All display screens shown in these operating switched off automatically.
- Page 19 User tips The displays for the system settings and for System messages system and fault messages are divided into 3 columns. Refill salt -appliance will Water be disabled shortly. Information Log book Liquid cleaning agent The symbol denotes system messages. These give information about current processes and the status of the machine.
- Page 20 Commissioning WiFi setup Installation and connection In the next step, you can connect your Before commissioning, the dishwasher must dishwasher to the WiFi network. be securely installed, and the water inlet and drain hoses and the mains cable correctly connected. Follow the instructions in Set up WiFi? “Installation”, “Water connection”...
- Page 21 Commissioning Setting the date Setting the water hardness Your local water authority can give you information about the exact water hardness in your area. 2022 With varying water hardness, always set the Set date highest level. If the water hardness ...
- Page 22 Following commissioning, the water Confirm the message with connections can be reinstated by the Miele Customer Service Department. Short Intensive Select one of the available water ...
- Page 23 Opening and closing the door Closing the door Comfort door lock Make sure that no objects or load items The door of the wash cabinet is equipped protrude into the closing area of the door. with a Comfort door locking mechanism. When the door is closed, the Comfort door ...
- Page 24 Opening and closing the door Opening the door using the emergency If the machine is switched on, the following release message is shown on the display when the emergency release is triggered: The emergency release may only be used when it is no longer possible to open the door normally, e.g.
- Page 25 Filling the container for dishwasher salt Water hardness Setting the water hardness In order to achieve excellent cleaning Water hardness can be set between 0 and results, the machine requires a supply of 12,5 mmol/l (0–70 °dH). soft water with a low calcium content. Hard The water hardness is preset to 2.5 mmol/l mains water results in the build-up of (14 °dH) ex-works.
- Page 26 Filling the container for dishwasher salt Settings table °dH °f mmol/l Display °dH °f mmol/l Display 0 0 0 0 65 6.5 1 2 1 67 6.7 2 4 2 68 6.8 3 5 3 70 7.0 4 7 4 72 7.2 5...
- Page 27 Filling the container for dishwasher salt Salt refill indicator Machine blocked if salt is not available If the level in the salt container is low and a reactivation is carried out, the following If the salt in the water softener has been message appears on the display: used up, a fault appears on the display and the machine blocked from performing...
- Page 28 Filling the container for dishwasher salt Filling the salt container Filling the salt reservoir Use only special, coarse-grained salt with a granula size of approx. 1- 4 mm. Do not under any circumstances use other types of salt such as table salt, agricultural or gritting salt.
- Page 29 Loading the dishwasher Loading the dishwasher If you need to wash large load items in the lower basket, you can remove the upper Remove coarse food residues from crockery. basket. There is no need to pre-wash items under Small items can fall through the holders in ...
- Page 30 Loading the dishwasher We recommend - When purchasing new crockery and cutlery, make sure they are dishwasher- safe if you want to wash them in the dishwasher. - Clouding may occur on glasses after frequent washing in the dishwasher. When washing delicate glasses in the dishwasher, ensure that only a special glass-care programme with very low...
- Page 31 Loading the dishwasher Cup rack Upper basket Use the upper basket for small, lightweight and delicate items such as cups, saucers, glasses, dessert bowls etc. Light, heat- resistant plastic items can also be loaded in the upper basket. Smaller shallow pots and pans can also be washed in the upper basket.
- Page 32 Loading the dishwasher Adjusting the upper basket In order to obtain more space for taller items in the lower or upper basket, the upper basket can be adjusted between two positions that are approx. 5 cm apart. Pull out the upper basket. ...
- Page 33 Loading the dishwasher Lower basket Place larger and heavier load items such as plates, serving platters, pots, bowls, etc. in the lower basket. Only place thin, delicate glasses in a suitable insert or lower basket. Always arrange plates with the top side facing inwards, as shown in the pictures, to achieve the best cleaning result.
- Page 34 For further information on baskets, please contact your Miele dealer or the Miele Customer Service Department. Examples: (lower baskets) Push all four extenders into the base ...
