Related Manuals for Miele PT 6185
Summary of Contents for Miele PT 6185
- Page 1 Operating Instructions Tumble Dryer PT 6185 To prevent accidents and machine damage read these instructions before installation or use. M.-Nr. 05 945 470...
-
Page 3: Table Of Contents
Contents IMPORTANT SAFETY INSTRUCTIONS ......... . . 4 Guide to the machine . -
Page 4: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS To prevent fires, do not use this Installation, repair and maintenance work tumble dryer to dry the following: should be performed by a Miele – Articles containing foam rubber, rubber or authorized service technician. Work by rubber like materials. - Page 5 Clean the lint filter regularly. A build up of If the fault occurs again, call the Miele lint could block the airflow, heating and Technical Service Department. ventilation. This may impair the efficiency of the machine.
-
Page 6: Guide To The Machine
Guide to the machine 1 Control panel 4 Power main switch 2 Door 5 Vent 3 Four height adjustable feet... - Page 7 Guide to the machine Control panel 6 Program sequence / Fault indicators 8 Push buttons = On indicator "a Door" button = Drying To open the drum door. ä = Cool down "s On-Off" button = Anti crease / End "L Low temperature"...
-
Page 8: Operation
Operation Before using for the first time Preparing the laundry ^ Wipe out the inside of the drum with a soft ^ Sort the laundry according to fabric type dry cloth. for even drying results. Not all fabrics are suitable for drying. Check the manufacturer’s instructions on the wash care label. -
Page 9: Turn On The Dryer And Load The Laundry
Operation Turn on the dryer and load the Maximum Laundry weight (dry) laundry T 6185 ^ Turn on the power main (on site). Drum volume 185 Liter ^ Press the "s On/Off" button to turn on the Cottons 16.5 lbs / 7.5 kg dryer. -
Page 10: Select A Program
Operation Select a program Available programs ^ Select a program by turning the program selector clockwise or counterclockwise. ^ The " Low temperature" and "l Buzzer" features can be selected at this time. ^ Press the "h Start" button. The selected program starts. Once the required level of dryness has been reached the laundry is cooled and the drying program will end. -
Page 11: Add Or Remove Laundry During A Program
Operation Add or remove laundry during a Note program If the "l Check lint filter" light comes on, the ^ Press the "a Door" button. lint filter needs to be cleaned. Clean the filter as soon as the program has finished. See, ^ Add or remove laundry. -
Page 12: Cleaning And Care
The following should be checked and if necessary serviced once a year by an ^ Wipe the lint off the filter with your hand, authorized Miele technician: do not use any sharp objects! – Heater element and heater shaft for... -
Page 13: Changing The Light Bulb
Do not cover the opening! inside the drum and above the door (see illustration.) ^ Replace the light bulb with a temperature proof bulb available from Miele’s Technical Service Department. The light bulb must not exceed the maximum wattage quoted on the data plate. -
Page 14: Fault Indicators / After Sales Service
Faults or interruptions are indicated by the In the event of a problem which you cannot sequence lights/fault indicators flashing. fix yourself, or to order spare parts please contact the Miele Technical Service The indicator "Drying" will go out on dryers Department with gas heating... -
Page 15: Installation Instructions
Installation instructions... -
Page 16: Important Safety Instructions
Any repair or installation work is to be cleaning machines using solvents containing done by a Miele Service Technician. Any CFCs. Escaping fumes will break down into work done by an unauthorized person could hydrochloric acid if ignited. -
Page 17: Caring For The Environment
Caring for the environment Disposal of packing material Disposal of an old machine The transport and protective packing are Old machines contain materials which can environmentally friendly for disposal and can be recycled. Please contact your local be recycled. recycling authority about the possibility of recycling these materials. -
Page 18: Installation
Installation Leveling the unit Electrical connection The machine must be leveled for proper The electrical connections to the dryer must operation. The machine does not need to be be in accordance with instructions given on installed on a base, however any the installation diagram and comply with unevenness in the floor must be local regulations. -
Page 19: Guide To The Data Plate
Guide to the data plate 1 Machine type Noise emission 2 Serial number T 6185 63,6 dB 3 Voltage / Frequency 4 Mains fuse 5 Motor 6 Plate diameter/ Number of disks * 7 Drum data 8 Drum diameter / Drum depth * 9 Spin speed * 10 Dry laundry weight 11 Kinetic energy *... - Page 20 Alteration rights reserved / 2104 This paper is made from cellulose bleached without the use of chlorine.