Page 1
Operating instructions for washing machines To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en-AE, SA M.-Nr. 11 311 830...
Protective foil and stickers removal ..............18 Miele@home ......................19 1. Set the language ....................20 2. Setting up Miele@home ..................20 3. Set clock format ....................21 4. Remove the transit bars ..................21 5. Commissioning TwinDos ................... 22 6.
Page 3
SmartStart ......................63 Detergent ...................... 64 The correct detergent.................... 64 Water softeners ..................... 64 Dispensing aids ..................... 64 Fabric conditioner and liquid starch ..............64 Recommended Miele detergents ................66 Recommended detergents in accordance with Directive (EU) Nr. 1015/2010..67...
Page 4
Contents Cleaning and care .................... 68 Cleaning the external casing and the control panel ..........68 Cleaning the detergent dispenser drawer ............. 68 Cleaning the drum (Hygiene info) ................70 TwinDos maintenance ................... 70 Cleaning the water inlet filter ................. 71 Problem solving guide ..................
Please dispose of it at your local community waste collection / recycling centre or contact your Miele dealer for advice. Ensure that it presents no danger to children while being stored for disposal.
It must be used only as a domestic appliance to wash items which are specified by the manufacturer as being washable on the wash care label. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
Page 8
Warning and Safety instructions The washing machine can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it safely and recognise and understand the consequences of incorrect operation.
Page 9
It is essential that this standard safety requirement is met. If in any doubt, please have the wiring system of the building tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). ...
Page 10
This special lamp must only be used for the purpose it is intended for. It is not suitable for room lighting. Replacement lamps may only be fitted by a Miele authorised person or your Miele dealer.
Page 11
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Page 12
If, however, you do wish to descale it, only use a proprietary natural citric acid based descaling agent. Miele recommends using Miele descaling agent which is available to order from your Miele dealer. Strictly observe the instructions on the packaging. ...
Page 13
A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a Sensor To go back a level in a menu. b Touch display c Start/Stop sensor control Touching the Start/Stop sensor control starts the selected programme or cancels a programme that has already been started. The programme can be started as soon as the sensor control is flashing on and off.
Values set MobileStart previously are not saved. MobileStart enables you to operate your 11:02 washing machine remotely with the Miele@mobile app. Remote control setting must be switched on. Programmes Favourites...
Operating the washing machine Extras menu (multiple selection) Examples on how to operate the machine Extras 11:02 Option lists Quick Water plus Programmes menu (single selection) 11:02 Programmes Extra rinse Cottons Minimum iron ...
Page 17
Operating the washing machine Setting numerical values Pull-down menu You can set numerical values in some The pull-down menu can be used to menus. display information, e.g. about a wash programme. Clock display Overview 11:02 Temperature Spin speed ...
Before using for the first time Remove the detergent Damage resulting from incorrect cartridges and the drain hose installation and connection. elbow from the drum Installing and connecting the washing machine incorrectly will Two detergent cartridges for automatic cause serious property damage. detergent dispensing and an elbow See “Installation”.
– a WiFi network Therefore, the availability of featured – the Miele@mobile App functions cannot be guaranteed. – a Miele user account. The user Miele@home availability account can be created via the The ability to use the Miele@mobile app Miele@mobile App.
6 steps of the initial commissioning process. Skip Continue 1. Set the language To set up Miele@home now: Touch You will be asked to select the language Continue sensor control. you require for the display. It is possible Tip: To postpone setup until later:...
Before using for the first time 3. Set clock format 4. Remove the transit bars The time of day can be displayed in 12- Damage resulting from failure to hour or 24-hour clock format. remove the transit bars. Select the clock format you want and Failure to remove the transit bars can confirm this with the sensor...
sensor control. Confirm the preset value with the sensor control, or change the Settings for compartment value. The procedure for Miele UltraPhase 1 UltraPhase 1 and Miele UltraPhase 2 is described below. The procedure for other Hardness level I 46 ml...
Page 23
Before using for the first time Remove the foil from the detergent Push the UltraPhase 1 detergent cartridge. cartridge into compartment 1 until it locks into position. The following message appears in the display: Now enter the settings for UltraPhase 2 ...
