Miele DA 7000 D Operating And Installation Instructions page 15
Hide thumbs
Also See for DA 7000 D:
- Operating and installation instructions (36 pages) ,
- Installation diagram (2 pages) ,
- Operating and installation instructions (32 pages)
Table of Contents
Advertisement
One or more of the 1 to 4 sensors will
flash.
The number of flashing sensors
indicates the percentage of the
operating time which has already been
used up.
Sensor 1
Sensors 1 and 2 = 50 %
Sensors 1 to 3
Sensors 1 to 4
^ When you take your finger off the
Grease filter sensor l, the current
fan setting will appear.
The number of operating hours used
remains in the memory, even when the
appliance is switched off or there is a
power cut.
= 25 %
= 75 %
= 100 %
Operating hours counter for the
charcoal filters
On delivery, the operating hours counter
for the charcoal filters is switched off.
For recirculation mode, the operating
hours counter needs to be set to suit
the type of cooking you do:
The Charcoal filter sensor | will light
up after the rangehood has operated
for the number of hours set.
^ The charcoal filters must then be
replaced with new ones.
Afterwards, the grease filter operating
hours counter must be reset (See
"Cleaning and Care").
Activating and altering the operating
hours counter for the charcoal filters
^ Press the On/Off sensor s to switch
the fan off.
^ Touch the Run-on sensorm and the
Charcoal filter sensor | at the same
time.
The Charcoal filter sensor | and one of
the fan power setting sensors 1 to 4 will
flash.
Sensors 1 to 4 indicate the time set:
1 = 120 hours
2 = 180 hours
3 = 240 hours
4 = deactivated
^ Touch the 1 sensor to select a shorter
time and the 4 sensor to select a
longer time, until the time required
has been set.
Operation
15
Hide quick links:
Advertisement
Table of Contents
