Operating Instructions Dishwasher G 4220 G 4225 en - US To prevent accidents and appliance damage read these instructions before installation or use. M.-Nr. 09 510 191...
Page 4
If the supplied power cord is appliance as specified in these damaged it must only be replaced by a operating instructions, for cleaning Miele Service technician with a genuine domestic cookware and cutlery. Any Miele power cord. other usage is not supported by the manufacturer and could be dangerous.
Page 5
Do not install this dishwasher beneath a cooking surface, oven or any Installation and repair work should appliance that radiates heat. be performed by a Miele authorized High temperatures from these units service technician. Work by unqualified may damage the dishwasher.
Page 6
IMPORTANT SAFETY INSTRUCTIONS Do not inhale or swallow detergents. Dishwasher detergents contain irritant To reduce the risk of injury, do not and corrosive ingredients. They can allow children to play in, on or near the cause burning in the mouth and throat if dishwasher.
Guide to the dishwasher Upper spray arm (not visible) Triple filter system Cutlery tray Data plate Upper basket Child Safety Lock in the door handle (not visible) Middle spray arm Rinse aid reservoir Air inlet for drying (depending on model) Dual compartment detergent dispenser Lower spray arm...
Guide to the dishwasher Control panel Program selection Delay start button with indicator light Time display Turbo button with indicator light Check / Refill indicators Program button K button (On/Off) Start/Stop button with indicator light This operating instruction manual describes several dishwasher models with different indicated settings.
Caring for the environment Energy saving washing Disposal of the packing material This dishwasher is economical in the use of water and electricity. For best The cardboard box and packaging results follow these tips: protect the appliance during shipping. These materials are biodegradable and ^ For lowest energy consumption you recyclable.
Before using for the first time To open the door Child Safety Lock ^ Press the release catch inside the The Child Safety Lock is designed to prevent children from opening the door grip. dishwasher. If the door is opened during operation, ^ To lock the door, push the slider the dishwasher will stop running.
Before using for the first time Rinse aid Rinse aid is needed to prevent spotting on dishes and glassware. The rinse aid is filled in the reservoir and the set amount will be automatically dosed. Filling the rinse aid reservoir with detergent will damage the reservoir.
Before using for the first time Deactivating refill indicators The flashing in the time display indicates whether the refill indicators If you consistently use Tab detergents, are activated or not. you can deactivate the refill indicator if – "p 1": refill indicators are activated you wish.
Before using for the first time ^ Press the K button to turn the Setting the rinse aid dosage dishwasher off. You can adjust the rinse aid dosage to ^ Press and hold the Start/Stop button optimize the results. and simultaneously turn the The rinse aid dosage can be set at dishwasher on using the K button.
Loading the dishwasher ^ The spray arms must not be blocked Do not wash items soiled with by items that are too tall or hang ash, sand, wax, grease or paint in through the baskets. Check the dishwasher. clearance by manually rotating the Ash and sand do not dissolve and spray arms.
Loading the dishwasher Items not recommended for Glassware: dishwashing – There are no standard guidelines for washing glassware, when in doubt – Cutlery with wooden handles wash by hand. – Wooden cutting boards – When purchasing new dishes, – Glued items such as old knives with glasses and cutlery, make sure they handles glued together around the are dishwasher safe.
Loading the dishwasher Upper basket Adjustable cup rack (depending on model) Always use the dishwasher with ^ Raise the rack to make room for tall the upper and lower basket in place. glasses. Glasses can also be leaned against the cup rack so they are more stable.
Page 21
Loading the dishwasher Adjusting the upper basket To adjust the upper basket downwards: ^ Pull up on the levers at the sides of In order to gain more space for taller items the upper basket can be adjusted the upper basket. on three levels with 2 cm between each ^ Adjust the basket to the desired level.
Loading the dishwasher Lower basket Heavily soiled items ^ Place larger and heavier items such as plates, serving platters, saucepans, bowls, etc. in the lower basket. It can also be used for glasses, cups, small plates and saucers. Dishwasher with cutlery tray ^ Place very large plates in the centre of the lower basket.
Loading the dishwasher Cutlery tray (depending on model) Spoons with thick handles may have to be placed as knives and forks with their heads in the holders. ^ Arrange the cutlery as shown in the cutlery tray. For easier unloading cutlery should be grouped in zones, one for knives, one for forks, one for spoons, etc.
