Table of Contents
Advertisement
With the help of the following guide, minor faults in the performance of this dryer,
some of which may result from incorrect operation, can be put right without
contacting the Service Department.
,
Repair work to electrical appliances should only be carried out by a
suitably qualified person in strict accordance with current local and national
safety regulations. Repairs and other work by unqualified persons could be
dangerous. The manufacturer cannot be held liable for unauthorised work.
Check and fault messages in the display
Problem
1
Adjust the load
:
Power failure
Programme stopped
OK
;
Technical fault.
Call Service
OK
Possible cause
This is not a fault.
The electronic unit has
recognised that there is no
laundry in the drum and
cancelled the programme.
Drying individual garments or
items which are already dry
can also cause the
programme to be cancelled.
The dryer was switched off
during a drying programme
or there was a power cut.
No obvious cause.
A programme cannot be
started while there is a fault
message in the display.
Problem solving guide
Remedy
– Use the Warm air
programme (timed
drying) to dry
individual items.
To delete the message:
– Open the door.
– Confirm with OK.
– Start the programme.
– Make a note of what
is shown in the
display.
– Confirm with OK.
– Try to start the
programme again.
41
Hide quick links:
Advertisement
Table of Contents
