a Extraction, recirculation with
conversion kit DUU 150.
b The wall unit housing needs to be
38 mm shorter than the wall unit
door.
c Installation is also possible in a
600 mm wide cabinet. The following
should be noted:
– The adjoining units must also be
shortened by 38 mm.
– The doors of the housing unit and
of adjoining units must open
upwards so that the grease filters
are accessible.
d The ducting can also be connected
at the back.
e The wall unit can be fitted with a
partition after installation. Slots for
the grease filters, and with
recirculation mode for the charcoal
filters, must remain accessible.
f Alternatively, the wall unit can be
fitted with side sections.
The height of the wall unit and cut-out
dimensions must take account of any
accessories fitted (e.g. silencer, DSM
module).
Installation
47