Loading the dishwasher Cutlery basket Cutlery insert for the cutlery basket (depending on model) Use the insert supplied for heavily soiled items of cutlery. The insert separates the items so that they can be reached better by the spray jets. The cutlery basket can be placed anywhere on the front rows of spikes in the lower basket.
...wash long-stemmed glassware ... a glassware rack for the lower basket. MieleCare Collection Miele branded cleaning and care products, including dishwasher salt, detergent and rinse aid, are available to order from your Miele dealer, Miele or the on-line Miele store www.mieleusa.com...
Keep children away from the dishwasher when the door is Dishwasher cleaning products are open. There could still be detergent available from MIele. residues in the dishwasher. Only add detergent just before starting the program and lock the door with the child safety lock (depending on model).
Adding detergent ^ Add detergent to the compartments and close the container flap. ^ Press the latch on the detergent ^ Use one tab or add powder or gel dispenser. The flap will spring open. detergent to compartment II and The flap is always open at the end of a close the flap.
Turning on Starting a program ^ Make sure the spray arms can rotate ^ Press the Start/Stop button. freely. The program starts. The Start/Stop ^ Close the door. indicator light and the indicator light for the selected program come on. ^ Open the water supply if it is closed.
Program When to use Program sequence guide Pre-rinse Main Interim rinse Final Drying wash rinse Pots & Pans For normally soiled pots & pans with dried on food, and heavily soiled dishware, use 120% detergent recommended. Normal Program for as required completely washing a full load of normally soiled dishware with...
Time display Standby Before the program starts, the time A few minutes after the last button is display shows the runtime of the pressed or a few minutes after the end selected program in hours and minutes. of the program the dishwasher will The remaining time is displayed during switch to Standby mode to save the program.
At the end of a program The dishes will cool much faster if you open the door when the program has The program has ended if the time ended. display shows a 0. ^ Unload the lower basket first, then Now you can open the dishwasher and the upper basket and then the cutlery unload the dishware.
Interrupting a program Changing a program A program will be interrupted as soon Do not change the program if the as the door is opened. detergent dispenser flap is already When the door is closed again, the open. program will continue from where it was interrupted.
Additional options Turbo The Turbo function reduces the program runtimes in programs where the option is available. Energy consumption will increase to achieve optimum results. ^ Press the K button to turn the dishwasher on. The Start/Stop indicator light flashes. ^ Select the desired program.
Additional options ^ Press the K button to turn the Delay start dishwasher on. The start time of a program can be delayed. The start time can be delayed The Start/Stop indicator light flashes. from 30 minutes to 24 hours. The delay ^ Use the Program button to select the is set in 30 minute increments.
Page 35
Additional options The time will count down to the Starting a program before Delay start program start: for more than 10 hours in has elapsed: 1 hour increments, for less than 10 A program can be started before the hours in 1 minute increments. Delay start time has elapsed.
Additional options Memory The flashing in the time display shows whether Memory is turned on. The memory function allows you to save – "p 1": Memory is on. the last selected program. If you turn the dishwasher off and on –...
Additional options ^ Press the K button to turn the Optimize Standby dishwasher off. A few minutes after the last button is ^ Press and hold the Start/Stop button pressed or a few minutes after the end of the program the dishwasher will and simultaneously turn the dishwasher on using the K button.
Additional options Factory defaults The flashing in the time display shows whether a setting is different from the If you have changed any settings, you default setting. can reset them to the factory defaults. – "p 1": all values are set to the default ^ Press the K button to turn the settings dishwasher off.
If the indicator lights flash again, there is a technical fault. – Contact Miele. In addition, the drain Fault F70: – Close the water tap. pump may run even The waterproof system – Contact Miele . when the door is open. reports a fault.
Frequently asked questions Faults in the water intake or water drain Problem Possible fault Solution The Intake/Drain The water supply is Open the water supply all the indicator light closed. way. alternates between flashing and remaining steady. The dishwasher Before fixing the fault: stops running.
Frequently asked questions General problems with the dishwasher Problem Possible fault Solution Press the K button to The indicator lights The indicator lights and and the time display the time display turn off come out of Standby are dark. Only the automatically to save mode.