Page 24
Before using for the first time Settings for compartment The dispensing quantity for UltraPhase 2 is preset for (hardness level II). Dosage for comp. 11:02 Push the UltraPhase 2 detergent cartridge into compartment 2 until it Confirm the preset value with the locks into position.
Before using for the first time 6. Start the calibration programme For optimum water and energy consumption and excellent wash results, it is important to calibrate the washing machine. To do this, the Cottons programme must be run without laundry. No other programmes can be started until calibration has been carried out.
– Washing at low temperatures and/or using liquid detergents can cause bacteria and odours to build up in the washing machine. Miele therefore recommends cleaning the washing machine once every month. The washing machine reminds you to...
Washing environmentally and economically 2. Actual consumption EcoFeedback You can view information about the You can view the actual amount of energy and water consumption of your energy and water used by a washing machine with the pull-down programme both during and at the menu.
1. Prepare the laundry Tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Damage due to solvent-based cleaning agents Cleaning agents containing benzine, stain remover, etc., can damage...
2. Select a programme Switching on the washing Selecting a programme machine Touch the Programmes sensor. Press the control. 11:02 Programmes The interior drum lighting will come on. Cottons Minimum iron 2:39 1:59 The drum lighting will go out automatically after 5 minutes.
3. Select programme settings 2. Select the detergent Selecting a temperature When using Miele's 2-phase system You can alter the preset temperature you must set the colour of the laundry. of a wash programme. Select Whites for loads of white items,...
Page 31
3. Select programme settings Selecting Extras Selecting stains You can supplement the wash In order to clean stained laundry more programmes with Extras. effectively, you can choose from a list of various types of stains. The wash Touch the sensor control.
4. Load the washing machine Open the door Close the door Take hold of the door and pull it Make sure that no items are caught open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
UltraPhase 1 and UltraPhase 2 clean white and coloured fabrics thoroughly. UltraPhase 1 and UltraPhase 2 single-use cartridges are available to order from your Miele dealer. Press the yellow button above the cartridge to release the lock. Activating TwinDos dispensing ...
Page 34
5. Add detergent Level of soiling Using other methods to remove stains The level of soiling in laundry is split into three settings: If you wish to use additional methods of stain removal, you have the following – Light options: No visible soiling or stains –...
5. Add detergent Adding detergent Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used. Please observe the instructions for use and dosage on the detergent packaging. Ensure that TwinDos dispensing is deactivated. Add detergent in accordance with the value in the pull-down dosage display.
Page 36
5. Add detergent Adding fabric conditioner Tips on dosing Adjust the detergent dosage to the level of soiling of the laundry and the size of the load. Reduce the amount of detergent with smaller loads (e.g. reduce the amount of detergent by ⅓ when washing a half load).
Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Capsules pose a health risk.
Page 38
5. Add detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. Do not add any additional fabric conditioner to the compartment. Remove the empty capsule at the end of the programme.
6. Starting the programme Starting the programme Adding laundry during a programme sequence The programme can be started when the Start/Stop sensor control is flashing Laundry can be added or removed at on and off. any time. Touch the Start/Stop sensor control. ...
7. End of programme End of programme The door remains locked during the anti-crease phase and Finish/Anti-crease Unlock with "Start/Stop" appear in the display. Touch the Start/Stop sensor control. The door will unlock. The drum lighting will come on. Tip: The door unlocks automatically at the end of the anti-crease phase.
Spinning Final spin speed in the Programme programme Cottons 1600 When a programme is selected, the Cottons 1400 optimum spin speed for this wash Minimum iron 1200 programme is shown in the display. Delicates A faster spin speed can be selected for QuickPowerWash 1600 certain wash programmes.
Spinning Omitting the final spin (Rinse Interim spin hold) There is a spin cycle after the main wash and between the rinses. A Select the Extra. Rinse hold reduction in the final spin speed will If Rinse hold is selected, the laundry also reduce the interim spin speed as remains in the water following the final appropriate.
