Moisture
The
Combi mode
and
functions use a combination of oven
function and moisture. You can alter the
moisture level within a given range for
an individual cooking programme or a
cooking stage.
Depending on the moisture setting for
the programme, either moisture or fresh
air is injected into the oven. If the
moisture level is set to 20 %, the
maximum amount of air will be injected
and no moisture. If the moisture level is
set to 100 %, air will not be injected
into the oven and the maximum amount
of moisture will be injected.
Some food gives off moisture during
the cooking process. This moisture
from the food also controls the amount
of moisture needed. If the required
amount of moisture is very low and the
food already contains a lot of water the
steam generator may not be activated
at all.
Reheat
Description of functions
Duration
Depending on the function, you can set
a cooking duration of between 1 minute
and 10 or 12 hours.
The duration of the Automatic and
Maintenance programmes is set at the
factory and cannot be altered.
With
Steam cooking
and programmes that use steam alone,
the set cooking duration does not start
to count down until the set temperature
has been reached. It begins
immediately with all other functions and
programmes.
Noises
You can hear the noise of the fan when
the appliance is operating. Noises
similar to those of a kettle can be heard
when steam is being generated.
and functions
25