Cleaning And Maintenance Of The Dispensing System - Miele PW 6163 Operating And Installation Instructions
Commercial washing machine
Hide thumbs
Also See for PW 6163:
- Operating instructions manual (46 pages) ,
- Operating and installation instructions (84 pages)
Table of Contents
Advertisement
Optional modules (depending on country)
Useful tip: The dispensing amount can be set from 0 to 9999 ml in
1 ml increments.
0/1
Press the
multifunction button.
The dispensing hose will fill up.
Stop the process by pressing the
Run the hose of the dispenser pump upwards into a measuring
vessel.
Hold the entire measuring vessel above the dispenser pump while
doing this.
Irritant detergents!
Skin and eye irritation.
Avoid contact with skin and eyes, wear protective clothing.
Return to the main menu by pressing "Back".
Dispenser calibration
Dispenser pump 1
Dispenser pump 2
Select a dispenser pump.
Dispenser calibration
V:
100 ml
0/1
Press the
multifunction button.
Stop the pump by pressing the
automatically after 60 seconds.
Measure the amount dispensed into the measuring vessel.
Dispenser calibration
V:
100 ml
Enter the amount measured in the
The throughput
P
is calculated in
Press the "Save" button.
The measured value is assigned to the pump.
Reattach the hose.
0/1
Main menu
Dispenser pump 1
t:
0
s
P:
No
0/1
0/1
button, or the pump will stop
Dispenser pump 1
t:
s
200,0 ml min
30
P:
0/1
V:
field.
ml/min
button.
/
by the controls.
51
Advertisement
Table of Contents
