Signing Off The Remote Control - Miele DA 3668 Operating And Installation Instructions
Hide thumbs
Also See for DA 3668:
- Operating and installation instructions (65 pages) ,
- Operating and installation instructions (72 pages) ,
- Operating and installation instructions (60 pages)
Table of Contents
Advertisement
Before using for the first time
Signing off the remote control
Press the run-on control on the
rangehood for approx. 10 seconds
until 1 lights up.
Then press in turn:
- the control,
- then the control,
- then the lighting control ,
- then the control to sign off.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 will start
flashing on and off.
Confirm the signing off procedure on
the rangehood by pressing the
run-on control. All the indicator lights
will go out.
Press the and controls on the
remote control at the same time for
about 5 seconds until the LED on the
remote control starts flashing.
Then press in turn:
- the lighting control ,
- then the control to sign off.
The remote control LED will flash
steadily.
After approx. 10 seconds, the remote
control LED flashes on and off twice
with a longer gap between the flashes.
The LED will go out after a short while.
The remote control is signed off.
28
Signing on the remote control
A Wi-Fi connection and the remote
control cannot be used
simultaneously.
Sign off any existing Wi-Fi connection
(see "Signing off Wi-Fi").
To sign on, press the run-on
control on the rangehood for
approx. 10 seconds until 1 lights up.
Then press in turn:
- the control,
- then the control,
- then the lighting control ,
- then press the control to sign on.
2 will light up constantly, 3 will flash on
and off.
After a few seconds 2 and 3 with light
up constantly, B will flash on and off.
Press the and controls on the
remote control at the same time for
about 5 seconds until the LED on the
remote control starts flashing.
Then press in turn:
- the lighting control ,
- then the control to sign on.
The search for a wireless connection
will start. The remote control LED will
flash steadily.
After approx. 30 seconds, the remote
control LED flashes on and off four
times with short intervals between the
flashes. The LED will go out after a
short while.
Hide quick links:
Advertisement
Table of Contents
