hit counter code

Switching Off; Cancelling A Programme; Programme Cancellation Due To A Fault; Cancelling The Programme Manually - Miele G 7883 Operating Instructions Manual

Laboratory glassware washer
Table of Contents

Advertisement

Switching off

^ Press and release the "On/Off"
switch.
As the machine is fitted with an
electric door lock, the door can only
be opened if the "On/Off" switch is
pressed in (see "Opening and
closing the door").

Cancelling a programme

,
Where a programme is
cancelled, the items must be
reprocessed.
Programme cancellation due to a
fault
If the programme is cancelled before
completion, a fault message "F.." will
appear in the display.
Depending on the cause, the
appropriate measures must be taken to
resolve the problem. Proceed as
described in "Problem solving guide".

Cancelling the programme manually

Once a programme is running, it should
only be cancelled in extreme cases,
e.g. when articles in the machine rattle
or jostle against each other and have to
be rearranged.
,
With officially registered
epidemics, any contaminated water
must be decontaminated using a
disinfecting agent before it is
discharged into the sewerage
system.
^ Turn the programme selector to f.
The programme will be cancelled after
approx. 2 seconds.
^ Open the door.
,
Caution. Water and items in the
machine may be hot. Danger of
burning or scalding.
^ Arrange the load securely.
(Wear protective gloves where
necessary, and observe appropriate
health and safety regulations relating
to infectious diseases).
^ Replenish powder cleaning agent if
necessary.
^ Close the door.
^ Start the "Drain" programme.
The water will drain away.
^ Select and start the programme
again.
The following procedure should be
followed when dealing with official
cases requiring the containing of
epidemics using the "Special"
programme:
^ Start the programme again.
The display will show the temperature
holding time required counting
downwards.
Operation
37

Advertisement

Table of Contents
loading

Table of Contents