Frequently asked questions Noises Problem Possible fault Solution There is a knocking A spray arm is hitting the Interrupt the program and noise in the wash dishware. rearrange items blocking cabinet. the spray arms. There is a rattling Dishware is moving Interrupt the program and noise in the wash around in the wash...
Frequently asked questions Poor cleaning results Problem Possible fault Solution The dishes are The dishes were not loaded See "Loading the dishwasher". not clean. correctly. The program was not intensive Select a more intensive enough. program (see "Program guide"). Not enough detergent was Use more detergent, or switch dispensed.
Page 44
Frequently asked questions Problem Possible fault Solution Dishes are not dry, The rinse aid dosage is set Refill the reservoir, increase orglasses and too low or the rinse aid the dosage, or switch the cutlery are spotty. reservoir is empty. rinse aid product when refilling (see "Rinse aid").
Page 45
Frequently asked questions Problem Possible fault Solution Glasses have a Detergent deposits. Switch to another detergent brownish-blue right away. discoloration; the deposit cannot be wiped off. Glasses are dull and The glasses are not There is no remedy. discolored; the dishwasher-safe.
Miele products will not be recognized to input these into your machine by Miele. Our goal is to prevent controls via the indicator light marked unauthorized (and untrained) service PC. Miele will provide information when personnel from working on your Miele such possibilities become available.
Remove the cleaner promptly. The wash cabinet can be cleaned with a dishwasher cleaner such as "Dis To better maintain your appliance Cleaner" available from your Miele avoid the following: dealer or online at www.mieleusa.com. – cleaners containing soda, ammonia,...
Cleaning and Care Triple filter system The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones). During normal use, the filter system is self-cleaning.
Page 50
Cleaning and Care ^ Return the filter so it lies flat in the To clean the inside of the filter, the flap must be opened. base of the wash cabinet. ^ Push the clips together ^ Lock the filter by turning the handle and open the flap clockwise.
Cleaning and Care Cleaning the spray arms Sometimes particles of food get stuck in the spray arm jets. The spray arms should be inspected and cleaned every 4 - 6 months. ^ Turn off the dishwasher before cleaning. Removing the spray arms ^ Remove the cutlery tray (if present).
Cleaning and Care Cleaning the drain pump and non-return valve If the dishwasher is not completely drained at the end of a program, the drain pump or non-return valve may be blocked. ^ Turn off the dishwasher and pull the plug.
Installation Instructions Please refer to the Installation Diagram supplied with these instructions. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Technical Service Department: right side of the door. U 1-800-999-1360 V 1-800-565-6435 A damaged power cord must only be replaced with a genuine Miele cord by a Miele service technician. Specifications The dishwasher comes equipped with a GROUNDING INSTRUCTIONS 4 ft (1.2 m) power cord with a molded...
Page 55
Electrical connection Hardwired electrical connection Prior to making a hardwire It is possible to hardwire this appliance connection to the terminal, remove to an existing power cable. the power cord. Otherwise there will be a risk of electric shock from the CAUTION: Before servicing, attached plug.
Plumbing Connection to the water – Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar). supply – If the water pressure if lower, a Installation, repairs and other "Water Intake" notification will be work by unqualified persons could shown.
– Drain hose extensions and adapters pipe that is less than 8" (20 cm) above can be ordered from Miele. the floor, the drain must be vented. The maximum drain hose length is...
Noise measurement General requirements for measuring noise The dishwasher must be loaded with 16 place settings and the Normal program must be used. Installation requirements for measuring noise The dishwasher must be installed as follows:. ^ Install the dishwasher into an appropriate housing unit. ^ Secure the front panel.
Page 59
Noise measurement ^ Push the insulation mat supplied (depending on model) under the plinth until it is up against the appliance feet ^ Attach the toe-kick so that it is flush with the door front...
Page 60
Alteration rights reserved / 0213 M.-Nr. 09 510 191 / 00 G4220/G4225 / INFORMATION IS SUBJECT TO CHANGE. PLEASE REFER TO OUR WEBSITE TO OBTAIN THE MOST CURRENT PRODUCT SPECIFICATIONS, TECHNICAL & WARRANTY INFORMATION.