CONTENTS Safety precautions……………………………………………………………..……………3 TV block diagram……………………………………………………………………..…….4 Replacement of memory IC………………………………………………………….……5 Service adjustment……………………………………………………………..…………...5 ICs functional description…………………………………………………………………8 Test point waveform………………………………………………………………………10 All ICs voltages……………………………..……………………………………………….10 Purity / convergence adjustment………………………………………………………11 DVD maintenance…………………………………………………………………………13 10. List of Parts ………………………………………………………………………….…….14 11. Exploded view…………………………………………………………………Attached Circulate diagram…………………………………………………………………Attached PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.com.cn...
1. SAFETY PRECAUTIONS The design of this product contains special hardware, many Isolation Check circuits and components especially for safety purposes. For (Safety for Electrical Shock Hazard) continued protection, no changes should be made to the After re-assembling the product, always perform an isolation original design unless authorized in writing by the check on the exposed metal parts of the cabinet (antenna manufacturer.
3. REPLACEMENT OF MEMORY IC 1. MEMORY IC. This TV uses memory IC. In the memory IC are memorized data for correctly operating the video and deflection circuits. 2. PROCEDURE FOR REPLACING MEMORY IC (1) Power off Switch the power off and unplug the power cord from AC outlet. (2) Replace IC Be sure to use memory IC written with the initial data values.
Page 6
Adjustable Items Direct access key Items Description Preset Remark “1” 5/6HSH Horizontal shift “2” 5/6VSL Vertical slop 5/6VAM Vertical amplitude 5/6SCL S-correction 5/6VSH Vertical shift 5/6VOF OSD Vertical offset HOF* OSD Horizontal offset “3” Black level offset R Black level offset G White point R White point G White point B...
Page 7
2. OP2 Function Description Preset Remark Bit 7 Ident sensitive PAL 1=21dBμV 0=26dBμV Bit 6 TILT 1=Enable Bit 5 1=Enable Bit 4 1=Enable Bit 3 RESERVE Bit 2 FMWS 1=Enable Bit 1 RESERVE Bit 0 1=Enable 3. OP3 Function Description Preset Remark Bit 7...
5. ICs functional description 1. N501 UOC TDA8377 SYMBOL DESCRIPTION STAND BY output. In STAND BY mode, low level (Power OFF). For Power ON this pin will be high. C-bus clock line C-bus data line TUNING tuning Voltage (Vt) PWM output Control keys input SYSTEM TV system control...
Page 9
RESET Ground VDDP Digital supply to periphery (+3.3 V) P1.0/INT1 AV1 / AV2 mode Output. P1.1/T0 AV /S-VHS mode Output. P1.2/INT0 Remote control signal input. Note SVHS 2. N902 24C08/PCF8598 Function Upper resistance SDA data wire SCL clock wire +5V Power 3.
8. PURITY / CONVERGENCE ADJUSTMENT PURITY ADJUSTMENT WEDGE Demagnetize CRT with the demagnetizer. DEFLECTION YOKE Loosen the retainer screw of the deflection yoke. Remove the wedges. Input a green raster signal from the signal generator, and turn the screen to green raster. Move the deflection yoke backward.
Page 12
STATIC CONVERGENCE ADJUSTMENT 1. Input a crosshatch signal. 2. Using 4-pole convergence magnets overlap the red and blue lines in the center of the screen (Fig. 1) and turn them to magenta (red/blue). (FRONT VIEW) 3. Using 6-pole convergence magnets overlap the magenta (red/blue) and green lines in the center of the screen and turn them to white.
Page 16
0094100029 R211 CARBON FILM RESISTOR RT13-1/6W-4.7K-J------T 0094100029 R212 CARBON FILM RESISTOR RT13-1/6W-4.7K-J------T 0094101328 R215 CARBON FILM RESISTOR RT13-1/6W-3.3K-J------T 0094101328 R266 CARBON FILM RESISTOR RT13-1/6W-3.3K-J------T 0094101328 R247 CARBON FILM RESISTOR RT13-1/6W-3.3K-J------T 0094101328 R220 CARBON FILM RESISTOR RT13-1/6W-3.3K-J------T 0094101328 R278 CARBON FILM RESISTOR RT13-1/6W-3.3K-J------T 0094101328 R747...
Page 17
0094100132 R254 CARBON FILM RESISTOR RT13-1/6W-180Ω-J--T52 0094100020 R264 CARBON FILM RESISTOR RT13-1/6W-470Ω-J--T52 0094101595 R807 REAL CHIP REISTOR RI40-1/2W-12MΩ-J-T52 0094100103 RX801 REAL CHIP REISTOR RS11-1/2W-3.3M-K------T 0094100106 R260 METAL FILM RESISTOR RJ13-1/6W-9.1K-J------T 0094100106 R262 METAL FILM RESISTOR RJ13-1/6W-9.1K-J------T 0094102210 R259 METAL FILM RESISTOR RJ13-1/6W-100K-J------T 0094101159 R228...