Page 1
Operating and Installation Instructions Washer To prevent accidents and appliance damage, read these instructions before installation or use. en-US M.-Nr. 10 669 370...
Environmentally friendly washing .............. 15 Before using for the first time ................ 16 1. Setting the display text..................17 2. Setting up Miele@home ..................17 3. Removing the shipping struts ................19 4. Starting the calibration program................ 19 1. Prepare the laundry.................. 20 2.
Page 3
Changing the program ..................44 Child lock....................... 45 Adding or removing laundry .................. 45 Detergent ...................... 46 Miele-recommended detergents ................46 General detergent recommendations..............47 Cleaning and care .................... 48 Cleaning the drum (Hygiene info) ................48 Cleaning the exterior and control panel ..............48 Cleaning the detergent dispensing drawer ............
Page 4
Contents Technical Service.................... 61 Contact in case of fault ..................61 Optional accessories..................... 61 Warranty ........................ 61 Installation...................... 63 Front view ......................63 Rear view....................... 64 Installation site....................... 65 Transporting the washing machine to its installation site........65 Removing the shipping struts ................65 Refitting the shipping struts ..................
Consult with local authorities, dealers or Miele in order to dispose of and recycle electrical and electronic appliances. Miele assumes no responsibility for deleting any personal data left on the appliance being disposed.
IMPORTANT SAFETY INSTRUCTIONS WARNING To reduce the risk of fire, electric shock or injury to persons while using your appliance follow basic safety precautions, including the following: Read all instructions before using the appliance. GROUNDING INSTRUCTIONS This appliance must be grounded. In the event of a malfunction or breakdown, grounding will reduce the risk of electric shock by pro- viding a path of least resistance for electric current.
Page 8
If the power cord is damaged it must only be replaced by a Miele Service technician with a genuine Miele power cord. Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for 2 weeks or more.
Page 9
IMPORTANT SAFETY INSTRUCTIONS Do not allow children to play on or in the appliance. Close super- vision is necessary when the appliance is used near children. The drum door glass will be hot when washing at very high tem- peratures.
Page 10
Miele tumble dryer and the Miele washing machine. If installing the machine on a Miele plinth (available as an optional accessory), please make sure you order the correct one for this washing machine.
Page 11
IMPORTANT SAFETY INSTRUCTIONS FCC Declaration of Conformity These devices comply with FCC Rules Part 15. This equipment has been tested and found to be in compliance with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules of Oper- ation and is subject to the following conditions: These devices may not cause harmful interference.
Guide to the washer Control panel a Control field d OK sensor button The control field consists of a dis- Confirm the selected values, such as play and various sensor buttons. The temperature and spin speed, with individual sensor buttons are ex- the OK sensor button.
Guide to the washer h Sensor button l Program selector You can specify the level of soiling of For selecting programs and for the load in three settings. switching off. The washing machine is switched on when you select a –...
Guide to the washer Setting numerical values Display The standard display shows the follow- Start in ing values from left to right: The numerical value is highlighted in Warm + Max 1:26 white. Touching the sensor button ...
Miele therefore recommends cleaning the washing machine once every month. The washing machine provides you with a reminder with the message Sanitize info: Run a high temp.
Before using for the first time Remove the drain hose elbow Before initial commissioning, please from the drum note the information in "Installation and connection". An elbow piece for the drain hose is stored in the drum. Removing the protective foil and stickers ...
The following message appears in the gram selector to the Additional pro- display: grams/ position in the sub- Settings Set up now menu. To set up Miele@home now: Touch the OK sensor button. english (USA) ...
Page 18
Before using for the first time Miele@mobile App Connecting via the app The Miele@mobile App is available to The Miele@mobile app can be used to download free of charge from the Apple connect to your network. ® App Store or from the Google Play ...
Before using for the first time Touch the sensor button until the 3. Removing the shipping OK sensor button lights up and con- struts firm this with OK. Failure to remove the shipping struts can result in damage to the Hot + 1:40 washing machine and to adjacent...
