Related Manuals for Miele TMG 440 WP
Summary of Contents for Miele TMG 440 WP
-
Page 1: Operating Instructions
Operating instructions for heat pump dryers To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 09 696 900... -
Page 2: Caring For The Environment
Caring for the environment Disposal of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The packaging is designed to protect the appliance from damage during – Make sure that your laundry is transportation. -
Page 3: Table Of Contents
Contents Caring for the environment .................. 2 Warning and Safety instructions ................. 6 Operating the tumble dryer................. 16 Control panel......................16 Display........................17 Before using for the first time................19 EcoFeedback......................20 1. Notes on correct laundry care................ 21 Points to note regarding washed laundry.............. 21 Preparing the laundry before drying.............. - Page 4 Contents Removing visible fluff..................40 Cleaning the fluff filters and air flow openings thoroughly........ 41 Plinth filter......................42 Removing the plinth filter.................. 42 Cleaning the plinth filter..................42 Cleaning the plinth filter panel................43 Checking the heat exchanger................43 Replacing the plinth filter.................. 44 Fragrance flacon....................
- Page 5 Contents Technical data ..................... 75 Settings menu...................... 76 Calling up settings....................76 Language ......................76 Drying levels ......................77 Extended cool down....................77 Airways indicator....................77 Buzzer volume ...................... 78 Keypad tone......................78 Conductivity......................78 Total consumption....................78 Code........................79 Display brightness ....................
-
Page 6: Warning And Safety Instructions
If using dry cleaning kits, do so at your own risk, and follow the instructions provided on the packaging. Any other applications may be dangerous. Miele cannot be held liable for damage resulting from incorrect or improper use or operation. - Page 7 Warning and Safety instructions This tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are supervised whilst using it or have been shown how to use it in a safe way and understand and recognise the consequences of incorrect operation.
- Page 8 It is essential that this standard safety requirement is met. If in any doubt, please have the household wiring system tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g.
- Page 9 This tumble dryer must not be used in a non-stationary location (e.g. on a ship). Do not make any alterations to the tumble dryer, unless authorised to do so by Miele. Heat pump technology and refrigerant: The heat pump in this tumble dryer uses a refrigerant which is...
- Page 10 Warning and Safety instructions Please observe all instructions given in "Installation and connection" and in "Technical data". The accessibility of the plug must be always ensured, in order to separate the tumble dryer from the mains. Do not block the gap between the bottom of the tumble dryer and the floor with plinth facings, deep pile carpet etc.
- Page 11 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – Items which have not been washed. – Items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
- Page 12 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – Items which have been cleaned using chemicals (e.g. professional dry-cleaning agents). – Fabrics which contain a large proportion of rubber, foam rubber or rubber-like materials.
- Page 13 Warning and Safety instructions The tumble dryer must not be used without fluff filters or – with damaged fluff filters – with a damaged plinth filter. This would cause an excessive build-up of fluff which in turn would cause a fault. ...
- Page 14 Warning and Safety instructions Using a fragrance flacon (optional accessory) Only use genuine Miele original fragrance flacons. The fragrance flacon must be stored in its packaging so please make sure you retain this. Caution. The fragrance can run out of the flacon. Make sure that...
- Page 15 If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated. The tumble dryer can also be combined with a Miele washing machine in a washer-dryer stack. The appropriate "WTV" stacking kit (available to order) to match your dryer is required.
-
Page 16: Operating The Tumble Dryer
Operating the tumble dryer Control panel a Display with sensors f Option buttons See the following page for more Various options can be added to the information. programmes. b Start/Stop button g Programme selector For starting the programme selected For selecting the programme. and cancelling a programme once it h Optical interface has started. -
Page 17: Display
Operating the tumble dryer Display Settings can be changed to alter the dryer's electronics to suit different requirements. Please refer to "Settings menu" at the end of this booklet for more information. The following programmes are selected using the programme selector at the "Further programmes"... - Page 18 Operating the tumble dryer Perfect Dry indicator Examples on how to operate the appliance With programmes with a selectable drying level, the Perfect Dry system Scrolling through a list calculates the residual moisture present The arrows in the display indicate in the laundry to ensure a precise that a selection is available: drying result.
