Related Manuals for Miele T 679 Ci
Summary of Contents for Miele T 679 Ci
- Page 1 Operating instructions for condenser tumble dryer T 679 Ci It is essential to read these operating instructions before installing or using the machine to avoid the risk of accident, or damage to the machine. M.-Nr. 04 950 470...
-
Page 2: Table Of Contents
Contents Contents Guide to the appliance..........4 Caring for the environment . - Page 3 Contents Cleaning and care Cleaning the fluff filters..........24 Cleaning the tumble dryer .
-
Page 4: Guide To The Appliance
Guide to the appliance Guide to the appliance General view Supply cable for electrical connection Condensed water container and control panel Door Drain hose for condensed water (if fitted) Four height-adjustable screw feet... -
Page 5: Control Panel
Guide to the appliance Control panel “I-On/0-Off” button “Delay start” button for switching the appliance on and off. The start of the programme can be de- When the machine is switched on, the layed for up to 24 hours. drum light will come on as you open the door. -
Page 6: Caring For The Environment
Caring for the environment Caring for the environment Disposal of packing Disposal of your old machine/appliance The transport and protective packing has been selected from materials Old machines/appliances contain ma- which are environmentally friendly for terials which can be recycled. Please disposal and can normally be recycled. -
Page 7: Warning And Safety Instructions
The manufacturer is not liable sibility. Repairs should only be under- for damage resulting from improper taken by a Miele approved engineer. use or operation. In the event of a fault, or for clean- Do not let small children play with... - Page 8 Faulty components must only be Always close the door after use to exchanged for Miele original spare avoid the danger of: parts. Only when these parts are fitted – someone leaning on the door which can the safety standards of the ma- could cause the machine to tip;...
- Page 9 Warning and safety instructions Using accessories Accessory parts may only be fitted when expressly approved by Miele. If other parts are used, guaran- tee, performance and product liability claims may be invalidated. Disposing of your old machine Before discarding an old machine, unplug it and render the plug use- less.
-
Page 10: Brief Instructions
Brief instructions Brief instructions Brief description Please read the sections on “Warn- Programmes are selected by turning ing and safety” and “Notes on the programme selector and can be laundry care”. supplemented by pressing the addi- tional option buttons. Switching the machine on and loading the laundry Press the “START”... -
Page 11: Notes On Laundry Care
Notes on laundry care Notes on laundry care Notes: Before drying, check the drying sym- bol on the textile care label. Some woven and loopknit materials (eg T-shirts, cotton jersey material) Significance of symbols: have a tendency to shrink, depending on their quality, and this is often made = Dry at normal temperature worse by over-drying. -
Page 12: How To Dry Correctly
How to dry correctly How to dry correctly Hints on saving energy Make sure there is no washing detergent dispenser among the Make sure that your laundry has laundry, as this could melt and dam- been thoroughly spun at the highest age the machine and the laundry. -
Page 13: Selecting A Programme
How to dry correctly – If the “Timed drying” button is held Selecting a programme in, the time will automatically run up to 2 hours, beginning at i5 minutes. Selecting additional options One or more additional options can now be switched on or off. If required, the delay start option can be selected. -
Page 14: After Drying
How to dry correctly "Clean out airways" indicator light After drying This indicator light shows that the dryer When the drying programme has fin- is not working most efficiently or econ- ished the “Anti-crease / finish” se- omically. quence indicator light comes on. The causes of this check message can Press the “Door”... -
Page 15: Additional Options
Additional options Additional options Anti-crease Once a programme has ended the drum will turn at regular intervals to prevent the laundry from settling into creases and folds. Short The programme running time is re- duced. – For drying fabrics that are not deli- cate. -
Page 16: Programme Chart
Programme chart Programme chart Programme Fabric type maximum Special notes load COTTONS Multi-layered fabrics, not 5 kg Do not dry jersey wear in the Extra dry thoroughly dried with Extra dry programme – “Normal +” tendency to shrink. Mixed load of cotton fabrics, 5 kg –... - Page 17 Programme chart Programme Fabric type Maximum Special notes load MINIMUM IRON Minimum iron items which are 2.5 kg Spin minimum iron fabrics for at Normal+ made of synthetics or blended least 30 seconds in the fabrics, (eg pullovers, washing machine before drying dresses, trousers) which are not dried adequately in the “Normal”...
