Table of Contents
Advertisement
Operation (manual mode)
Switching power management on/off
You can deactivate Power
management.
This can, however, result in increased
electricity consumption.
Switch off the rangehood. The
deflector plate must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Press the run-on control 515 for
approx. 10 seconds, until the 1 lights
up.
Then press in turn,
– the lighting control ,
– then the "" touch control, and
– the lighting control again.
If power management is switched on,
the 1 and IS indicators will light up
constantly.
If it is switched off, 1 and IS will flash.
Press "" to switch power
management off.
The 1 and IS indicators will flash.
To switch it on, press "".
The 1 and IS indicators will light up
constantly.
Confirm the setting by pressing the
run-on control 5 15.
24
All the indicator lights will go out.
If you don't confirm your selection
within 4 minutes, the rangehood will
automatically revert to the previous
setting.
Hide quick links:
Advertisement
Table of Contents
