Installation - Flush-Fit - Miele SmartLine Operating And Installation Instructions
Downdraft extractor
Hide thumbs
Also See for SmartLine:
- Operating and installation instructions (84 pages) ,
- Operating and installation instructions (72 pages)
Table of Contents
Advertisement
Installation – flush-fit
If the worktop is more than 28 mm
deep, it must be cut out underneath
on the building-in side on the right or
left hand side.
a Worktop
b Maximum 24 mm
c 12 mm
Securing the brackets
1 bracket (supplied with the spacer bar)
must be secured centrally to the right or
left-hand side of the cutout.
Wooden worktops
Fit the bracket so that it sits flush
with the top edge of the lower step of
the stepped cutout.
Secure the bracket with the
3.5 x 25 mm wood screws supplied.
Natural stone worktops
You will need heavy-duty double-
sided tape (not supplied) to secure the
bracket.
Stick the tape onto the upper edge of
the lower step of the stepped cutout.
Fit the bracket so that it sits flush
with the top edge of the lower step of
the stepped cutout.
Press the bracket firmly into position.
Installation
69
Advertisement
Table of Contents
