Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Miele T 8001 WP SUPERTRONIC
Summary of Contents for Miele T 8001 WP SUPERTRONIC
-
Page 1: Operating Instructions
Operating instructions for heat pump tumble dryer T 8001 WP SUPERTRONIC en - AU, NZ To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. -
Page 2: Caring For The Environment
Caring for the environment Disposal of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The packing material protects the tumble dryer from transport damage. – Make sure that your laundry is The transport and protective packing thoroughly spun before drying. -
Page 3: Table Of Contents
Contents Caring for the environment ......... . 2 Warning and Safety instructions . - Page 4 Contents Extra options ........... . 30 Freshen up .
- Page 5 Contents After Sales service ..........53 Future updates (PC) .
-
Page 6: Warning And Safety Instructions
Any other usage is not supported by the manufacturer and could be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation of the tumble dryer. - Page 7 Warning and Safety instructions The tumble dryer is not intended for outdoor use. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, unless they are supervised whilst using it or have been shown how to use it correctly by a person responsible for their safety.
- Page 8 Miele cannot be held liable for the consequences of an inadequate earthing system (e.g. electric shock). The heat pump technology in the tumble dryer uses a refrigerant which is condensed by a compressor.
- Page 9 Warning and Safety instructions Unauthorised repairs could result in unforeseen dangers for the user, for which Miele cannot accept liabilty. Repairs should only be undertaken by a Miele approved service technician. Faulty components must only be replaced by genuine Miele spare parts.
- Page 10 Warning and Safety instructions Correct use Caution! Risk of fire. To avoid the possible danger of fire, please read these warnings carefully. A clogged filter is a fire hazard! The fluff filter must be cleaned after every programme. Remove all objects from pockets such as lighters and matches. To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: –...
- Page 11 Warning and Safety instructions When washing such heavily soiled items, ensure that you use sufficient detergent and select a high temperature. If in doubt, wash the items several times. Oil-affected items can ignite spontaneously, especially when exposed to heat sources such as in a tumble dryer. The items become warm, causing an oxidation reaction in the oil.
- Page 12 Warning and Safety instructions In many programmes, the heating phase is followed by a cooling down phase to ensure that the items are not too hot to handle when you remove them (this also avoids the danger of the laundry self-igniting).
- Page 13 Warning and Safety instructions The tumble dryer must not be used – without the fluff filters in place or if the fluff filters are damaged. – without the fine filter in place or if the fine filters are damaged. This would cause an excessive build-up of fluff which in turn would cause a fault! After every cycle, remove the fluff from the surfaces and the fluff filters (see "Cleaning and care").
- Page 14 – pets or other small animals climbing into it. The tumble dryer must not be hosed down. Accessories Only use genuine Miele spare parts and accessories with this tumble dryer. If non-Miele parts are used, warranty, performance and product liabilty claims may be invalidated.
-
Page 15: Operating The Tumble Dryer
Control panel a Miele{home f Sensor U (Clear) The appliance is compatible with the – Returns to the previous menu Miele|home system (available in screen. selected countries). – Returns to the main menu if pressed twice. b Sensor : (Information) –... -
Page 16: Selector Sensors
Operating the tumble dryer Selector sensors The selector sensors are located on either side of the display. If a selector sensor is active, it will be illuminated. The following functions can be carried out using the selector sensors: Selecting an option in the menu If a menu option can be selected, it will be marked with a dot ). - Page 17 Operating the tumble dryer Favourite programmes Programme sequence display You can save up to 10 programmes The current stage of the programme is under a name of your choosing. represented by symbols in the display. Drying assistant Symbol Programme sequence This will provide you with assistance in Delay start searching for the right programme for...
-
Page 18: Layout Of The Menu Structure In The Main Menu
Operating the tumble dryer Layout of the menu structure in the main menu Favourite programmes – Favourite programmes (sorted alphabetically) – Create – Change – Delete Cottons – Minimum iron – Delicates – ..– Drying level: (depending on programme) –... - Page 19 – Keypad tone – Brightness – Contrast – Display / Keypad illumination – Memory – Anti-crease – Miele|home** – Remote control** * More sub-menus are available here. ** Only appears if the tumble dryer has been fitted with a communication module.
-
Page 20: Before Using For The First Time
Before using for the first time Before using the tumble dryer for the first time, ensure that it is correctly installed and connected. See "Installation and connection". If the tumble dryer has not been transported as described, then it must be left to stand for at least 1 hour before it is connected to the electricity supply. - Page 21 4. Note on Miele|home (available in selected countries) This communication enabled dryer can transmit programme data through the power lines to the Miele|home system if it has been fitted with a communication module (optional accessory). ^ Confirm with 5.