-
Page 19: Before Using For The First Time
When the tumble dryer is switched on the welcome display Miele Willkommen will appear briefly. Setting the language You will be asked to select the language you want for the display. It is possible to change the language at any time via Settings. -
Page 20: Ecofeedback
EcoFeedback You can use the EcoFeedback sensor 2. Actual consumption to call up information about the energy Touch the EcoFeedback sensor. consumption of your dryer. You can view the actual amount of Touching the EcoFeedback sensor will energy used. call up two types of information: Example: –... -
Page 21: Notes On Correct Laundry Care
1. Notes on correct laundry care Points to note regarding See "Warning and Safety" washed laundry instructions for further information. Loading or using the tumble dryer – When washing very heavily soiled incorrectly could cause a fire. items ensure that you use sufficient detergent and select a high –... -
Page 22: Garment Care Label Symbols
1. Notes on correct laundry care Garment care label symbols – Down-filled garments have linings which have a tendency to shrink, Drying depending on the quality of the item. They can be partially dried using the Normal/higher temperature Gentle smoothing programme. ... -
Page 23: Load The Tumble Dryer
2. Load the tumble dryer When closing the door make sure It is essential to read "1. Notes that laundry does not get trapped in on correct laundry care" first of the door opening. all. This could damage the laundry. ... -
Page 24: Select A Programme And Start It
3. Select a programme and start it Select a programme Further programmes The further programmes can be selected via the display. Turn the programme selector. Different programmes and setting options will light up in the display, Automatic plus depending on the position of the programme selector. - Page 25 3. Select a programme and start it Programmes with drying levels Other programmes and the timed drying programmes – Cottons, Minimum iron, Delicates, Denim, Shirts, Express, Gentle – Cottons , Woollens handcare, smoothing, Steam smoothing, Silks handcare, Proofing Automatic plus, Sportswear, The programme duration is pre-set Outerwear and cannot be altered.
-
Page 26: Select Any Options Or Delay Start (If Required)
3. Select a programme and start it Select any options or delay Drying and the programme duration will light up in the display. The drying level start (if required) reached will light up instead of Drying later on, during programmes with a Options selectable drying level. -
Page 27: Remove The Laundry
4. Remove the laundry End of programme/Anti-crease Check that all items have been removed from the drum. At the end of the programme: Anti- If items are left in the dryer, they crease/Finish (if anti-crease has been could be damaged by overdrying selected) or Finish will light up. -
Page 28: Options
Options odours will not be removed as effectively from parts of garments made of synthetic fibres. Auto load control This option should be used if you only want to dry half the load given in the display and quoted in the "Programme chart". - Page 29 Options The following options can be selected in addition to the programme: Gentle Freshen Auto load Anti- Buzzer crease tumble control – – – Cottons Cottons Minimum iron – – – – Woollens handcare – – – Steam smoothing –...
-
Page 30: Delay Start
Delay start To select delay start To begin delay start With delay start you can delay the start Press the Start/Stop button. of the programme by up to a maximum The display will show the delay start of 24 hours. time counting down in hours and ... -
Page 31: Programme Overview
Programme overview Cottons ** Max. load 8.0 kg* Use for Cotton items such as those described under Cottons Normal with normal residual moisture. Note – Items are dried to a Normal level only. – The Cottons programme is the most energy-efficient for drying cotton items with normal residual moisture levels. -
Page 32: Woollens Handcare
Programme overview Woollens handcare Max. load 2.0 kg* Use for Woollen garments and fabric containing wool blends, e.g. pullovers, jackets. Note – Wool and wool blend items are only fluffed up; they are not dried completely. – Remove garments as soon as the programme has finished and leave to finish drying at room temperature. -
Page 33: Warm Air
Programme overview Warm air Max. load 8.0 kg* Use for – Multi-layered fabrics whose layers have different drying characteristics, e.g. jackets, pillows, sleeping bags and other voluminous items. – Drying individual items, e.g. bath towels, swimwear, tea-towels and small loads. Note Do not select the longest drying time to start with. -
Page 34: Proofing
Programme overview Proofing Max. load 2.5 kg* Normal Use for Drying microfibre fabric, skiwear, outerwear, fine, closeweave cotton garments (poplin) or tablecloths which are suitable for drying in a tumble dryer and have been treated to provide a water and dirt resistant finish. -
Page 35: Silks Handcare
Programme overview Silks handcare Max. load 1.0 kg* Use for Silk garments which are suitable for drying in the tumble dryer, e.g. blouses and shirts Note – This programme reduces creasing. Items are not dried completely by this programme. – Remove garments as soon as the programme has finished and leave to finish drying at room temperature. -