1. Prepare the laundry Solvent-based cleaners (e.g., benzene) can damage plastic parts. When pre-treating a stain, make sure that plastic parts do not come into contact with cleaning agent. Chemical (solvent-based) clean- ing agents can cause damage in the washing machine.
2. Selecting a program 2. Selecting additional programs by Switching on the washing ma- setting the program selector to the chine "More programs/" position and the Turn the program selector to a pro- display: gram. The interior drum lighting will come on. The drum lighting will go out automati- cally after five minutes.
Page 22
2. Selecting a program 3. Selecting the programs via the Mo- bileControl program selector posi- tion and the Miele@mobile app Tip: In order to use MobileControl , the washing machine must be logged on to the WiFi network and the...
3. Loading the washing machine Opening the door Closing the door Take hold of the door and pull it Make sure that no items are caught open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laun- dry.
4. Selecting program settings Extras sensor button Selecting a temperature/spin speed You can select additional extras using the Extras sensor button. You can alter the preset temperature/ Touch the Extras sensor button. spin speed of a wash program if this is permitted by the program.
4. Selecting program settings Level of soiling Setting the delay start time Touch the sensor button. You can specify the level of soiling of the load. The following will appear in the display: – Light ...
Page 26
4. Selecting program settings Canceling delay start Setting the timeframe The selected delay start time can be If you have activated the SmartGrid canceled before the program start. function in Settings, SmartStart in stead of will appear in the dis- Start in ...
5. Adding detergent Tips for dispensing There are several options for adding de- tergent to the washing machine. Adjust the detergent dosage to the level of soiling of the laundry and the maxi- Detergent dispenser drawer mum load. Reduce the amount of de- tergent with smaller loads (e.g., reduce This washing machine requires high ef- the amount of detergent by ⅓...
5. Adding detergent Using chlorine bleach Using powder detergent The detergent dispenser drawer con- Chlorine bleach is a very aggres- tains an insert for liquid detergent in the sive substance. compartment. This insert must be It can cause damage to the colors removed to use powder detergent.
Capsules are available to order from Miele's online store, Miele's customer Add the fabric softener or the liquid service, or from your Miele dealer. starch to the compartment. Do not Activating CapDosing exceed the maximum level mark.
Page 30
5. Adding detergent Inserting a capsule Open the detergent dispenser drawer. Close the lid and press it firmly shut. Close the detergent dispenser drawer. Open the lid of the / compart- ment. The capsule is opened by the act of inserting it in the detergent dispenser drawer.
Page 31
5. Adding detergent The contents of the capsule will be Dyes / dye removers added to the wash program at the cor- Do not use dye removers in this rect time. washer! During CapDosing, water intake to the compartment is solely via the The use of dyes in the washer is recom- capsule.
6. Start the program - Program end Pull open the door. Starting a program Remove the laundry. Touch the flashing Start/Stop sensor button. Items left in the drum could discolor The door will lock ( will appear in the other items in the next wash or be- display to show this) and the wash pro- come discolored themselves.
Spin cycle Ending the wash program Final spin speed in the wash program Use if you want to remove the laundry when it is dripping wet and without When a program is selected, the opti- spinning. mum spin speed for the wash program is always shown in the display.
Program guide Programs on the program selector The temperature marked with is pre-set. Temperature Item/Tip with garment care label sym- bols Normal Full load (17.6 lb/8 kg) Cotton, linen, and mixed fibre textiles made of 140°F/60°C Hot + both cotton and linen. ...
Warm 85°F/30°C Cold Cold MobileControl The Miele@mobile app is used to select the programs and operate the appliance. Express Half load (7.7 lb/3.5 kg) Cotton textiles that have hardly been worn or 105°F/40°C Warm + are only very lightly soiled.