- Page 35 Specific types of soiling may require manufacturers when handling process different combinations of cleaning agents chemicals and take all the protective and additives. The Miele Customer Service measures stipulated by the process Department will be able to advise you. chemical manufacturers.
- Page 36 Depending on the model, liquid cleaning agent is dispensed either via an internal dispensing pump or via an external dispensing module. Dispensing modules are connected by the Miele Customer Service Department and can be retrofitted at any time. Replacing the canister Place the liquid cleaning agent container ...
- Page 37 Dispensing liquid cleaning agent amount. The dispensing concentration is set by the Dispensing example: Miele Customer Service Department. Approx. 8,5 litres of water are taken into the machine for the main wash. With a cleaning agent concentration of approx. 3 g/l, you will need approx. 25 g of cleaning agent.
- Page 38 Cleaning agent and rinsing agent Tips for the Super Short programme (depending on the model) With the programme, the final Super Short rinse water is not pumped away at the end of the programme in order to achieve short programme running times in continuous use. Cleaning agent cannot be rinsed out of the dispenser during the short programme time.
- Page 39 Cleaning agent and rinsing agent Replacing the canister Rinsing agent Place the rinsing agent container (note the Rinsing agent is necessary to ensure water colour marking) on the open wash cabinet does not cling and leave marks on load door or on a surface which is robust and items, and to help load items dry faster after easy to clean.
- Page 40 Cleaning agent and rinsing agent Refill indicator When the fill level in the rinsing agent container is low, you are reminded to change the canister, e.g.: Change rinse aid canister. Empty status Information detected. Only add rinsing agent as far as the “max.” ...
- Page 41 - If clouding or smearing appears on load items, the dispensing concentration is set too high. In either case contact the Miele Customer Service Department and have the dispensing concentration reset.
- Page 42 Operation Switching on Selecting a programme Open the stopcock if it is closed. Choose your programme according to the type of load items and the degree of soiling. The dishwasher needs to be connected to As soon as you have selected a programme, the electricity supply.
- Page 43 Operation Programme list Starting a programme Programmes which cannot be selected Press the Start/Stop button (the LED of directly on the display can be selected from the Start/Stop button will light up). the programme list. Starting the programme using a timer Press the ...
- Page 44 Operation Deleting the timer Press the Start/Stop button. Current time 09:32 Start at 12:30 --:-- Start programme Finish at Delete timer immediately A summary follows, which you must confirm by pressing You can either delete the timer setting Universal ) or delete the timer and start Delete timer the programme immediately (...
- Page 45 Operation End of a programme Interrupting a programme After a programme has ended normally, the A programme which is already running LED of the Start/Stop button will go out and should only be interrupted if strictly the following will appear on the display. necessary, e.g.
- Page 46 Operation You will initially be asked whether you really The following will appear on the display: want to open the door. Cancel programme? Open door? Select and confirm your choice with Select to interrupt the programme and the OK button. ...
- Page 47 Machine functions The menu includes Dispensing systems Machine functions relevant functions to support daily routine The dispensing systems for liquid media can tasks. only dispense reliably if the dispensing The factory settings are indicated by a system has been purged of air and contains tick .
- Page 48 Machine functions Rinsing dispensing paths Cleaning ag. A dispensing system must be rinsed in the canister following situations: - If a dispensing system was accidentally Fill disp. paths Rinse aid filled with the wrong medium. canister - If deposits have formed in the dispensing paths or in the containers, which could Clean.
- Page 49 Machine functions The menu is saved under the following input path. Further choices Machine functions Dispensing systems Rinse dispensing paths *) Only activated dispensing systems are displayed Cleaning ag. canister Rinse disp. Rinse aid paths canister Clean.
- Page 50 Settings Basic parameters for machine control are °F stored in the menu. Settings The factory settings are indicated by a tick . A description of how to configure settings is provided after the overview. Menu structure Further choices ...
- Page 51 Settings Set the time of day Time of day To set the format for the time of day: The time of day is required for the display and the delay start, for example. The date The menu is saved under the following input format and the current time of day have to path.