Page 36: Sportswear O
Basket programme Max. load for basket 3.5 kg Notes – This programme may only be used with the Miele drying basket (optional accessory) fitted. – Use this programme to dry or air items which are suitable for drying in a tumble dryer but which are not suitable for drying using mechanical action. -
Page 37: Changing The Programme Sequence
Changing the programme sequence You cannot change to another Adding or removing laundry programme once a programme has after a programme has started started (this prevents unintentional Press the Start/Stop button. alterations). Cancel programme will light up in the If you move the programme selector, display. -
Page 38: Cleaning And Care
Cleaning and care Emptying the condensed water To prevent water running out, hold it at the front and towards the back and container keep it in a horizontal position when carrying it. The condensed water is collected in the condensed water container. Empty the condensed water container after every drying programme. -
Page 39: Preparing The Condensed Water Container For Steam Smoothing
Cleaning and care Preparing the condensed water container for Steam smoothing Condensed water which has collected in the condensed water container is directed into the drum in the Steam smoothing programme. The condensed water container must therefore be filled with water up to at least the –min–... -
Page 40: Fluff Filters
Cleaning and care Fluff filters This tumble dryer has 2 fluff filters in the door opening: the upper and lower fluff filters trap fluff produced during the drying process. Removing visible fluff Remove any fluff after every drying cycle. You can also use a vacuum cleaner so that you can remove the fluff without ... -
Page 41: Cleaning The Fluff Filters And Air Flow Openings Thoroughly
Cleaning and care Cleaning the fluff filters and air flow Hold the dial and pull the fluff filter openings thoroughly forwards to remove it. If the drying duration has become longer or the surface of the filters is visibly compacted with fluff, you should carry out the following cleaning procedure. -
Page 42: Plinth Filter
Cleaning and care Plinth filter Removing the plinth filter will cause the right hand guide pin in the dryer to Only clean the plinth filter when come out. This pin ensures that the Clean out airways lights up. heat exchanger access panel can only be closed if the plinth filter is inserted To delete Clean out airways: Switch the the right way round. -
Page 43: Cleaning The Plinth Filter Panel
Cleaning and care Cleaning the plinth filter panel Checking the heat exchanger Danger of injury. Do not touch the cooling fins. You could cut yourself. Look to see if fluff has accumulated. If there is visible soiling: Clean using a vacuum cleaner with a dusting brush attached. -
Page 44: Replacing The Plinth Filter
First insert the handle with the plinth filter attached over the two guide pins. – The word Miele on the handle must be the correct way up. Push the plinth filter in completely. The act of pushing in the plinth filter will... -
Page 45: Tumble Dryer
Cleaning and care Tumble dryer Disconnect the tumble dryer from the mains electricity supply. Do not use solvents, abrasive cleaners, glass cleaners or all- purpose cleaners. These could damage plastic surfaces and other parts. Clean the tumble dryer with a slightly damp cloth and a mild non-abrasive cleaning agent or a solution of washing-up liquid and water. -
Page 46: Fragrance Flacon
Fragrance flacon Using a fragrance flacon (optional accessory) will add a pleasant fragrance to your laundry. Before using a fragrance flacon, please read "Warning and safety instructions - Using a fragrance flacon (optional accessory)". Inserting a fragrance flacon Only hold the fragrance flacon as illustrated. -
Page 47: Before Drying
Fragrance flacon – You will feel a slight resistance and Markers and must line up with hear a soft click. one another. Marker must be in position : this is the position at which you can feel a resistance. -
Page 48: Replacing The Fragrance Flacon
Replace the fragrance flacon with a original packaging until you want to new one. use it again. See the following section. Fragrance flacons are available to order from Miele or online at www.miele-shop.com. -
Page 49: Cleaning The Fluff Filters
Fragrance flacon – when purchasing new fragrance flacons: only remove the protective seal just before use Cleaning the fluff filters The intensity of the fragrance will be diminished if the fluff filters and the plinth filter are not cleaned. The fragrance filter must be removed before cleaning the fluff filter. -
Page 50: Problem Solving Guide
Switch the dryer off and then on again. lights up after a Start a programme. programme is cancelled If the programme is cancelled again and an error message appears, there is a fault. Contact the Miele Service Department. - Page 51 Problem solving guide Problem Cause and remedy lights There is a build-up of fluff in the airways. Clean out airways Clean the fluff filters. up at the end of a Clean the plinth filter. programme See "Cleaning and care". To switch off the message: ...