Program guide Temperature Item/Tip with garment care label sym- bols Darks/Denims Small load (4.4 lb/2 kg) 105°F/40°C Black and dark garments made from cotton, Warm + mixed fibers, and denim. Warm 85°F/30°C – Wash inside out. Cold Cold – Denim often contains excess dye and may run during the first few washes.
Program guide Programs positioned on the More programs/ program selector Temperature Item/Tip with garment care label sym- bols Table Linens/Drapes Full load (13.2 lb/6 kg) Table Linens and drapes made of cotton and Hot + 140°F/60°C linen. 120°F/50°C 105°F/40°C ...
Program guide Temperature Item/Tip with garment care label sym- bols Proofing Small load (5.5 lb/2.5 kg) 105°F/40°C Treating microfiber fabric, ski wear, or Table Warm + Linens made from mainly synthetic fibers to provide a finish which is resistant to water and dirt.
– Optimum results can be achieved by using Miele machine cleaner. Alternatively, a univer- sal powder detergent can be used. – Dispense the machine cleaner or universal detergent directly into the drum.
Extra options You can supplement the wash pro- The garments must be suitable for dry- ing in a tumble dryer and suitable grams with extra options. for ironing . Selecting extra options Pre-wash Extra options are selected or dese- lected using the sensor buttons in the For laundry with large amounts of dirt, control field.
Extra options Gentle Extra options can be selected using the "Options" sensor Drum rotation and wash duration is re- duced. Lightly soiled textiles are button washed more gently. Selecting extra options in the display ExtraRinse Touch the Options sensor button. An additional rinse cycle can be acti- The first extra option which can be se- vated to give a better wash result.
Extra options The following extra options can be selected in addition to the programs Normal – Wrinkle-free Delicates Sanitize Handwash – – – – – Dress Shirts Express – – – – Darks/Denims Extra White Outdoor – – Table Linens/Drapes Sportswear –...
Changing the program sequence Canceling a program Interrupting a program Turn the program selector to the You can cancel a wash program at any position. time after it has started. Touch the Start/Stop sensor button. The washing machine switches off. ...
Changing the program sequence Child lock Adding or removing laundry The wash program cannot be inter- Laundry can only be added or re- rupted unintentionally. moved at the beginning of a wash pro- gram. Activating the child lock If the following message no longer ap- ...
Miele-recommended detergents The Miele detergents have been developed by Miele especially for the Miele wash- ing machine. You can order the Miele detergents from Miele's online store or you can purchase them from Miele's customer service, or your Miele dealer.
Detergent General detergent recommendations The wash programs that are not listed do not have a detergent recommendation. Universal Color deter- Detergent for Bleach detergent gent Woolens and delicates Normal – Wrinkle-free – Delicates –...
Miele. Do not use chemical solvents, abrasive cleaners, glass or all pur- pose cleaners! They will damage the...
Page 49
Cleaning and care Cleaning the compartment Removing and cleaning the insert for liquid detergents Compartment 1 has a siphon for better An insert for liquid detergents is located dispensing of the chlorine bleach. in the compartment of the detergent dispenser drawer.
Page 50
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. The siphon in the / compart- ment no longer works and the com- partment can overflow. Clean the siphon particularly thor- oughly after using liquid starch a few times.
Cleaning and care Cleaning the filter in the inlet valve Cleaning the water inlet filter Using pliers, carefully loosen the The washing machine has two filters to ribbed plastic nut on the inlet valve protect the inlet valve. You should in- and unscrew.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the ma- chine, some of which may result from incorrect operation, can be remedied with- out contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. Some of the messages in the display are more than one line long.
Frequently Asked Questions The following fault message appears in the display and the program has been canceled Message Possible cause and solution The water inlet is blocked or restricted. Water intake See Check whether the faucet is turned on properly. ...
Clean Machine Touch the OK sensor button to confirm. Run the Clean Machine program using the Miele clean machine or a universal powder detergent. The washing machine is cleaned which prevents bac- teria and odor buildup. The message which appears at the end of the program or when the washing ma-...