- Page 52 Settings Set the date Date The menu is saved under the following input The date format and the current date have to path. be set. Further choices Select the date format The menu is saved under the following input ...
- Page 53 Settings Display brightness Volume You can also set the brightness of the An acoustic signal transmitter is integrated display. in the control panel, which can provide acoustic feedback in the following The menu is saved under the following input situations: path.
- Page 54 Settings Button reaction Welcome tone The button fields on the display can be There is a brief melody when the machine is configured to have a delayed reaction and to switched on and off. You can use this option only react when the button field is pressed to switch this melody off and back on again.
- Page 55 Settings Temperature unit The temperature can be shown on the display in °C (degrees Celsius) or °F (degrees Fahrenheit). The menu is saved under the following input path. Further choices Settings Temperature unit °C °F Temp. unit °C Temperature display in Celsius.
- Page 56 Further settings The menu incorporates all Further settings Release programmes administrative processes and settings. All programmes Access to the menu is Further settings protected by a PIN code. Selection You must enter the correct PIN code to open the menu.
- Page 57 Further settings Rinse aid canister Dealer Dispens. concentration Demo mode Deactivate Cycles until empty Water hardness Software version ) 2.5 mmol/l 14° dh 1-SBAE ID XXXX Cycles bef. reactivation ...
- Page 58 Further settings Filter programme lock Standby/Off The filter combination in the wash cabinet If the dishwasher has not been used for filters coarse dirt particles out of the wash 10 minutes, it can be set to standby or water. If dirt particles enter the circulation switched off automatically.
- Page 59 The display can be broken down by programme. Service interval Reminder about the next service. The date of the next service is entered by the Miele Customer Service Department. Scroll to the option you want using the and arrow buttons and select it by...
- Page 60 Further settings Release programme selected. Other favourites can be added or removed. It is possible to select a There is an option to block individual programme multiple times. It is displayed on programmes. Blocked programmes are no the start screen the same number of times. longer available in the programme selection screen.
- Page 61 Extended settings modify programme parameters and this Set favourites should therefore be undertaken only by experienced users or by the Miele Customer Service Department. Short Intensive Start by selecting the programme you ...
- Page 62 Further settings Main wash temperature Final rinse temperature The main wash temperature is reached by The final rinse temperature is reached by heating up the wash water. The temperature heating up the wash water. The temperature needs to be adjusted to the task. needs to be adjusted to the task.
- Page 63 Further settings Increased water level Interim rinse It is then advisable to increase the water If required, an additional intermediate wash level when a lot of water is absorbed due to block can be activated for selected the structure of the load items or when the programmes.
- Page 64 Further settings Door dispenser Dispensing systems The following menu allows you to activate, Cleaning agent door fill and rinse dispensing systems, to change their names if required and to set the This selection is only available if the dispensing concentration for all corresponding dispensing system is programmes.
- Page 65 Further settings Activating dispensing from the canister Rinse aid door Dispensing from the door dispensers is This selection is only available if the preset ex-works. corresponding dispensing system is For DOS dishwashers, integrated liquid present (depending on the model). dispensing is preset.
- Page 66 Further settings Deactivating dispensing from the canister Dispensing concentration You can subsequently switch dispensing The dispensing concentration for liquid from the canisters to the door dispensers or process chemicals is set in the same way for deactivate it completely. all dispensing systems. The setting applies to all programmes.
- Page 67 Further settings Cycles until empty Water hardness This function is only available on machines The water hardness setting is described in with fill level detection. “Filling the salt container”. When dispensing liquid process chemicals Reactivation notification from external canisters, the fill level in the In order to plan wash phases more canister is monitored.
- Page 68 The menu is saved under the following input If a PIN code is lost, a new code must path. be issued by the Miele Customer Service Department. Further choices Entering the PIN code Extended settings ...
- Page 69 The menu is saved under the following input If a PIN code is lost, a new code must be path. issued by the Miele Customer Service Department. Further choices Assign a new PIN code by selecting the ...