-
Page 22: Notes On Laundry Care
– Pure linen should only be machine action. Important: You must use a dried if specified as suitable by the Miele drying basket (optional manufacturer on the garment care accessory). label, as the surface of the fabric... -
Page 23: Preparing The Laundry And Loading The Tumble Dryer
1. Preparing the laundry and loading the tumble dryer Preparing the laundry Loading the tumble dryer ^ Press the a button to open the Separate the washed laundry and sort it according to . . . door..the drying level required, ^ Load the laundry loosely into the . -
Page 24: Selecting A Programme
2. Selecting a programme Switch the dryer on by pressing K. Main menu 10:21 $ Favourite programmes # Cottons ! Minimum iron ^ Select the programme you want: Touch the sensor on the right to display other programmes. Depending on the programme selection, a different menu will appear: –... -
Page 25: Time Drying Programmes
– Warm air: 20 min. - 2 h – Basket programme*: 40 min. - 2:30 h *The Miele drying basket (optional accessory) must be used with this programme. – Other programmes e.g. Gentle smoothing ... : Drying level/Duration are preset and cannot be changed. -
Page 26: Selecting Extra Options
2. Selecting a programme Selecting Extra options Extra options 10:21 Freshen up Gentle tumble OK ! ^ Select the Extra option you want. If you select – Freshen up, fabrics are always aired to the Normal drying level. – With Gentle tumble the agitation is lower. The Extra option selected is shown by a tick ^ Confirm with Delay start... -
Page 27: Starting The Programme
3. Starting the programme To start a programme ^ Touch the green Start sensor. Cottons 10:21 Normal - Extras (See :) Time left: 2:03 h Change ! – The time remaining appears in the display. – The current stage of the programme is represented by symbols in the display. -
Page 28: Cancelling A Programme
3. Starting the programme Cancelling a programme ^ Touch the U sensor. Cottons 10:21 Cancel programme? ! Continue Cancel ! ^ Select Cancel. The items will be cooled down , depending on the temperature reached and how long they have been dried for. -
Page 29: Removing The Laundry When The Programme Has Finished
Anti-crease, the dryer will switch off automatically. Note: If the tumble dryer is signed on to the Miele|home system, it will not switch off automatically. ^ Switch the dryer off by pressing the s button if it is still switched on. -
Page 30: Extra Options
Extra options Freshen up Extra options which can be selected The drying air is heated up for a specific length of time. After this the Extra options can be selected with the garments are aired to the Normal following programmes: drying level without any more heat being added. -
Page 31: Favourite Programmes
Favourite programmes You can save up to 10 programmes with selected settings under a name of your choosing. The name can consist of a maximum of 12 characters. Favourite programmes, once saved, are listed alphabetically. Saving Favourite programmes There are two possibilities for saving programmes as Favourite programmes. - Page 32 Favourite programmes To save names for Favourite programmes Name: D r y _ _ _ _ _ _ _ 10:21 $ Space Delete character $ ) g h i j k l m n o p q r s t u v w x ! Select character Confirm name ! ^ Select Confirm name.
-
Page 33: Programme Chart
Programme chart Cottons Max. load: 7 kg* Extra dry, Normal+, Normal** Fabric type Single and multi-layered cotton fabrics such as towelling, jerseywear, T-shirts, underwear. Notes – Select Extra dry for multi-layered and very thick fabrics. – Do not use Extra dry for loopknit fabrics (e.g. T-shirts, underwear), as they have a tendency to shrink. - Page 34 Programme chart Automatic plus Max. load: 5 kg* Normal+, Normal, Hand iron r Fabric type Mixed loads of garments suitable for the Cottons and Minimum iron programmes. Sort according to colour. Shirts Max. load: 2 kg* Normal, Hand iron r Fabric type Shirts and blouses.
- Page 35 Programme chart Sportswear Max. load: 3 kg* Normal+, Normal, Hand iron r Fabric type Sportswear which is suitable for drying in a tumble dryer. Outerwear Max. load: 2.5 kg* Normal, Hand iron r Fabric type Outerwear which is suitable for drying in a tumble dryer. Cottons hygiene Max.
- Page 36 Programme chart Standard pillows 1-2 pillows up to 80 x 40 cm Large pillows 1 pillow up to 80 x 80 cm Normal Fabric type Pillows suitable for drying in a tumble dryer, with feather, down or synthetic fillings. Note Pillows can still feel damp after being dried.