In order to prevent bacteria and unpleasant odors building up in the machine, run the Clean machine program using Miele clean machine or universal powder detergent. The door and detergent dispenser drawer were closed after washing.
Frequently Asked Questions General problems with the washing machine Problem Possible cause and solution There are unusual There is no fault! sounds coming from Lapping sounds at the beginning and end of the the drain pump. drain process are normal. The fabric softener is The siphon tube is either positioned incorrectly or not completely dis-...
Use more detergent or liquid detergent with this type of soiled laundry. Before washing the next load, run the Clean ma- chine wash program using Miele clean machine or a universal powder detergent. White residues which The detergent contained compounds (zeolites) to aid look like powder deter- water softening which are not soluble in water.
Frequently Asked Questions The drum door cannot be opened Problem Possible cause and solution The door cannot be The door is locked during a program. pulled open during a Touch the Start/Stop sensor button. program. Select in the display Cancel Program Add laundry using the ...
Frequently Asked Questions Draining the washing machine Opening the drum door during a power failure When draining water from the ma- chine, do not unscrew the drain filter Blocked drain outlet completely or take it right out. If the drain outlet is blocked, a larger quantity of water can remain in the ...
Page 60
Frequently Asked Questions Opening the door Reaching into a moving drum is extremely dangerous. Always make sure that the drum is stationary before reaching in to re- move laundry. Clean it thoroughly. Remove any foreign objects (e.g., buttons, coins, etc.) and clean the in- terior.
Optional accessories In the event of a fault which you cannot Optional accessories are available remedy yourself, please contact your through your Miele dealer or Miele. Miele dealer or Miele Technical Service. Warranty Contact information for Miele Techni- For further information, please refer to cal Service can be found at the end of your warranty booklet.
Installation instructions Alteration rights reserved. Visit our website for all the current product specifications, technical appliance information, and warranty information. To avoid accidents or damage to the appliance, please read these instructions before installing and/or using it.
Installation Front view a Drain hose e Control panel b Hot-water inlet hose (pressure-proof f Detergent dispenser drawer to 1,015 psi/7,000 kPa) g Door c Cold-water inlet hose (pressure- h Flap for drain filters, drain pump, and proof to 1,015 psi/7,000 kPa) emergency release d Electrical connection i Four height-adjustable feet...
Installation Rear view a Drain hose f Hot-water inlet hose (pressure-proof to 1,015 psi/7,000 kPa) b Transport clips for inlet and drain g Safety caps for shipping struts hoses and power cord c Electrical connection h Transport clips for inlet and drain hoses and for storing shipping struts d Protruding lid for holding when mov- when not in use...
Remove the left and right covers. MTS floor mounting kit (available 1. Pull off the shipping strut covers and from Miele). 2. then use a screwdriver to release the catches at the top and bottom.
Page 66
Installation Using the wrench supplied, turn the Turn the right-hand shipping strut left-hand shipping strut 90°, then 90°, then withdraw the shipping strut. withdraw the shipping strut.
Installation If the holes are not covered, there is a risk of injury. To avoid the risk of injury the holes for the shipping struts must be cov- ered after they have been removed. Secure the shipping struts to the back of the washing machine.
Installation Leveling the machine The washing machine must stand per- fectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase elec- tric and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used to level the machine.
Installation For closets at room height Additional installation require- ments You can also insert a ventilation open- ing at the top of the closet. In addition, All installations must be done in you must also provide an opening on accordance with local codes.
Installation Installation on a plinth Product Dimensions – WTS 510 (only available in white) Dimensions = 4.9 ft (1.50 m) drain hose with Washer-dryer stack connection to the top left on the rear – WTV 512 and WTV 502 washer-dryer stacking kit ...
Electronic module and washing ma- The water protection system chine housing The Miele water protection system pro- – Sump: Any leaking water is collected tects all parts of the washing machine in a sump in the base of the machine.
