Miele PT 5136 OS Operating And Installation Instructions page 25
Vented tumble dryer
Hide thumbs
Also See for PT 5136 OS:
- Operating and installation instructions (68 pages) ,
- Operating and installation manual (56 pages) ,
- Installations plan (13 pages)
Table of Contents
Advertisement
Problem
Clean out
airways
Programme
cannot be
changed
Progr. end time
delayed
Possible cause
The dryer is not working
efficiently or economically.
Possible causes: A build-up of
fluff or detergent residues.
The vent ducting may be very
long, which does not
constitute a fault.
An attempt has been made to
alter a programme while it is in
progress.
This is not a fault.
Problem solving guide
Remedy
– Cleaning the fluff filter is
usually all that is required.
However, if the Clean out
airways message does not
go out after you have
cleaned the filter, then also
check all the possible
causes described under
"The drying process goes
on too long or even
switches off".
To delete the fault message:
– Confirm with OK .
If very long ducting is used,
then programme times will be
longer and energy
consumption higher.
You can adjust the setting
which controls when or if the
message Clean out airways
appears.
– See "Settings menu J,
Clean out airways".
– You will need to cancel the
current programme before
you can select a new one.
In the period between
selecting Delay start and the
programme starting, the
settings were changed or
there was a power cut.
25
Advertisement
Table of Contents
