Miele DA 6996 W Operating And Installation Instructions page 29

Hide thumbs Also See for DA 6996 W:

Table of Contents

After cleaning

 After cleaning, leave the filters on an

absorbent surface to dry.

 When removing the panel and grease

filter for cleaning, also clean off any

residues of oil or fat from the now

accessible parts of the casing to

prevent the risk of these catching fire.

 Replace the drip tray.

 Replace the grease filter, making sure

that the locking clip is facing

outward.

 If the filter has been installed

incorrectly, you can insert a small

screwdriver into the slit to disengage

the locking clip.

Cleaning and care

 Hook the panel in at the top and then

push it into position at the bottom.

Resetting the filter saturation

indicator for the grease filter

Once cleaning is complete, the filter

saturation indicator must be reset.

 While the fan is turned on, press the

grease filter button  for approx. 3

seconds, until only the 1 is flashing.

The grease filter symbol  goes out.

When cleaning the grease filters before

the full operating time has elapsed:

 Press the grease filter button  for

approx. 6 seconds, until only the 1 is

flashing.

Table of Contents

Show Quick Links

Table of Contents