Programme chart Cottons Cold to 90 °C Max. load 9,0 kg Items Cotton, linen or mixed fibre fabric, e.g. table linen, towelling, underwear, T-shirts, etc. – The Cottons 60 °C/40 °C programme has a shorter programme duration, longer temperature holding times and higher energy consumption than the Cottons / programme. –...
Page 44
Programme chart QuickPowerWash 60 °C – 40 °C Max. load 4,0 kg Items Lightly to moderately soiled garments which are also suitable for washing in the Cottons programme A special saturation process and wash rhythm ensure that the laundry is cleaned particularly quickly and thoroughly. Automatic plus Cold to 40 °C Max.
Page 45
Programme chart Shirts Cold to 60 °C Max. load 1.0 kg/2.0 kg Items Shirts and blouses made of cotton and mixed fibre – Pre-treat collars and cuffs depending on the level of soiling. – Wash silk shirts and blouses in the Silks programme. – If the preset Pre-ironing Extra is switched off, the maximum load capacity is increased to 2.0 kg.
Page 46
Programme chart Trainers Cold to 40 °C Max. 2 pairs of shoes Items Sport shoes only (not leather shoes) – Follow the instructions on the care label. – Coarse soiling should be brushed off first before washing. – Close Velcro fasteners. –...
Page 47
Programme chart Down filled items Cold to 60 °C Max. load 2.0 kg Items Jackets, sleeping bags, pillows and other items with down filling – Remove air from the laundry before washing to prevent an excessive build-up of foam. To do this either push the items into a narrow laundry bag to compress them or tie them together with a washable strap.
Page 48
Programme chart Curtains Cold to 40 °C Max. load 2.0 kg Items Curtains specified as machine-washable by the manufacturer – To remove dust, the Pre-wash Extra is selected automatically. – For curtains which crease easily, reduce the spin speed or deselect the spin. –...
Page 49
Programme chart Freshen up Max. load 1.0 kg Items Dry and clean cotton, linen or mixed fibre garments which are slightly creased. The garments must be suitable for drying in a tumble dryer and suitable for ironing . – Smaller loads give a better result. –...
Page 50
Cleaning the washing machine will significantly reduce bacteria, mould and biofilm, as well as prevent the build-up of unpleasant odours. – Optimum results can be achieved by using Miele’s IntenseClean washing machine cleaner. Alternatively, a universal powder detergent can be used.
Garment care label symbols Drying Washing The number of dots indicates the The figure quoted in the bucket is the drying temperature maximum temperature the garment can be washed at. The number of Normal temperature bars under the symbol indicates the ...
Extra options You can use the extra options buttons SingleWash to augment the wash programmes. For efficiently washing a very small load (< 1 kg) in a normal wash programme. Quick The wash duration is reduced. The programme duration is reduced. Please note the following advice: Mechanical action and energy usage are increased.
Extra options Soak Extra quiet For heavily soiled and stained items This option reduces noise levels during with protein stains. the wash programme. Use this if you want to wash during quiet periods (for A duration of between 30 minutes and instance when children are sleeping).
Page 57
Programme sequence Special features in the = low water level programme sequence = medium water level Anti-crease: = high water level At the end of the programme the drum = intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
Page 58
PowerWash end of the drenching phase. If PowerWash is a washing technique necessary, the washing machine will developed by Miele. It is activated in pump water away or take in a little the following programmes: more fresh water. – Cottons (with small and medium load –...
Changing the programme sequence Cancelling a programme Changing a programme (safety lock) You can cancel a wash programme at any time after it has started. A programme, temperature, spin speed or selected option cannot be changed Touch the Start/Stop sensor. once the machine has been The following will appear in the display: successfully started.
Favourite programmes Creating favourites To enter a name You can save your own customised It is best to select short, memorable wash programmes under names of your names. choice. Touch the letters or characters you want. Option 1 Confirm with the Save sensor.
Washing assistant The wash assistant helps you with Tip: You can add individual programme loads consisting of items with different settings, e.g. Extras, before you start care instructions. The washing machine the programme. will use the list of items to put together a suitable wash programme.
