Page 1
HUAWEI HG655a Home Gateway Quick Start 1 Introduction 1.1 Contents in the package HG655a Splitter Power Adapter Telephone Cables Ethernet Cable User CD-ROM General Public Warranty Card License...
Page 2
Four LAN indicators: LAN1, LAN2, LAN3, LAN4 One VoIP indicator: VOIP 1.3 The Rear Panel of the HG655a The rear panel of the HG655a provides the following interfaces and buttons: One ADSL interface: DSL Two RJ-11 phone interfaces: PHONE1, PHONE2...
2 Installation Guide To connect the cables for installing the HG655a, do as follows: Telephone jack on the wall Splitter Telephone Set-top box Power adapter...
Page 4
Connect the telephone to the PHONE interface on the splitter with a telephone cable. PHONE LINE Step 2 Connect the DSL interface on the HG655a to the MODEM interface on the splitter with a telephone cable.
Page 5
2.2 Connecting telephones to the HG655a Connect a telephone to the PHONE1 or PHONE2 interface of the HG655a. The connection methods are as follows: If you have two VoIP numbers, you can connect two telephones to the PHONE1 and PHONE2 interfaces respectively.
Page 6
2.4 Supplying Power to the HG655a Connect the power adapter to the power interface on the back of the HG655a and plug the power adapter into a wall outlet. After you power on the HG655a, the DSL indicator blinks (for less than three minutes), which indicates that the HG655a is being activated.
Page 7
3 Configuring the HG655a You can access the Internet by use the following two methods: Using the Embedded PPP Dial-Up Software of the HG655a to Get Online Using the PPP Dial-Up Software of the Computer to Get Online Please use the parameters provided by your internet service provider (ISP) for configuration.
Page 8
Configure the HG655a to work in the bridge mode For details, refer to the Step 3 in section "Using the Embedded PPP Dial-Up Software of the HG655a to Get Online." Note that Bridge is selected from the Connection mode drop-down combo box.