Longer hoses of 8.2 ft (2.5 m) or 13 ft Replace the hose only with a genuine (4.0 m) in length are available from your Miele hose, or with a hose able to with- Miele Dealer or the Miele Technical Ser- stand up to 145 psi (10.000 kPa) pres- vice as optional accessories.
If required, the hose can be extended to a length of up to 16.4 ft (5 m). Acces- sories are available from your Miele dealer or the Miele Technical Service. Drainage options: 1. Directly into a sink: Lay the hose...
Installation ELECTRICAL INSTRUCTIONS Electrical connection This installation should be performed by GROUNDING INSTRUCTIONS an experienced and qualified techni- This appliance must be grounded. In cian, in accordance with local codes the event of a malfunction or break- and regulations. down, grounding will reduce the risk of electric shock by providing a path The washing machine is supplied with a of least resistance for electric cur-...
Technical data Height 33 7/16" (850 mm) Width 23 7/16" (596 mm) Depth 25 1/16" (636 mm) Depth with door open 41 1/2" (1054 mm) Height for building under 32 5/16" (+5/16"/-1/16") (820 mm) Width for building under 23 5/8" (600 mm) Weight Approx.
Settings Selecting settings You can use the settings to alter the washing machine's electronics to suit Touch the sensor buttons until changing requirements. the setting you want appears in the display. The settings can be altered at any time.
This only ap- pears if the PIN code has been acti- vated previously. Make a note of the new PIN code. If you forget the code, the washing machine will need to be unlocked by Miele Technical Service.
Settings Unit Brightness The temperature and spin speed can You can set the brightness of the dis- be displayed in 3 different forms. play, the sensor buttons, and the dimmed sensor buttons. Options Options – (default setting) Clear text The values are displayed as words. –...
Settings Display switch-off Memory The display and the sensor button The washing machine will save the lighting is switched off to save energy. last settings (temperature, spin speed, The Start/Stop sensor button flashes and some of the extra options) se- slowly.
+ 9 min 34-minute pre-wash At high altitudes water has a lower – + 12 min boiling point. Miele recommends acti- 37-minute pre-wash vating the reduce temperature setting at altitudes of or above 6560 ft Soak duration (2,000 m) to prevent water from boil- ing.
Settings Maximum rinse level Low water pressure The water level in the rinse can be If the water pressure is below 14.5 psi permanently set to the highest value. (100 kPa), the program will be can- celed and the fault message Drainage This function is important for allergy will appear.
This message only appears if the wash- the default setting. ing machine has not yet been con- Miele@home is no longer set up. A new nected to a WiFi network. connection setup has to be carried out Please refer to "Initial set-up" to set up in order to use the Miele@home setting the connection.
Miele@home setting is set up and activated. and activated. Once the Miele@mobile app has been This function can be used for starting installed on your mobile device, you your washing machine automatically can check the status of your washing...
Settings Bleach You can activate the automatic addi- tion of chlorine bleach at the end of the main wash. Chlorine bleach may only be used in some programs. See "5. Adding deter- gent – Using chlorine bleach" for more detailed information. Activating chlorine bleach extends the program duration by approximately 10 minutes.
Optional accessories Sport Detergent – Liquid detergent for sportswear and UltraWhite fleece garments – Multi-purpose powder detergent – Neutralizes unpleasant odors – For white and light-colored laundry – Retains the shape of the textiles as well as heavily soiled cotton items Downs –...
Optional accessories Fabric care Machine care Fabric care agents are available as cap- Detergent sules in convenient single dose – For cleaning the washing machine amounts or in a handy bottle. thoroughly and effectively Proofing agent – Removes grease, bacteria, and asso- –...
Page 87
Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Headquarters and Miele Centre Princeton, NJ 08540 161 Four Valley Drive Phone: 800-843-7231 Vaughan, ON L4K 4V8 609-419-4298 Fax: www.miele.ca www.mieleusa.com...