-
Page 52: Unsatisfactory Drying Results
Problem solving guide Unsatisfactory drying results Problem Cause and remedy The laundry is not The load consisted of different types of fabric. sufficiently dry Finish drying using the Warm air timed drying programme. Select a different programme next time. Tip: You can alter the residual moisture level for some programmes. -
Page 53: Other Problems
Problem solving guide Other problems Problem Cause and remedy The drying process The room in which the dryer is located is too warm. goes on too long or Ventilate the room thoroughly. even switches off * Detergent residues, hair and fine fluff can clog the filters. - Page 54 Problem solving guide Problem Cause and remedy There are humming This is not a fault. noises The compressor (heat pump) is operating or you have selected the Steam smoothing programme. No action is required. These noises are quite normal and can be heard when the compressor or the condensed water pump is operating.
-
Page 55: Bottom Right Grille
Problem solving guide Bottom right grille Danger of injury. Do not touch the cooling fins. You could cut In general, the cooling fins yourself. behind the grille on the bottom right do not need cleaning. They should Use a vacuum cleaner with a only be cleaned if the drying process dusting brush attached to clean the... -
Page 56: Fluff Filter In The Condensed Water Container
Problem solving guide Fluff filter in the condensed water container If you are experiencing problems running the Steam smoothing programme, the fluff filter at the end of the hose which is connected to the rubber seal in the condensed water container could be blocked. ... -
Page 57: Steam Smoothing Spray Jet
Problem solving guide Steam smoothing spray jet Open the door of the tumble dryer. The spray jet is located in the top left of Limescale deposits will impair the door opening. the spray jet. In this case, the spray jet must be removed and replaced with a new one (see "Accessories"). -
Page 58: After Sales Service
In the event of any faults which you Optional accessories and replacement cannot remedy yourself, please contact spare parts for this tumble dryer are your Miele dealer or the Miele Service available from Miele, your Miele dealer Department. or via the internet at: Contact details for Miele are given at the end of this booklet. -
Page 59: Installation And Connection
Installation and connection Front view a Mains connection cable e Heat exchanger access panel – do not open during drying b Control panel f Four height adjustable screw feet c Condensed water container – empty after every drying cycle g Cool air intake grille –... -
Page 60: Rear View
Installation and connection Rear view If transporting the dryer dryer on its side, only tip towards the left side. a Protruding lid for holding when moving the dryer (see arrows) b Accessories for external drainage of condensed water: hose clip, adapter and hose holder c Hose for external drainage of condensed water... -
Page 61: Installation
Installation and connection Installation Ventilation The cool air intake at the front of Levelling the dryer the dryer must not be blocked or Make sure the dryer door can be covered. This would hinder a opened without hindrance after sufficient intake of cool air for the installation. -
Page 62: Additional Installation Requirements
– Drying durations may increase slightly. Optional accessories – Washer-dryer stack The tumble dryer can also be combined with a Miele washing machine in a washer-dryer stack. The appropriate Miele washer-dryer stacking kit is required. – Plinth The tumble dryer can be fitted on a... -
Page 63: External Condensed Water Outlet
Installation and connection External condensed water Installation conditions requiring a non-return valve outlet There is a risk of back-flow into Notes the dryer if a non-return valve is not When drying is in progress, fitted. condensed water is pumped into the Back-flow could damage the dryer condensed water container through and also the room in which it is... -
Page 64: Arranging The Drain Hose
Installation and connection Arranging the drain hose Do not pull on the drain hose and do not stretch it or allow it to become kinked. This could damage the hose. There will be a small amount of residual water left in the drain hose. Have a container ready to collect this. -
Page 65: Examples
Installation and connection Examples Direct connection to a sink drain outlet – Drainage into a sink or floor gully Use the hose holder to prevent the drain hose from becoming kinked. Remove the following from the back of the dryer at the top: Adapter 1 and hose clip 3 behind it. - Page 66 Installation and connection Fit adapter 1 to the sink drain outlet using nut 2. The nut is usually fitted with a washer which must be removed. Attach the end of the hose 4 to adapter 1. Use the hose holder. ...