Timer The Timer can be used to set the time Deleting the timer you wish a programme to finish or start The selected time for the timer can be at. The programme start can be delayed changed before the programme starts. by up to 24 hours.
Timer Setting the timeframe SmartStart If you have activated the SmartGrid The SmartStart function lets you function in Settings, SmartStart by define a period of time during which will appear in the display SmartFinish by your washing machine will start instead of Start at Finish at...
Detergent The correct detergent Dispensing aids All detergents produced for automatic Use dispensing aids, (e.g. balls) if these washing machines are suitable. Follow are supplied with the detergent, the manufacturer's instructions and particularly when using liquid detergent. dosage recommendations on the Refill packs of detergent packaging.
Page 65
Detergent TwinDos dispensing Adding fabric conditioner or liquid starch separately One of the automatic dispensing containers must be filled with fabric Prepare the starch in accordance with conditioner. the manufacturer's instructions on the packaging. Select the programme. Separate rinse Tip: When adding fabric conditioner, ...
Detergent Recommended Miele detergents Miele detergents have been specially designed for day-to-day use in Miele washing machines. See “Detergents and care products” for more information about these detergents. Miele Miele single-use capsules UltraPhase 1 and 2 ...
Detergent Recommended detergents in accordance with Directive (EU) Nr. 1015/2010 The recommendations apply to the temperature ranges given in the Programme chart. Universal Coloureds Delicates and Specialist woollens detergent Cottons – – Cottons – – ...
Cleaning and care Cleaning the external casing Cleaning the detergent and the control panel dispenser drawer Washing at low temperatures and the Risk of electric shock! use of liquid detergent can lead to a Mains voltage is present when the build-up of bacteria in the detergent washing machine is switched off dispenser drawer.
Page 69
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
To clean the system, you either need a “TwinDosCare” cleaning cartridge (only available in selected countries) or an empty TwinDos container. Both are available from the Miele online shop. The washing machine has a cleaning programme for the TwinDos system. Running the cleaning programme will clean the hoses inside the washing machine.
Cleaning and care First turn off the stopcock. Cleaning the water inlet filter Unscrew the inlet hose from the The washing machine has a filter to stopcock. protect the water inlet valve. The accessible filter in the union at the open end of the inlet hose should be checked every six months or so, or more often if there are frequent interruptions to the...
The door is not closed properly. The door lock could in the display: not engage. The door will not lock. Call Close the door again. Service. Start the programme again. If the fault message appears again, contact your Miele dealer.
Then switch the washing machine on again. Restart the programme. If the fault message appears again, contactyour Miele dealer. The water protection system has reacted. Waterproof system Close the stopcock.
In order to prevent bacteria and unpleasant odours run the "Clean building up in the washing machine, run the machine" Maintenance wash programme using Miele programme. machine cleaner or a universal powder detergent. The water inlet for hot water is blocked or turned off.
Page 75
Remove the fluff with your finger. Do not use any sharp or pointed tools to do this. Restart the programme after cleaning. If the fault message appears again, contact your Miele dealer. The washing machine can still be used but with reduced functionality.
Problem solving guide Messages or faults with the TwinDos system Issue Cause and remedy The detergent in the cartridge is running low. There is Only a few more sufficient left for approx. 4 to 8 wash programmes. washes are possible ...
Touch the sensor before running the next TwinDos dispensed. programme. Automatic dispensing will be activated. No detergent/fabric softener was dispensed although automatic dispensing was activated. Try again. If detergent is still not dispensed, call Miele.
The drum lighting does The drum lighting goes out automatically after not come on. 5 minutes. Open the pull-down menu from the overview menu and then touch the sensor control. The drum lighting is faulty. Call the Miele Customer Service Department.
Page 79
Problem solving guide General problems with the washing machine Issue Cause and remedy Large amounts of The water pressure is too low. detergent residue Clean the water inlet filter. remain in the detergent It may be useful to select the Water plus extra dispenser drawer.
Page 80
Problem solving guide General problems with the washing machine Issue Cause and remedy Steam comes out of the This is not a fault. detergent dispenser Steam may emerge from the detergent dispenser drawer while steam is drawer, depending on the amount of laundry and being generated.
