Power Management - Miele DA 2690 Operating And Installation Instructions
Hide thumbs
Also See for DA 2690:
- Operating and installation instructions (56 pages) ,
- Operating and installation instructions (52 pages)
Table of Contents
Advertisement
Operation (Manual mode)
Power management
The ventilation hood features a power
management system to help save
energy. The fan power level is reduced
and the lighting is turned off
automatically.
– If the intensive setting is selected, the
fan automatically switches to level 3
after 5 minutes.
– If the fan is set to level 3, 2 or 1, it
switches back one fan setting after 2
hours and then in 30-minute intervals
until the fan eventually switches off.
– If the overhead lighting is on, it
automatically turns off after 12 hours.
Turning power management On/Off
You can deactivate the power
management.
This can result in increased electricity
consumption.
Turn off the fan and the lighting.
Press and hold the Delayed shut
down button 5 15 for approx. 10
seconds until 1 appears in the fan
level display.
Then, press the following buttons in
order:
– The lighting button ,
– Followed by the "" button and then
– The lighting button again.
If power management is turned on, the
1 and IS indicators will be continuously
lit.
If it is turned off, 1 and IS will flash.
Press the "" button to turn power
management off.
22
The 1 and IS indicators will flash.
To turn it on, press the "" button.
The 1 and IS indicators are constantly
lit.
Confirm the setting by pressing the
Delayed shut down button 5 15.
All the indicator lights go out.
If the new setting is not confirmed
within 4 minutes, the hood reverts to
the previous setting.
Advertisement
Table of Contents