- Page 37 Notes – The drum does not rotate in this programme. For this reason, airing and drying may only be carried out if the Miele drying basket (optional accessory) is fitted in the drum. – Use this programme to dry items...
-
Page 38: Cleaning And Care
Cleaning and care Emptying the condensed water container Condensate is collected in the condensed water container during drying, unless the dryer has been connected for external drainage. Empty the condensed water container after every drying programme, unless the dryer has been connected for external drainage (see "Installation and ^ Empty the condensed water... -
Page 39: Adhering To Cleaning Intervals
Cleaning and care Adhering to cleaning intervals The fluff which is created by the This tumble dryer has a multistage drying process is collected by the filter system, consisting of the fluff fluff filters in the door and the door filters in the door and the door opening. -
Page 40: Surfaces Of The Fluff Filters
Cleaning and care Surfaces of the fluff filters Cleaning intervals Clean the surfaces of the fluff filters in the door and the door opening after each drying programme. Cleaning without water Tip: You can use a vacuum cleaner to remove the fluff. ^ Use your fingers or a vacuum cleaner to remove the fluff from the surface of the filter. -
Page 41: Cleaning With Water
Cleaning and care Cleaning with water Refitting the filters If there is a great deal of compacted The fluff filters must be dry fluff on any of the filters, they must before they are refitted. Damp or wet be removed and cleaned under hot filters could cause operational faults. -
Page 42: Fine Filter
Cleaning and care Fine filter Cleaning intervals Only clean the fine filter if Clean the plinth filter which is located in front of the heat exchanger appears in the display. ^ To clear the display: Select OK. Removing the fine filter ^ Pull the fine filter out by the handle. -
Page 43: Cleaning The Fine Filter Cover Panel
Cleaning and care Cleaning the fine filter cover panel Cleaning the heat exchanger unit compartment Danger of injury! Do not touch the cooling fins as they are very sharp and may cut your fingers. Risk of damage! Carefully run the dusting brush of the vacuum cleaner across the cooling fins. -
Page 44: Replacing The Fine Filter
Cleaning and care Replacing the fine filter Only when the filter is fitted correctly and the cover panel is closed can the condensed water system be sealed and the correct functioning of the tumble dryer be guaranteed. Cleaning the tumble dryer Disconnect the machine from the mains electricity supply. -
Page 45: Problem Solving Guide
Problem solving guide Problem solving guide Most faults can be resolved by yourself. This will save time and money as a call-out charge will apply to customer service visits where the problem could have been rectified as described in these Operating instructions. With the help of the following notes, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be put right without a call-out being necessary. - Page 46 A programme cannot – Note what is shown in the be started while there display. is a fault message in – Switch the dryer off and then the display. on again. – If a programme still cannot be started, call Miele.
- Page 47 – If a programme still cannot the display. the display. be started, call Miele. * To delete the fault message: Switch the dryer off and then on again.
-
Page 48: An Unsatisfactory Drying Result
Problem solving guide An unsatisfactory drying result Problem Possible cause Remedy The laundry is not The load consisted of – Finish drying using the sufficiently dry. different fabrics. Warm air programme. – Select a different programme next time*. Feather filled pillows Feathers are a natural The smell will dissipate smell after drying. -
Page 49: Other Problems
Problem solving guide Other problems Problem Possible cause Remedy * The drying Ventilation to and from the Open a door or window while the process goes dryer may be insufficient machine is in operation for on too long or (e.g. because it is installed increased air flow. - Page 50 – Has the fuse or circuit breaker tripped? – If you cannot remedy the problem, there is a fault. Call Miele. Power cut. When power is restored to the tumble dryer after a power cut, the programme will continue automatically.