They do not remove fruit, coffee and tea result. stains. Use the Miele 2 Phase System. The targeted addition of UltraPhase 2 during the wash process removes stains effectively. Use a general purpose powder detergent containing a bleaching agent.
Problem solving guide The door will not open Issue Cause and remedy The door cannot be The door is locked during a programme. pulled open during a Touch the Start/Stop sensor to cancel the programme. programme. The programme is cancelled, the door will unlock and you will be able to pull it open.
Problem solving guide Draining the washing machine Opening the door in the event of a blocked drain outlet and/ Remove the drain filter, though not or power cut completely. Switch off the washing machine. Place a suitable container under the access panel, e.g.
Page 84
Problem solving guide Open the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to remove laundry. Clean the drain filters thoroughly. ...
Miele dealer. from your Miele dealer. Contact details for your Miele dealer Please note that telephone calls may are given at the end of this document. be monitored and recorded for training purposes.
*INSTALLATION* Installation Front view a Inlet hoses with Waterproof system f Door for cold mains water and alternative g Access to filters, pumps and water supplies emergency release b Mains connection cable h Access panel for TwinDos cartridges c Flexible drain hose (with detachable i Four height-adjustable feet swivel elbow) d Control panel...
*INSTALLATION* Installation Rear view a Drain hose f Water intake hose with Waterproof system for alternative water b Transport clips for inlet and drain supplies. hoses and mains connection cable g Safety caps for transit bars c Mains connection cable h Transport clips for inlet and drain d Protruding lid for holding when hoses and for storing transit bars...
1. Pull off the transit bar covers and Secure the washing machine using a clamp/fastening bracket (MTS floor 2. then use a screwdriver to release the mounting kit – available from your catches at the top and bottom. Miele dealer or Miele spare parts department).
Page 89
*INSTALLATION* Installation Using the spanner supplied, turn the Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then withdraw the transit bar. withdraw the transit bar.
*INSTALLATION* Installation Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. Cover the holes for the transit bars after they have been removed. Secure the transit bars to the back of the washing machine.
*INSTALLATION* Installation Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine.
Installation Installing under a continuous Washer-dryer stack worktop The washing machine can be combined with a Miele tumble dryer in a washer- Risk of electric shock due to dryer stack. The appropriate “WTV” exposed cables stacking kit* to match your dryer is There is a risk of coming into contact required.
Installation The inlet hoses The water protection system – The casing on the inlet hoses The Miele water protection system contains two solenoid valves , protects all parts of the washing which cut off the water intake directly machine from water damage.
Page 94
*INSTALLATION* Installation The electronic unit and drainage and overflow protection – Drainage protection Any leaking water is collected in the sump in the base of the machine. A float switch closes the solenoid valves , preventing any more water from flowing into the machine and water in the suds container is pumped away.
*INSTALLATION* Installation The washing machine should be Connection to the water supply connected to the mains water supply in Health risk and risk of damage accordance with current local and due to contaminated incoming water. national safety regulations. The German authorities do not require it to have a The quality of the incoming water non-return valve as the washing...
This filter must not be removed. Hose extension A 1.5 metre long (metal) extension hose is available from your Miele dealer or the Miele Spare Parts Department as an optional extra. Cold water (cold Silver label...
*INSTALLATION* Installation Cold water (default setting) Soft water, rain water and well water The washing machine will be operated 1. For hygiene reasons water should be with cold mains water only. at least of the quality used for bathing in. The other intake hose is secured to the back of the washing machine.
*INSTALLATION* Installation Water intake overview depending on selection programmed Main wash Rinses First and Final rinse subsequent rinses Cold water / Hot main wash / / Hot main wash + rinses Soft water ...
For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted. Please contact your Miele dealer for advice. a Adapter For a delivery head of 1.8 m the hose can be extended to a length of up to 2.5...
*INSTALLATION* Installation Non-rewireable plugs BS 1363 Electrical connection U.K. The fuse cover must be refitted when All electrical work should be carried out changing the fuse, and if the fuse cover by a suitably qualified and competent is lost, the plug must not be used until a person, in strict accordance with suitable replacement is obtained.
