Download Print this page

Set Up For Extraction Mode - Miele TX3587 Operating And Installation Instructions

Hide thumbs Also See for TX3587:

Table of Contents

Set up for extraction mode

 If required, install the non-return flap.

Check that the flap opens easily and

closes by itself.

A non-return flap is used in each of

the two exhaust sockets on the

DA 2210.

 Attach the exhaust ducting, e.g.

flexible hose, to the exhaust collar

using a hose clip (available as an

optional accessory). When using 

125 mm ducting, fit the reducing

collar supplied into the exhaust

socket (see "Connection for air

extraction").

 Place the exhaust ducting on the

exhaust collar for the rangehood.

 See "Connection for air extraction"

for further instructions on fitting the

ducting.

 DA 2210: The rangehood has two

exhaust sockets for use with two 

150 mm diameter exhaust hoses. A

"Y" adapter is supplied with the

rangehood. It may be used to feed

the exhaust from both sockets to a 

200 mm common duct.

However, for optimum performance

and minimum operating sound,

exhaust ducting via two separate

ducts is strongly recommended.

dai2699

Installation

Table of Contents