-
Page 67: Changing The Door Hinging
Installation and connection Changing the door hinging Hold the door securely and pull it forwards: to remove the door you will You can change the door hinging on need to pull the base plate of the this tumble dryer yourself. hinge with its 2 pins out of the dryer. - Page 68 Installation and connection Turn the door lock through 180°. 3. Remove the lock catch from the door Press the door lock into openings First take the rubber seal off the door on the opposite side of the door and place this to one side.
- Page 69 Installation and connection 4. Dismantle the door hinge from the door The door hinge cover must be unclipped from position and then removed. Remove the lock catch from the cover. This lock catch cover is no longer needed, however, please keep it in a safe place.
- Page 70 Installation and connection 5. Change over the door hinge on the Use the screwdriver to guide first one door then the other rod to the middle until each can be removed. The door hinge is secured to the door In some circumstances, the rods can with 2 angled rods.
- Page 71 Installation and connection 6. Change the lock catch on the door You now need the new door hinge cover supplied with the dryer. You now need the new lock catch cover supplied with the dryer which you have already fitted with the lock catch.
-
Page 72: Refitting
Installation and connection Refitting Now that you have changed the door hinging the door will open from the 7. Refit the door opposite side. Press the rubber seal back into the grove on the door. Push the orange marker round to the other side so that you will see at ... - Page 73 Installation and connection Electrical connection U.K. Non-rewireable plugs BS 1363 All electrical work should be carried out The fuse cover must be refitted when by a suitably qualified and competent changing the fuse, and if the fuse cover person, in strict accordance with is lost, the plug must not be used until current national and local safety a suitable replacement is obtained.
-
Page 74: Consumption Data
Consumption data Final spin speed in a Residual Energy Duration Load domestic washing moisture machine 1000 2.14 Cottons 1000 1.28 Cottons Normal 1200 1.90 1400 1.80 1600 1.60 Cottons Normal + Gentle tumble 1000 2.19 Cottons Hand iron 1000 1.52 1200... -
Page 75: Technical Data
Technical data Height 850 mm Width 596 mm Depth 643 mm Depth with door open 1077 mm Suitable for pushing under a worktop Suitable for stacking Weight 61.5 kg Drum volume 120 litres Load size 1.0-8.0 kg (weight of dry laundry) Capacity of condensed water container 4.8 l Hose length 1.60 m... -
Page 76: Settings Menu
Settings menu Calling up settings Changing a setting Touching the or sensor will call You can use the Settings menu to alter up the different options for the the dryer's electronics to suit different setting. requirements. Settings can be altered For example, you can at any time. -
Page 77: Drying Levels
Settings menu Drying levels Airways indicator You can alter the drying levels for the Fluff should be removed after drying. Cottons, Minimum iron and Automatic The Clean out airways message will plus programmes. remind you to clean the filters when a certain amount of fluff has collected in The setting selected is shown in a bar them. -
Page 78: Buzzer Volume
Settings menu Buzzer volume Important This option should not be activated if, The buzzer can be set to be louder or despite the water being extremely soft quieter. (as would be the case if a water softener were used), its conductivity is The setting selected is shown in a bar greater than 150 μS. -
Page 79: Code
If you forget the code, the – Off dryer will need to be unlocked by the The display will remain on (i.e. it will Miele Service Department. never go out). You can switch the display and buttons Display brightness back on again by pressing any button. -
Page 80: Appliance Switch-Off
Settings menu Appliance switch-off Anti-crease To save energy the dryer will switch If you have pressed the Anti-crease off automatically after 15 minutes. You button: can lengthen or shorten the time. the drum will continue to rotate in a special anti-crease rhythm for a The dryer will switch off after 10, 15 or maximum of 2 hours after the end of 20 minutes,... - Page 84 TMG 440 WP en-GB M.-Nr. 09 696 900 / 00...