- Page 70 WiFi module. You can connect your dishwasher to your Which connection method do you local network in order to use digital solutions want to use? from Miele. An overview of these digital solutions is available on the webpage: Soft AP https://www.miele.co.uk/p/...
- Page 71 Further settings Soft AP If Connection via WPS is not possible, you Deactivate can connect the dishwasher to your local network Via Soft AP. Network/WiFi A Soft-AP (Software-enabled Access Point) Connection status is a wireless access point provided by your dishwasher that can be used by other Deactivate wireless machines in the vicinity.
- Page 72 Further settings RemoteUpdate Showroom programme This menu option only appears if the For demonstration purposes only. dishwasher has been integrated into the The dishwasher is equipped with a demo WiFi network. mode for showroom use. When a new version of the dishwasher The menu is saved under the following input control system is available, you can decide path.
- Page 73 Further settings Factory defaults Selecting resets the programme settings or all settings, depending on the If necessary, the modified programme option chosen. parameters or all dishwasher parameters can be reset to the factory default settings. If you do not want to reset, select ...
- Page 74 Miele Customer Service Department. Remove any soiling from the control panel and from the machine front straight away This maintenance will cover the following: where possible.
- Page 75 To help prevent re-soiling (fingerprints, etc.), cleaner (available from Miele). a suitable stainless steel care product can be used after cleaning. Cleaning the door and the door seal ...
- Page 76 Cleaning and care Cleaning the flat and micro-fine filters Cleaning filters in the wash cabinet Remove the coarse filter as described The filter combination in the base of the before. wash cabinet retains coarse soiling from the suds solution. It prevents soiling from entering the circulation system and causing blockages in the spray arms.
- Page 77 Cleaning and care Cleaning the spray arms The dishwasher has three different spray arms. Particles of food can get stuck in the spray arm nozzles and bearings. The spray arms should therefore be checked and cleaned regularly. Switch the dishwasher off. ...
- Page 78 With the aid of the following guide, most minor problems that can occur during daily operation can be corrected without contacting Miele. You can save time and money in many cases, as you do not need to call the Miele Customer Service Department.
- Page 79 Troubleshooting Faults with water inlet or drainage Problem Cause and remedy One of the following fault Before rectifying the problem: messages or notifications Switch the dishwasher off with the button. appears on the display: Water inlet fault. F404 Water inlet, cold too low: check water inlet.
- Page 80 The flow pressure at the water connection is too low (see “Technical data”). Contact the Miele Customer Service Department for advice. Water inlet fault. Fault F 413–414 If the flow pressure is too high, one of these fault numbers will appear on the display and the programme will be cancelled.
- Page 81 Close the door and try to open it again using the button. If it is still blocked: Contact the Miele Customer Service Department. This is not a fault! Anti-trap guard: To continue, The door is locked while the door locking mechanism open door.
- Page 82 Troubleshooting General problems with the dishwasher Problem Cause and remedy This is not a fault! Programme completed suc- has appeared on cessfully Open and close the door. the display and you cannot The dishwasher must be switched on for this. select or start a pro- gramme.
- Page 83 Troubleshooting Problem Cause and remedy Water remains in the wash Before rectifying the problem: cabinet at the end of a pro- Switch the dishwasher off with the button. gramme. The filter combination in the wash cabinet is clogged. (This does not apply to the Clean the filter combination (see “Cleaning and care”).
- Page 84 Troubleshooting Unsatisfactory washing result Problem Cause and remedy The crockery is not clean. The crockery was not loaded correctly. Please observe the instructions in “Loading the dishwasher”. The programme was not suitable for the load. Select a suitable programme (see “Programme chart”). ...
- Page 85 Troubleshooting Problem Cause and remedy White residue is visible on The rinsing agent dosage is set too low. crockery and cutlery, cloud- Increase the dosage (see “Further settings, Additional ing occurs on glassware; functions, Dispensing system”). film can be wiped off. There is no salt in the salt reservoir.
- Page 86 Maintenance Cleaning the water inlet filter A filter is incorporated in the screw thread to protect the water intake valve. If the filter is soiled, insufficient water flows into the wash cabinet. Risk of electric shock from mains voltage. The plastic housing of the water connection contains an electrical valve.