Consumption data Load Energy Water Duration Residual moisture kWh Litres h:min Cottons 90 °C 2,60 2:29 60 °C 1,45 2:29 60 °C 1,10 2:19 * 0,60 2:59 * 4,50 0,43 2:59 40 °C 1,03 2:39 40 °C 0,70 2:29 * 0,35 2:59 20 °C 0,40 2:39 Minimum iron 30 °C 0,34...
Page 103
Consumption data Consumption data can vary from the nominal values given depending on water pressure, water hardness, water inlet temperature, room temperature, type and volume of load, fluctuations in the electricity supply and any extras selected. With the PowerWash washing technique, during the heating phase, the temperature measured by the sensor in the suds container is higher than the actual temperature of the laundry.
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Height for building under 850 mm Width for building under 600 mm Weight Approx. 96 kg Capacity 9 kg dry laundry Voltage See data plate Connected load See data plate Fuse rating...
Settings Changing a setting You can use the settings to alter the washing machine's electronics to suit Change the value displayed and changing requirements. confirm with The settings can be altered at any time. Touch an option to select it. Accessing the settings menu An option which is selected will be highlighted orange.
Do not forget the code you have Options set. – Previous programme If you forget the code, only Miele Shows the consumption for the last Technical Service can unlock the wash programme carried out. washing machine. Make a note of your new code.
Settings Memory Display brightness The washing machine will save the The brightness of the display can be last settings (temperature, spin speed altered. and some of the Extras) selected for a It can be set to one of 7 different programme after the programme has settings.
Heavy deleted. The Factory default setting is: Normal The following agents can be used: Water plus level – Miele UltraPhase 1 – Miele UltraPhase 2 There are four different water levels which can be selected for the Water – Universal detergent plus Extra.
Settings Maximum rinse level Gentle action The water level in the rinses can be With gentle action activated, drum permanently set to the highest value. agitation is reduced. In this way, lightly soiled items can be washed more This function is important for allergy gently.
(visible if Miele@home is activated) being disposed of or sold, or if a used washing machine is being put into Miele@home remains set up, the WiFi operation. This is the only way to function is switched off. ensure that all personal data has been...
This function can be used for starting Once the Miele@mobile app has been your washing machine automatically installed on your mobile device, you at a time when your energy supplier's can check the status of your washing energy costs are most economical.
If you do not install an update, you can The update may take several minutes. continue to use your washing machine Please note the following information in the usual way. However, Miele about the RemoteUpdate function: recommends installing updates. – You will only receive a message when Activating/Deactivating an update is available.
Settings – Rain water Appliance parameters This setting is recommended if the Water intake water hardness level of the alternative water supply is lower than that of the You can programme 6 options for the mains water supply. Detergent water intake. savings can be made with this setting.
Legal information Open source licences You can view information here. Copyrights and Licences Miele uses their own and third party software which is not subject to any so- called Open Source Licence for the operation and control of the appliance.
Temperature reduction Installation requirements At high altitudes water has a lower Low water pressure boiling point. Miele recommends If the water pressure is below 100 kPa activating the reduced temperature (1 bar), the programme will be setting at altitudes of 2000 m or above cancelled and a fault message will to prevent water from boiling.
– Excellent stain removal even at low These and many other useful products temperatures can be ordered from your Miele dealer (see end of this booklet for contact UltraColor (liquid detergent) details). – Best wash results at 20/30/40/60 °C Detergent –...
– Visibly renews fabric with just one wash Caps Sport – Special Miele formula with – For synthetic fabrics Novozymes technology – Neutralises odours thanks to built-in – Removes pilling and renews colour odour absorber intensity and brightness –...
Detergents and care products Fabric care Machine care These fabric care products are available TwinDosCare as convenient single-use capsules. – Cleaning agent for the TwinDos Fabric conditioner cap dispensing system – Fabric conditioner for freshly scented – Use before a prolonged downtime (at laundry least 2 months) –...