Table of Contents
Advertisement
Installation
Installing the downdraft extractor
The downdraft extractor can be in-
stalled with the connector for the air
duct on either the right or the left-hand
side.
a Connector for air duct on the right
b Connector for air duct on the left
Stick the supplied sealing strip under
the edge of the cover. Do not apply
the sealing strip under tension.
Fit the clips onto the spacer bars.
Guide the control cable downwards
between the spacer bars.
Fit the cover onto the spacer bars.
62
Remove the grease trap from the cas-
ing.
Fasten the casing from the inside with
the screws on the right and left
sides (3 in each case).
Fasten the grease trap.
Mount the air duct.
Ensure that the air duct is not under
mechanical tension after installation.
Advertisement
Table of Contents