- Page 87 Maintenance Cleaning the drain pump and non- Check for foreign objects blocking the drain pump before replacing the non- return valve return valve. If the water has not been pumped away at Carefully replace the non-return valve and the end of a wash programme (excluding the secure it with the locking clamp.
- Page 88 Programme chart Programme Application Cleaning agent (if liquid cleaning agent is not dispensed) The following dosages are based on Miele detergents. Please follow the manufacturer's instructions. “Quick programme” for lightly soiled load items with fresh, easily 20–25 g removed food residues.
- Page 89 Programme chart Programme sequence Pre-wash Pre-wash Main wash Interim Interim Final rinse (1)/(2) rinse rinse (1)/(2) 55 °C 60 °C 1 min 1 min 55 °C 60 °C 2 min 1 min 65 °C 60 °C 3 min 1 min 60 °C 55 °C 2 min 1 min 50 °C – (3) 1 min 1 min 70 °C 60 °C 10 min 1 min 50 °C 50 °C...
- Page 90 - Your Miele dealer - The Miele Customer Service Department Contact details for Miele are provided at the back of these operating instructions. When contacting the Customer Service Department, you will need the model number and 8-digit machine number of the dishwasher.
- Page 91 *INSTALLATION* Installation Installation Built-under installation Damage caused by condensation. Risk of the machine tipping. In order to reduce the risk of damage from To ensure stability, a built-under condensation, the furniture in the area dishwasher must only be installed around the dishwasher should be beneath a continuous worktop that is designed for commercial use.
- Page 92 *INSTALLATION* Installation Adjustable plinth panel Removing the machine lid (depending on the model) If the dishwasher is fitted with a lid, it can be removed as follows: Dishwashers with internal dispensing or active drying have an adjustable plinth panel. Remove both securing screws on the back ...
- Page 93 *INSTALLATION* Installation Levelling and securing the Depending on the built-under installation situation, the cover foil supplied in the scope dishwasher of delivery can be attached to the lower To guarantee stability, the dishwasher must edge of the worktop. The cover foil protects be secured to the worktop after levelling.
- Page 94 *INSTALLATION* Installation Moving the dishwasher Before moving the dishwasher, screw in the adjustable feet fully so that they do not get damaged. Component damage caused by carrying. Do not lift the dishwasher by any protruding components, e.g. the control panel.
- Page 95 Ask a qualified specialist to complete the energy management system. For this electrical connection work. purpose, the dishwasher must be technically adapted and the controls reset by the Miele - The electrical installation must be in Customer Service Department. compliance with current local and national safety regulations (DIN VDE 0100 in...
- Page 96 1000 kPa (overpressure). If the water pressure does not lie in the 200– 1000 kPa range, contact the Miele Customer Service Department for advice. - The dishwasher is supplied as standard for connection to cold water (blue coded hose) and hot water up to max.
- Page 97 *INSTALLATION* Plumbing Connecting the drain hose - The dishwasher drainage system is fitted with a non-return valve, which prevents dirty water from flowing back into the dishwasher via the drain hose. - The dishwasher drain hose should be connected to a separate on-site drainage system for the dishwasher only.
- Page 98 marking UKCA mark (UK only) The Supply of Machinery (Safety) Regulations 2008 Manufacturer address Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany 2.000 * If installation site is above m, the boiling point of the wash water will be lower. For this reason, the programme...
- Page 99 Technical data This Statement of Compliance confirms this Miele product fully complies with the Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. 1) Professional Appliance – PFD 400, PFD 401, PFD 402, PFD 404, PFD 405 (GG12) 2) Manufactured by: Miele &...
- Page 100 Tel: (01) 461 07 10, Fax: (01) 461 07 97 E-Mail: info@miele.ae E-Mail: info@miele.ie, Internet: www.miele.ie Website: www.miele.ae Manufacturer: Miele & Cie. KG, Carl-Miele-Straße 29, 33332 Gütersloh, Germany Alteration rights reserved / Publication date: 2024-04-19 M.-Nr. 12 476 790 / 01...