25cc/1.5 cu.in. 2-cycle 17 inch cutting path / 0.080 in. line gasoline weedwacker (13 pages)
Summary of Contents for Craftsman WEEDWACKER 358.745240
Page 1
Instruction Manual 4.5 Amp Motor 15 Inch Cutting Path/0.065 In. Line ELECTRIC WEEDWACKER ® Model No. 358.745240 • Safety • Assembly • Operation • Maintenance • EspaSol ® Read and follow all Safety Rules and Operating WARNING: Instructions before first use of this product. For answers to your questions about this product:...
Page 2
ELECTRIC WEEDWACKER ® LINE TRIMMER If this Craftsman Electric Weedwacker ® Line Trimmer fails to perform properly due to a defect in material or workmanship within (1) one year from the date of purchase, Sears will replace it free of charge.
Page 3
available.) Always wear face or dust • To reduce risk of electrical shock, mask if operation is dusty. Always use extension cords specifically wear heavy, long pants, long sleeves, marked as suitable for outdoor ap- boots, and gloves. Do not go barefoot pliances having electrical rating not or wear sandals.
Page 4
• Store unit indoors in a high, dry all parts are securely fastened. place out of the reach of children. . Use only Craftsman replacement Store unit unplugged. parts and accessories as recom- mended.
Page 5
CARTON CONTENTS NOTE: Edge guide must be positioned Check carton contents against the fol- on shield prior to installation on motor lowing list. housing (see following illustration). Model 358.745240 • Trimmer Edge C • Shield • Assist Handle with wing nut and bolt Examine parts for damage.
Page 6
KNOW YOUR TRIMMER READ THiS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNI]_ Compare the illustrations with your unit to familiarize yourself with the loca- tion of the various controls and adjustments, Save this manual for future refer- ence, Trigger Switch Assist Handle Cord...
Page 7
CORRECT OPERATING POSITION TRIMMING Hold the bottom of the trimmer head about 3 inches (8 cm) above the ground and at an angle. Allow only the tip of the line to make contact. Do not force trimmer line into work area. Trimming Trimming 3 inches (8 q...
SWEEPING The fanning action of the rotating line can be used for a quick and easy clean up. Keep the line parallel to and above the surfaces being swept and move the tool from side to side. CUSTOMER RESPONSIBILITIES WARNING: Disconnect power source before performing maintenance.
3. Replace with a pre-wound spool notch; otherwise, the unit will not t#71-85837);,or cut a length of 30 function properly. eet of 0.065 (1.65 mm) diameter Craftsman® Pro Trimmer line. Use of heavier lines could overload Small and damage unit. H°l e_!_(_ _//"_'----Spool ta0?
Page 10
TROUBLESHOOTING TABLE WARNING: Always stop unit and disconnect from the power source before performing all of the recommended remedies below except remedies that re- quire unit to be operating, REMEDY TROUBLE CAUSE Trimmer head 1. Allow tip of line to do the cutting, 1.