-
Page 51: Cleaning The Cooling Fins (Grille At Bottom Right)
Problem solving guide Cleaning the cooling fins To avoid damaging the cooling (Grille at bottom right) fins, run the vacuum cleaner (using dusting brush or crevice nozzle) Generally, the cooling fins do not lightly across them without pressure. need to be cleaned. They should only be cleaned if excessive quantities of dust and lint are causing unusually long drying times. -
Page 52: Changing The Lamp
^ Apply a little pressure and, whilst doing so, turn your wrist in the direction of the arrow to open the cover. The cover will open downwards. The temperature resistant lamp should only be ordered from your Miele Chartered Agent or from Miele. -
Page 53: After Sales Service
– Your Miele Chartered Agent or on the control panel is the interface used by the Miele service technicians – Miele (see back cover for address). during service work for testing When contacting Miele, please quote purposes and for updating the the model and serial numbers, both of machine's programme data. -
Page 54: Installation And Connection
Installation and connection Front view a Mains connection cable f Four height adjustable screw feet b Control panel g Cool air intake panel (do not block, e.g. with wash basket) c Condensed water container (empty h Hose for external drainage of after every drying programme) condensed water (see "External d Door... -
Page 55: Rear View
Installation and connection Rear view If transporting the dryer at an angle, only tip towards the left side. a Protruding lid for holding when moving the machine (see arrows) b Mains connection cable c Hose for external drainage of condensed water d Accessories for connection to a sink drain outlet Transporting the dryer... -
Page 56: Installation Site
A building-under kit (Miele a fault. accessory, available to order) with a coverplate to replace the appliance's Building under a continuous... -
Page 57: Levelling The Machine
Washer-dryer stack The tumble dryer can also be combined with a Miele washing machine in a washer-dryer stack. The appropriate "WTV" stacking kit* to The machine must be perfectly level to match your dryer is required. -
Page 58: External Condensed Water Outlet
Installation and connection External condensed water outlet General notes When drying is in progress, condensed water is pumped into the condensed water container through the drain hose at the back of the dryer. The condensed water can also be drained off directly if the machine is installed near a sink, drain outlet etc. -
Page 59: External Drainage Via A Sink Or Gully
Installation and connection External drainage via a sink or gully Example: Connection to a sink drain outlet ^ See "Front view" illustration. The drain hose with non-return valve If you want to drain the water off fitted can be connected directly to a into a sink, you will need to secure suitable sink drain outlet. - Page 60 Installation and connection ^ Fit adapter 1 to the sink drain outlet using nut 2. If this nut has a flat disc in it, you should take the disc out first. ^ Attach the end of the hose 4 to adapter 1.
-
Page 61: Electrical Connection
Installation and connection Electrical connection Important This tumble dryer is supplied ready for The wires in the mains lead are connection to an AC single phase coloured in accordance with the supply. The machine is supplied with a following code: mains cable with moulded plug. -
Page 62: Consumption Data
Consumption data Load Final spin speed in a Residual Energy Duration domestic washing moisture machine min. Cottons Normal 1000 1.80 Cottons Normal 1200 1.60 1400 1.55 1600 1.35 1800 1.35 Cottons Normal + Gentle tumble 1000 1.90 Cottons Hand ironrr 1000 1.35 Cottons Hand ironrr... -
Page 63: Technical Data
Technical data Height 850 mm Width 595 mm Depth 596 mm Depth with door open 1,071 mm Height for building under 820 mm Including building under kit. See "Installation and connection" Width for building under 600 mm Depth for building under 600 mm Suitable for pushing under a worktop... -
Page 64: Settings Menu
Settings menu The Settings menu is used to alter the dryer's electronics to suit different requirements. Settings can be altered at any time. To open the Settings menu. Main menu 10:21 $ Settings ! # Favourite programmes # Cottons ^ Select Settings Selecting settings Settings 10:21... -
Page 65: Time
Settings menu Time The time of day can be shown in 24-hour or 12-hour format. The time displayed can also be corrected here. Clock format Time 10:21 $ 24 h clock ( # 12 h clock OK ! ^ Select the clock format you want. The clock format is set to 24 h at the factory. -
Page 66: Code
Settings menu Code The code prevents your tumble dryer being used without your knowledge. When the code has been activated, you have to enter a code after switching the dryer on. Otherwise the dryer cannot be operated. The tumble dryer door can be opened at any time. To activate the code You are asked to enter a code. - Page 67 Settings menu To use the dryer when the code is activated When the machine is switched on again, the display will request the lock code. ^ Enter the code 250 by pressing the sensors. The dryer is now unlocked and ready for use. To deactivate the code ^ Proceed as before with activating the code.
-
Page 68: Buzzer
Settings menu Buzzer You can see the change in the setting as soon as it has been selected. When the buzzer function has been activated, an audible tone sounds at Display / Keypad illumination the end of the programme. To save energy, the display lighting and the sensors are switched off and the Start sensor flashes slowly. -
Page 69: Memory
Settings menu Memory The electronics will memorise the drying level, any Extra options selected and the duration of the timed programmes for the current drying programme. When this programme is selected again, these memorised settings will appear in the display. Factory default Anti-crease Helps prevent creasing if laundry is... - Page 72 Alteration rights reserved/2112 M.-Nr. 09 148 220 / 00...