-
Page 18: Display
Display Display Various pieces of information are Each load should ideally be made shown in the display: up of items of the same size. The - the length of time a programme still time left will vary more if items are of has to run (time left);... -
Page 19: Delay Start
Delay start Delay start To cancel delayed start Once a programme has been se- lected, the start can be delayed from Press the "Delay start" button re- 30 minutes (30) up to 24 hours (24h). peatedly until 24h appears in the dis- play. -
Page 20: Altering A Programme
Altering a programme Altering a programme To open the door during a pro- Once a programme has started, no programme change or additional op- gramme to add or remove tions will be accepted. garments If the programme selector is turned to Cancel the programme by: a different programme after a pro- Pressing the “Door”... -
Page 21: Electronic System Lock
Electronic system lock Electronic system lock The system lock prevents anyone from interfering with the dryer. To activate the system lock Ensure that the door is closed and that the programme selector is turned to “Finish”. Turn the machine on. Press the “Anti-crease”... -
Page 22: Programmable Functions
Programmable functions Programmable functions Programmable function 03: “Mem- Notes ory” The programmable functions can be The additional options chosen for the used to create drying programmes to last drying programme are stored in suit your individual requirements. the machine’s memory. They will remain in the machine’s memory until cancelled. -
Page 23: Activating And Storing In The Memory
Programmable functions The number of the programmable Activating and function will flash in the display, alter- storing in the memory nating with the “P”. Example: The programmable functions are acti- 0i0... P 0... 0i0... P 0..vated using the additional option but- tons in special combinations with the The number on the right will show con- programme selector to introduce... -
Page 24: Cleaning And Care
A cleaning brush is Never use abrasive substances, available at extra cost from the Miele scouring pads, glass or general pur- Spare Parts Department. pose cleaners. These could damage Push the cleaned filter back into the plastic surfaces and other parts. -
Page 25: Emptying The Condensed Water Container
Cleaning and care Emptying the condensed water container If the hose drain has not been fitted and connected, the condensed water will be collected in the condensed water container. The condensed water container should be emptied after every drying cycle, or as soon as the “Empty out container”... -
Page 26: Cleaning The Condenser Unit
Cleaning and care Cleaning the condenser unit The machine must be disconnected from the electricity supply before cleaning. The condenser unit should be cleaned at least four times a year. Open the door. Pull the cover off. Turn the cover lock downwards to the vertical position. - Page 27 Cleaning and care Pull the condenser unit out. Clean the two long sides of the unit. Stand the condenser unit lengthwise on a towel until it is quite dry. Replace the condenser unit (see il- lustration above left). Return both levers on the condenser unit to the horizontal position.
-
Page 28: Problem Solving Guide
– Has the fuse or circuit breaker tripped? If so, contact the Miele Service Department. Static charge can be reduced . . . items made of synthetic by adding a fabric conditioner... - Page 29 Problem solving guide What to do if . . . Cause . . . Remedy . . . Ventilation to and from the dryer Open a door or window while . . . drying process goes on is insufficient (eg in a small the machine is in operation for too long.
- Page 30 (frozen condensed water). If the light continues to flash there is a problem. Contact Miele Service Department. The condensed water container Empty the container..the “Empty out container” is full.
- Page 31 Problem solving guide Check and indicator lights: What to do if . . . Cause . . . Remedy . . . This is not a fault. See the “Display” section..once the programme has started the following symbols appear in the display: "=== ...
- Page 32 Before changing the bulb, discon- The temperature resistant bulb should nect the machine from the mains only be ordered from your Miele dealer power supply. or the Miele Spare Parts Department. Opening the door in the event of a power failure.
-
Page 33: After Sales Service
– your Miele dealer When, for example, new programmes are developed or new fabrics are intro- – your nearest Miele Service Depart- duced, a service engineer will be able ment (see back cover for the ad- to modify existing programme cycles dress). -
Page 34: Installation
The tumble dryer can also be com- bined with a Miele washing machine in a washer and dryer stack. For this pur- pose the appropriate stacking kit* and special accessories* are required. -
Page 35: Installation
– For installation under a work surface 900/910 mm or 950/960 mm from the floor, one or two spacer frames are required respectively. Spacer frames complete with fitting in- structions are available from Miele Dealers and the Miele Spare Parts De- partment. -
Page 36: Adjusting The Adapter Strips To The Height Of Adjacent Drawers
The height of the adapter can be ad- rounding units. justed in one of two ways: If the unit is fitted in a Miele kitchen, a – by altering the position of the nuts or front panel with the appropriate dimen- sions and the necessary holes pre- –... - Page 37 Installation Fix the front panel with the rest of the screws supplied and the hinge screws. Stick the template down with ad- hesive tape. There are two ways of fixing the front panel: Option 1 Drill all the holes for the inner door panel to the given depths.
- Page 38 Installation Option 2 Drill the numbered free holes and screw points for the inner door panel to the given depth. On chipboard fronts: free holes (= dia. 10 mm), inject the silicone sealant sup- plied into the holes. Please note that some different holes are used for a left or right hand door.
-
Page 39: Fitting The Plinth Facia
Installation Fitting the plinth facia Fitting the plinth facia: Place the small template supplied on – The appliance plinth below the door the back of the upper edge of the can be concealed using a plinth plinth facia and fasten with sticky facia. -
Page 40: External Condensed Water Outlet
Installation External condensed water out- The condensed water can be drained off directly if the machine is installed near a sink, drain outlet etc. Maximum drain hose length: 3.00 metres Maximum delivery head: 1.00 metre Accessories supplied: – 2 metre drain hose –... - Page 41 Installation The dryer is fitted with a non-return Connection to wash basin drain out- valve as standard to prevent water from let (where appropriate) flowing back into the machine. Push the hose clip (1) and the knurled nut connector from the sink drain outlet (2) over the drain hose.
-
Page 42: Electrical Connection
Electrical connection Electrical connection The wire which is coloured blue must Electrical connection U.K. be connected to the terminal in the All electrical work should be carried out plug which is marked with the letter N only by a suitably competent person, in or coloured black. -
Page 43: Consumption Data
Consumption data Consumption data Programme Cap- Final spin speed Electricity Drying time incl. acity (in a domestic consump- cooling down time washing machine) tion Minutes 10 A 16 A COTTONS 1200 Extra dry 1400 1600 1200 Normal + 1400 1600 800 (70 % residual moisture) Normal 1200... -
Page 44: Technical Data
Technical data Technical data Height......820 mm (adjustable +10/-5 mm) Width ......595 mm Depth . - Page 48 Alteration rights reserved/001 2298 This paper consists of cellulose which has been bleached without the use of chlorine.